DISCLAIMER OF LIABILITY
By accepting delivery of your Alien Gear Holsters™ order you acknowledge and agree to the following
conditions:
Firearms are dangerous instruments and should be handled only by responsible persons who have completed
a certified training course in the safe handling and use of firearms. YOU, THE CONSUMER, ASSUME ANY AND
ALL RISK ASSOCIATED WITH THE PURCHASE AND USE OF ALIEN GEAR HOLSTERS™ PRODUCTS. BECAUSE
TEDDER INDUSTRIES, LLC D/B/A ALIEN GEAR HOLSTERS™ HAS NO CONTROL OVER HOW ITS PRODUCTS WILL
BE USED, OR WHO SUCH PRODUCTS WILL BE USED BY AFTER PURCHASE, TEDDER INDUSTRIES, LLC D/B/A
ALIEN GEAR HOLSTERS™ DISCLAIMS ANY AND ALL LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
TO PERSON(S) AND/OR PROPERTY RESULTING FROM THE USE OF ANY ALIEN GEAR HOLSTERS™ PRODUCTS. YOU,
THE CONSUMER, ASSUME ALL RISK OF PERSONAL INJURY OR DEATH CLAIMS AS A RESULT OF YOUR USE OF ALIEN
GEAR HOLSTERS™ PRODUCTS.
It is your responsibility as the consumer to personally check and ensure the fit, function, and compatibility of
your Alien Gear Holsters™ product with your particular handgun, apparel, and working conditions. Although
Alien Gear Holsters™ makes every effort to construct its products to fit the most current handgun models,
manufacturers of handguns constantly update their products. Slight manufacturing changes in a handgun
model can affect the proper and safe fit of your handgun and holster. Loose or ill-fitting apparel may interfere
with proper fit or function of Alien Gear Holsters™ products. Some environments or working conditions are
not conducive to the use of Alien Gear Holsters™ products. You, the consumer, are ultimately responsible for
determining whether your particular usage of your Alien Gear Holsters™ product, with your particular handgun,
apparel, and working conditions, is safe and appropriate. Alien Gear Holsters™ will not be responsible for
changes to handgun models, variations from standards, or for typographical or other errors which may occur in
the ordering of a product from Alien Gear Holsters™.
Alien Gear Holsters™ products are designed to fit factory equipped handguns. The use of trigger shoes or grip
adapters, laser sights or any other alterations to the frame, or dimensions of the handgun itself, may cause
improper holster fit and negligent discharge. Do not alter your Alien Gear Holsters™ product in any way. An
alteration to your Alien Gear Holsters™ product may result in an unsafe fit for your handgun and possible
negligent discharge. Do not use your Alien Gear Holsters™ product with any firearm for which it was not
designed or intended.
Never place a loaded handgun in a holster without first testing holster and handgun compatibility and fit using
your handgun in an unloaded condition (double-check to make sure the chamber is empty). For information on
how to safely carry your particular handgun, please refer to your handgun manufacturer’s safety and instruction
manual.
Practice holstering and drawing your handgun, and wearing your holster, with your handgun unloaded until you
are comfortable with fit, compatibility, and usage, before using your holster in non-test conditions or with a
loaded handgun. Make certain that your handgun is securely seated in the holster each time you holster your
handgun before removing your hand from the grip. A handgun must snugly fit in its holster to guard against
accidental separation of the handgun from the holster. Never place your hand in front of the firearm barrel while
trying to holster or un-holster your firearm. Keep your finger off the trigger until you are ready to shoot. Keep
fingers off the trigger and out of the trigger guard when drawing or replacing the handgun in the holster and at
all times while your handgun is holstered.
LEVEL 2 DUTY HOLSTER
USER GUIDE
[Follow all instructions and guidance in your Alien Gear Holsters™ product Use and Care Guide/Instruction
Manual/Owner’s Manual.] Should your holster become worn, loose, defective, or ill-fitting at any time,
immediately cease use of your holster and contact Alien Gear Holsters™ for warranty coverage instructions.
For questions, please email:
[email protected]
HOLSTER OPERATION
1
GET A FIRING GRIP AND USE THE
THUMB SWIPE
Get a good firing grip on the pistol, and use your
shooting hand thumb to push the thumb swipe
lever back. This releases the ejection port lock.
2
DRAW
After you’ve disengaged the active
retention, draw the pistol straight up.
PATENT PENDING
UG-VERSION-8/24
ADJUSTABLE RETENTION
If you want to adjust passive retention,
start by inserting your unloaded pistol
into the holster. Use the provided hex
key (3/32") to adjust the two buttonhead screws on the bottom of the
holster shell.
">
