Magnification Lens
Light Source
Assembly/Disassembly:
NOTE: This product is a spring-loaded device; improper assembly may cause ejection
of the forceps tip.
2. To attach the magnification lens, snap the lens onto the neck of the light source so
that the top of the lens angles towards the forceps tip.
3. To disassemble, push down on the forceps and rotate counter clockwise to remove
the forceps from the light source. The light will go off when the forceps are removed.
Instructions for Foreign Body Removal
1. Examine the ear or nose to determine the location of the foreign body.
2. Assemble the Lighted Forceps for Foreign Body Removal according to instructions.
3. Insert the Lighted Forceps tip until it reaches the foreign body. Once there, squeeze
the spring grip to grasp the object and gently pull from the orifice.
4. Repeat the exam and determine location of any remaining part of the foreign body.
5. Repeat the procedure until foreign body is removed.
6. Remove and dispose of the single-use forceps.
The Lighted Forceps for Foreign Body Removal tip is intended for single-patient use.
The light source and magnification lens are designed for multi-procedure use.
Do not dispose of the light source or magnification lens.
A light source and lens are provided in each box of product.
Obelis s.a • Boulevard Général Wahis 53
1030 Brussels, BELGIUM • Tel: +(32) 2.732.59.54
Fax: +(32) 2.732.60.03 • E-Mail: [email protected]
Bionix Development Corp. • 5154 Enterprise Blvd.
Toledo, OH, 43612 • U.S.A. • Phone: 800-551-7096
Fax: 800-455-5678 • www.Bionix.com
©2014 Bionix Development Corp.
5154 Enterprise Blvd. Toledo, OH 43612
www.Bionix.com
RM75-0300 Rev. 11/11/14
Phone: 800.551.7096
Fax: 800.455.5678
www.Bionix.com
Reorder #2750
• Made in The U.S.A.
• Non-Sterile
• For Single-Use Only
• Caution: Federal law
restricts this device
to sale by or on the
order of a licensed
medical professional.
• Patent Pending
CONTENTS:
10 Forceps, 1 Light Source,
1 Magnification Lens
SEE INSTRUCTIONS ON THE BACK OF THIS BOX
*The Bionix Light Source is designed to effectively illuminate the quantity of single use forceps supplied in this package.
Lighted Forceps for Foreign Body Removal
Lighted Forceps for Foreign Body Removal
1. To assemble the Lighted Forceps for Foreign Body Removal, insert the end of the
forceps into the light source by aligning the pegs on the end of the forceps with the
grooves inside the light source. Push down and twist FIRMLY clockwise until rotation
stops. This will lock the forceps into place and activate the light.
">
