advertisement
▼
Scroll to page 2
of 46
Disclaimer This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim of copyright and all copyrights remain the property of their respective owners. About FixYourDLP.com FixYourDLP.com (http://www.fixyourdlp.com) is the World’s #1 resource for media product news, reviews, do-it-yourself guides, and manuals. Informational Blog: http://www.fixyourdlp.com Video Guides: http://www.fixyourdlp.com/guides User Forums: http://www.fixyourdlp.com/forum FixYourDLP’s Fight Against Counterfeit Lamps: http://www.fixyourdlp.com/counterfeits Sponsors: RecycleYourLamp.org – Free lamp recycling services for used lamps: http://www.recycleyourlamp.org Lamp Research - The trusted 3rd party lamp research company: http://www.lampresearch.com Discount-Merchant.com – The worlds largest lamp distributor: http://www.discount-merchant.com Sponsored by DM Projector CP-X1230 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in this manual. • The reproduction, transmission or use of this document or contents is not permitted without express written authority. TRADEMARK ACKNOWLEDGMENT : • VGA and XGA are registered trademarks of the International Business Machines Corporation. • Apple and Mac are registered trademarks of Apple Computer, Inc. • VESA and SVGA are trademarks of the Video Electronics Standard Association. • Windows is a registered trademark of Microsoft Corporation. • Internet Explorer is a trademark of Microsoft Corporation. All other trademarks are the property of their respective owners. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 1 Projector Features This multimedia projector is used to project various computer signals as well as NTSC/PAL/SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. ●Ultra High Brightness Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system. ●Whisper Mode Equipped Special mode is available for reducing projector noise to achieve quieter operation. ●User Memory Function This projector can memorize 4 settings by MY MEMORY function. ●Partial Magnification Function Interesting parts of images can be magnified for closer viewing. ●Keystone Distortion Correction Quick correction of distorted images electrically. Preparation Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”. Your projector should come with the items shown there. Contact your dealer anything is missing. NOTE • Keep the original packing material for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 2 Contents Projector Features ···························2 Preparation·······································2 Part Names ·······································4 Projector ·········································4 Control Buttons ·······························5 Remote control ·······························5 Setting Up·········································6 Arrangement ···································6 Adjusting The Projector’s Elevator···········································7 Connecting Your Devices ···············8 Connecting The Power Supply ·····11 Remote Control······························12 Putting Batteries ···························12 Operating The Remote Control·····························13 Power ON/OFF ·······························14 Turning On The Power ·················14 Turning Off The Power ·················14 Operating········································15 Selecting An Input Signal··············15 Selecting The Aspect Ratio ··········16 Using The Automatic Adjustment Feature ······················16 Adjusting The Picture Position······17 Correcting The Keystone Distortion·······································17 Adjusting The Volume···················18 Muting The Sound ························18 Temporarily Blanking The Screen ···································18 Freezing The Screen ····················19 Using The Magnify Feature ··········19 Displaying The Child Window ·······20 Selecting An Audio Input ··············20 Multifunctional Settings ················21 Using The Menu Functions···········21 MAIN Menu···································22 PICTURE-1 Menu·························23 PICTURE-2 Menu·························25 INPUT Menu ·································26 AUTO Menu··································28 SCREEN Menu·····························30 OPTION Menu ······························32 Lamp ···············································34 Replacing The Lamp·····················35 Air Filter ··········································36 Caring For The Air Filter ···············36 Other Care ······································37 Caring For The Inside Of The Projector ································37 Caring For The Lens·····················37 Caring For The Cabinet And Remote Control·····························37 Troubleshooting ····························38 Related Messages ························38 Regarding The Indicator Lamps ···········································40 Phenomena That May Easily Be Mistaken For Machine Defects ·····42 Warranty And After-Service··········44 Specifications ································44 TECHNICAL T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 3 Part Names Projector 6 3 5 1 2 4 1 2 3 4 5 Elevator button Elevator foot Remote sensor Lens cap Lens The picture is projected from here. 6 Filter cover An air filter is inside. Projector (Front/Right) 9 AB G D E F 3 K C HI J 7 8 Projector (Rear/Left) A B C D E F G H I J K 3 7 8 9 RGB port RGB OUT port BNC port AUDIO IN 1 port AUDIO IN 2 port CONTROL port AUDIO OUT port AUDIO IN R/L port VIDEO IN port S-VIDEO port COMPONENT port Remote sensor AC Inlet Power switch Control buttons See the following page. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 4 Part Names (continued) Control Buttons 8 9 y INPUT KEYSTONE 6 RGB SEARCH BNC VOLUME 4 t ENTER COMPONENT FOCUS ZOOM RESET 0 r S-VIDEO - 1 STANDBY/ON button and STANDBY/ON indicator 2 TEMP indicator 3 LAMP indicator 4 VOLUME buttons 5 INPUT dial 6 SEARCH button 7 KEYSTONE button 8 RGB indicator 9 BNC indicator 0 COMPONENT indicator - S-VIDEO indicator = VIDEO indicator q ZOOM buttons w FOCUS buttons e Cursor buttons / / / r MENU button t RESET button y ENTER button 7 5 MENU e VIDEO = TEMP STANDBY/ON w LAMP q 2 3 1 Control Panel on the Projector Remote Control 1 STANDBY/ON button 20 19 6 4 VOLUME button 6 7 q w e SEARCH button KEYSTONE button ZOOM buttons FOCUS buttons Cursor buttons / / / r MENU button t RESET button y ENTER button 1 22 23 24 VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY 26 VOLUME ON 28 25 KEYSTONE FREEZE 14 4 MUTE OFF 27 21 BLANK 7 - FOCUS + - ZOOM 13 16 ENTER ESC RGB button VIDEO button BLANK button AUTO button PinP button ASPECT button MUTE button MAGNIFY buttons FREEZE button POSITION button ESC button + MENU POSITION u i o p [ ] \ a s d f RESET 17 T HET RUS T E DS OU29 RCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 18 Remote Control 5 Setting Up Arrangement WARNING • Before installation, make sure that the projector is turned off and the power code is disconnected. • Do not set up and move the projector, while it is hot. • Install the projector in a suitable environment according to instructions of the “User’s Manual – Safety Guide” and this manual. • The power outlet should be close to the projector and easily accessible. Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. (±10%) Reference for the 4:3 aspect ratio C A Screen C B Reference for the 16:9 aspect ratio C A Screen D C 40(1.0) B [inch (m)] min. max. 46(1.2) 71(1.8) 60(1.5) 71(1.8) 107(2.7) 36(91) 70(1.8) 83(2.1) 126(3.2) 42(107) A [inch (m)] C [inch (cm)] 24(61) 80(2.0) 95(2.4) 144(3.7) 48(122) 100(2.5) 120(3.0) 181(4.6) 60(152) 120(3.0) 144(3.7) 217(5.5) 72(183) 150(3.8) 181(4.6) 272(6.9) 90(229) 200(5.1) 243(6.2) 364(9.2) 120(305) 250(6.4) 304(7.7) 455(11.6) 150(381) 300(7.6) 366(9.3) 547(13.9) 180(457) 350(8.9) 427(10.9) 638(16.2) 210(533) 400(10.2) 489(12.4) 730(18.5) 240(610) 500(11.4) 612(15.5) 913(23.2) 300(762) 40(1.0) B [inch (m)] C min. max. [inch (cm)] 50(1.3) 77(2.0) 20(50) 60(1.5) 77(2.0) 117(3.0) 29(75) 34(87) 70(1.8) 91(2.3) 137(3.5) 34(87) 40(102) A [inch (m)] D [inch (cm)] 23(58) 80(2.0) 104(2.6) 157(4.0) 39(100) 46(116) 100(2.5) 131(3.3) 197(5.0) 49(125) 57(145) 120(3.0) 158(4.0) 237(6.0) 59(149) 69(174) 150(3.8) 198(5.0) 297(7.5) 74(187) 86(218) 200(5.1) 265(6.7) 396(10.1) 98(249) 114(291) 250(6.4) 332(8.4) 496(12.6) 123(311) 143(363) 300(7.6) 399(10.1) 596(15.1) 147(374) 172(436) 400(10.2) 533(13.5) 795(20.2) 196(498) 229(581) 450(11.4) 600(15.2) 895(22.7) 221(560) 257(654) T HET RUS T E DS OURCEF ORPRO J E CT OR L AM696(17.1) PSAN172(436) DACCE S S ORI E S 350(8.9) 466(11.8) 200(508) B 6 Setting Up (continued) Adjusting The Projector's Elevator WARNING • Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn. CAUTION • To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. 1 2 3 Press and hold in the elevator buttons. Elevator buttons Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position. As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand. Elevator feet T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 7 Setting Up (continued) Connecting Your Devices WARNING • Whenever attempting to connect other devices to the projector, read thoroughly the "User's Manual - Safety Guide", this manual and the manual of each device to be connected. Incorrect connecting could result in fire or electrical shock. CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. ATTENTION • Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector. Refer to the section “Technical” of this manual for the pin assignment of connectors and RS-232C communication data. • Some cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector. • Secure the screws on the connectors and tighten. • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. NOTE • Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. • When the image resolution is changed on a computer, depending on an input, automatic adjust function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or TFT monitors to change the resolution. NOTE Plug-and-Play Capability • Plug-and-Play is a system incorporated in the computer, its operating system and peripheral equipment (i.e. display devices). • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S compatible. • Please take advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted. • Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor. 8 Setting Up (continued) Please refer to the following (for example) for connecting your devices. See the rear of the projector. You can see the ports. Examples of connection with a computer Computer Projector A RGB out RGB cable RGB Audio out Stereo Mini cable AUDIO IN 1 D D AUDIO IN 1 F CONTROL A AUDIO IN2 F RS-232C port RS-232C cable R/CR/PR REMOTE CONTROL RGB OUT RGB G/Y B/CB/PB H AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC CONTROL ■ If using a BNC input C R/CR/PR G/Y B/CB/PB H RGB out BNC cable V R/CR/PR G/Y B/CB/PB H V CONTROL E REMOTE CONTROL AUDIO IN 1 AUDIO IN2 R/CR/PR RGB OUT RGB G/Y B/CB/PB C H AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC E Audio out Stereo Mini cable AUDIO IN 2 T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 9 Setting Up (continued) Examples of connection with a VCR/DVD Player VCR/DVD Player Projector CONTROL REMOTE CONTROL AUDIO IN 1 R-AUDIO IN-L VIDEO Audio out (R) Audio out (L) Video out R-AUDIO IN AUDIO IN-L VIDEO IN AUDIO IN2 H I R/CR/PR RGB OUT RGB G/Y B/CB/PB H AUDIO OUT CR /PR CB/PB Y HI V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC ■ If using a s-video signal J S-video out S-video cable S -VIDEO CONTROL REMOTE CONTROL AUDIO IN 1 AUDIO IN2 RGB OUT RGB AUDIO OUT R-AUDIO IN AUDIO IN-L Audio out (R) Audio out (L) R/CR/PR G/Y B/CB/PB H CR /PR CB/PB Y H R-AUDIO IN-L VIDEO V J R - AUDIO IN - L VIDEO IN S-VIDEO IN H BNC ■ If using a component signal COMPONENT CR/PR out CB/PB out Y out CR/PR CB/PB Y K CONTROL R/CR/PR R-AUDIO IN-L VIDEO Audio out (R) Audio out (L) R-AUDIO IN AUDIO IN-L K H REMOTE CONTROL AUDIO IN 1 AUDIO IN2 RGB OUT RGB G/Y B/CB/PB H AUDIO OUT V CR /PR CB/PB Y R - AUDIO IN - L VIDEO IN S-VIDEO IN H BNC ■ If using a SCART RGB input COMPONENT R-AUDIO IN-L VIDEO CONTROL R (CR/PR) K B (CB/PB) K SCART HI G (Y) RGB out IN T HET RUS T E DS OURCEF ORR-AUDIO PROJ E CT O RL AMPSANDACCE S S ORI E S H AUDIO IN-L SCART VIDEO IN I adapter REMOTE CONTROL AUDIO IN 1 AUDIO IN2 R/CR/PR RGB OUT RGB G/Y B/CB/PB H AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC 10 Setting Up (continued) Connecting to a monitor CONTROL B AUDIO IN 1 AUDIO IN2 Monitor Projector R/CR/PR RGB OUT RGB G/Y B/CB/PB H REMOTE CONTROL AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN B RGB in RGB cable BNC RGB OUT Connecting to a speaker (with amplifier) Speaker AUDIO IN2 Projector R/CR/PR G Audio in Stereo Mini cable CONTROL G REMOTE CONTROL AUDIO IN 1 RGB OUT RGB G/Y B/CB/PB H AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC AUDIO OUT Connecting The Power Supply WARNING • Use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock. Please adhere to the “User’s manual – Safety Guide” and the following. • Only plug the power cord into outlets rated for use with the power cord’s specified voltage range. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug. • Make sure that you firmly connect the power cord to the projector and wall outlet. 1 Connect the connector of the power cord to the AC inlet of the projector. 2 Firmly plug the power cord’s plug into the outlet. AC Inlet Outlet Connector Plug T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 11 Remote Control Putting Batteries CAUTION • About the battery Keep a battery away from children and pets. Use only the battery specified: two AA batteries. Do not mix new battery with used one. Make sure the plus and minus terminals are correctly aligned when loading the battery (as indicated in the remote control). • Dispose of batteries in accord with environmental laws. • • • • 1 Remove the battery cover. Slide back and remove the battery cover in the direction of the arrow. 2 Insert the batteries. Align and insert the two AA batteries according to their plus minus terminals (as indicated in the remote control). 3 Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 12 Remote Control (continued) Operating The Remote Control CAUTION • Do not disassemble the remote control. • Do not place the remote control near the projector’s lens, fan, or vents. • Do not drop or otherwise expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects on it. Doing so may result in malfunction. • Remove the batteries from the remote control and store them in a safe place if you won't be using the remote control for an extended period. NOTE • Replace the batteries whenever the remote control starts to malfunction. • When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. es gre de 20 degrees 20 es gre de 20 20 degrees • The remote control works with the projector’s remote sensor. • Front remote sensor is 3 meters with a 40 degree range (20 degrees to the left and right of a remote sensor). Rear remote sensor is 3 meters with a 40 degree range (20 degrees to the left and approximately approximately 3 meters 3 meters right of a remote sensor). • Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the sensor directly, please try. • Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 13 Power ON/OFF WARNING • When the power is ON, a strong light is emitted. Do not look into the lens or vents of the projector. NOTE • Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices. Turning On The Power STANDBY/ON 1 Remove the lens cap. 2 Set the power switch to [ | ] (ON). The STANDBY/ON indicator will light to solid orange. 3 Press the STANDBY/ON button. The projector lamp will light up and the STANDBY/ON indicator will begin blinking green. When the power is completely on, the indicator will stop blinking and light green. 4 Select an input signal according to the section “Selecting An Input Signal” of the following page. STANDBY/ON button / indicator VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY BLANK VOLUME STANDBY/ON button Power switch (ON position) Turning Off The Power 1 2 Press the STANDBY/ON button. The message “Power off?” will appear on the screen for approximately 5 seconds. Press the STANDBY/ON button again while “Power off?” the message is visible. The projector lamp will go off, and the STANDBY/ON indicator will begin blanking orange. Then the STANDBY/ON indicator will stop blinking and light to solid orange when the lamp cooling is complete. STANDBY/ON STANDBY/ON button / indicator VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY BLANK VOLUME STANDBY/ON button T HET RUS T E DS OURCEF ORPROJ E CT ORPower L AMP SAN DA CCE S S ORI E S switch (OFF position) 14 3 Switch the power switch to [O] (OFF). The STANDBY/ON indicator will go off. 4 Attached the lens cap. Operating Selecting An Input Signal 1 Select an input signal. ■ Using the INPUT dial Turn the INPUT dial of the projector. Turning the dial cycles through the input ports as shown below. Select the signal you wish to project. SEARCH button INPUT KEYSTONE RGB SEARCH BNC ENTER COMPONENT RGB BNC COMPONENT RESET S-VIDEO MENU VIDEO STANDBY/ON VIDEO S-VIDEO TEMP LAMP INPUT dial ■ Using SEARCH button Press the SEARCH button of the projector or the remote control. Pressing the button automatically cycles through input ports and displays the picture of retrieved signal. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will turn to the state it was in prior to the search. RGB BNC COMPONENT VIDEO VIDEO button VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY S-VIDEO MUTE OFF KEYSTONE FREEZE Press the RGB button of the remote control. Pressing the button toggles between the RGB ports as shown below Select the signal you wish to project. - FOCUS + - ZOOM + MENU POSITION ENTER RESET ESC RGB SEARCH button VOLUME ON ■ Using RGB button BLANK RGB button BNC ■ Using VIDEO button Press the VIDEO button of the remote control. Pressing the button toggles between the VIDEO ports as shown below Select the signal you wish to project. COMPONENT S-VIDEO VIDEO FOCUS FOCUS buttons ZOOM ZOOM buttons T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 2 Use the ZOOM buttons to adjust the screen size. 3 Use the FOCUS buttons to adjust the focus. 15 Operating (continued) Selecting The Aspect Ratio 1 Press the Aspect button to toggle between the modes for aspect ratio. ■ At a RGB signal 4:3 16:9 VIDEO RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY VOLUME ON ■ At a video signal / no signal 4:3 16:9 SMALL ASPECT button MUTE OFF KEYSTONE FREEZE - FOCUS - + ZOOM + MENU POSITION memo At a HDTV signal of 1125i(1080i) or 750p(720p), ENTER only 16:9 can be selected. RESET ESC Using The Automatic Adjustment Feature memo The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input. 1 Press the AUTO button. ■ At a RGB signal The Vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and horizontal size (H SIZE) will be automatically adjusted. memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting. ■ At a video signal VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY BLANK VOLUME ON MUTE OFF KEYSTONE FREEZE - FOCUS + - ZOOM + AUTO button MENU POSITION ENTER ESC RESET The signal type mode best suited for the respective input signal will be selected automatically. memo This function is available only when the AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, theF signal type isE identified T HE T RUS T E D S O URCE O RP ROJ CT ORL AMPSANDACCE S S ORI E S automatically independently of this function. 16 Operating (continued) Adjusting The Picture Position memo This function is available only for RGB signals. 1 Press the POSITION button. As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the position. VIDEO RGB SEARCH ASPECT PinP AUTO POSITION VOLUME ON MUTE OFF KEYSTONE FREEZE 2 3 BLANK MAGNIFY Use the cursor buttons / / / to adjust the position. memo When you want to initialize the position, press the RESET button during adjustment. - FOCUS + - ZOOM + MENU POSITION POSITION button ENTER Cursor buttons RESET ESC Press the POSITION button again to close the dialog and complete this operation. memo Even if you don't do anything, the dialog will automatically disappear after a few seconds. RESET button Correcting The Keystone Distortion 1 Press the KEYSTONE button. As illustrated on the right, a dialog will appear on the screen to aid you in correcting the keystone distortion. KEYSTONE VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY MUTE OFF 2 Use the cursor buttons / to select the direction of distortion to correct ( or ). KEYSTONE FREEZE - +0 +0 BLANK VOLUME ON FOCUS - + ZOOM + MENU POSITION ENTER 3 Use the cursor buttons distortion. / to correct the ESC KEYSTONE button Cursor buttons RESET Press the KEYSTONE button again to close the dialog and complete this operation. memo Even if you don't do anything, the dialog will automatically disappear after a few seconds. T HE T RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S memo When this adjustment is excessive, certain degradation may appear on the picture. Also, please note that it may not function correctly with some input. 4 17 Operating (continued) Adjusting The Volume 1 Press the VOLUME button. As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the volume. VOLUME VIDEO RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY VOLUME ON MUTE OFF 2 Use the cursor buttons adjust the volume. / to KEYSTONE FREEZE - FOCUS + 16 - ZOOM + MENU POSITION 3 VOLUME button Cursor buttons ENTER Press the VOLUME button again to close the dialog and complete this operation. RESET ESC memo Even if you don't do anything, the dialog will automatically disappear after a few seconds. Muting The Sound 1 Press the MUTE button. As illustrated on the right, a dialog will appear on the screen indicating that you have muted the sound. VIDEO RGB SEARCH ASPECT PinP AUTO VOLUME BLANK MAGNIFY VOLUME ON MUTE OFF KEYSTONE FREEZE - FOCUS + - ZOOM Press the MUTE or VOLUME button to restore the sound. + MENU POSITION 2 MUTE button ENTER 16 RESET ESC memo Even if you don't do anything, the dialog will automatically disappear after a few seconds. Temporarily Blanking The Screen 1 Press the BLANK button. The input signal screen will shut off, and a BLANK screen will appear. memo You can set the BLANK screen using the menu. Please refer to the item “BLANK” of the VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY BLANK VOLUME ON BLANK button MUTE OFF KEYSTONE FREEZE - FOCUS + - ZOOM + T HE T RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S table of the section “SCREEN Menu”. MENU POSITION ENTER 2 18 Press the BLANK button again to remove the blank screen, and return to the input signal screen. ESC RESET Operating (continued) Freezing The Screen 1 Press the FREEZE button. As illustrated on the right, a dialog will appear on the screen, and the screen will freeze at the current image. FREEZE VIDEO RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY VOLUME ON MUTE OFF 2 Press the FREEZE button again to restore the screen to normal. The icon “||” will change to the icon “ ”. And after a couple of seconds, the dialog will be closed and the screen will be restored to normal. KEYSTONE FREEZE - FREEZE button FOCUS - + ZOOM + MENU POSITION ENTER RESET ESC memo The freezing feature will automatically finish if a remote control’s button that changes some display state (ex. blanking the screen, displaying a dialog or a menu, adjusting the picture, changing the input signal) is pressed, or a button of projector is pressed. NOTE • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long. Using The Magnify Feature 1 Press the MAGNIFY button. As illustrated on the right, a dialog will appear on the screen to aid you in magnifying the picture. ON VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY MAGNIFY VOLUME ON MUTE OFF KEYSTONE FREEZE 2 Press the POSITION button, then use the cursor buttons / / / to select the area to zoom. BLANK - FOCUS + - ZOOM ENTER 3 Press the POSITION button again to finalize the zoom area. 4 Use the cursor buttons level. 5 Press the MAGNIFY button again to close the dialog and complete this operation. / ESC POSITION button + MENU POSITION MAGNIFY buttons Cursor buttons RESET to adjust the zoom T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S OFF memo The magnify feature will automatically finish if the automatic adjustment is execute, or the aspect, the signal type mode of video or the signal input state is changed. 19 Operating (continued) Displaying The Child Window memo This feature called "PinP (Picture in Picture)" is available only when a RGB signal is selected to main screen. 1 Press the PinP button. The child window with a picture of a video signal will appear. VIDEO RGB SEARCH ASPECT PinP AUTO BLANK MAGNIFY VOLUME ON 2 Press the PinP button again to change the size of the child window or close the window. Small child window PinP button MUTE OFF KEYSTONE FREEZE - FOCUS + Large child window - ZOOM + MENU POSITION No child window ENTER RESET ESC memo You can select the video signal to display in the child window, and the position of the child window. Please refer to the items “P.INP. INPUT” and “P.INP. POSIT.” of the table of the section “INPUT Menu”. Selecting An Audio Input memo This feature is available only when the child window is on the screen. 1 When the child window is on the screen, press the VOLUME button. As illustrated on the right, a dialog will appear on the screen. VOLUME RGB Video VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY MUTE OFF 2 Use the cursor buttons select an audio input. / to KEYSTONE FREEZE 16 RGB (Audio input for the main screen) BLANK VOLUME ON - FOCUS + - ZOOM + MENU POSITION ENTER Video (Audio input for the child window) ESC VOLUME button Cursor buttons RESET memo You also can adjust the volume using the cursor buttons / . Please refer to the section “Adjusting The Volume”. T RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 3THE dialog and complete this operation. Press the VOLUME button again to close the memo Even if you don’t do anything, the dialog will automatically disappear after a few seconds. 20 Multifunctional Settings Using The Menu Functions This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION and NETWORK. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1 ex. Turning off the built-in speaker Press the MENU button. The menu will appear on the screen. VIDEO RGB SEARCH ASPECT PinP AUTO MAGNIFY MUTE OFF KEYSTONE FREEZE 3 - FOCUS + Use the cursor buttons / to select a menu, then press the (or the ENTER) button to progress. The display of the selected menu will appear. - ZOOM MENU button + MENU POSITION ENTER ESC MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION VOLUME ON 2 1) Press the MENU button. BLANK RESET Cursor buttons RESET button +0 +0 4:3 NORMAL NORMAL ENGLISH BRIGHT CONTRAST ASPECT WHISPER MIRROR LANGUAGE [Language] RESET : SELECT 2) Select the “OPTION” using the button, then press the button. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION VOLUME SPEAKER IR REMOTE LAMP TIME FILTER TIME SERVICE RESET MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION 16 TURN ON 1234 h 4321 h : SELECT VOLUME SPEAKER IR REMOTE LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON 1234 h 4321 h : SELECT ESC button Use the cursor buttons / to select an item, then press the (or the ENTER) button to progress. The operation display of the selected item will appear. 3) Select the “SPEAKER” using the button, then press the button. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION VOLUME SPEAKER IR REMOTE LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON 1234 h 4321 h OPTION SPEAKER TURN ON TURN OFF : SELECT 4 Use the cursor buttons / to operate the item. memo When you want to reset the adjustment, press the RESET button during the operation. Note that the items whose functions are performed simultaneously with operating (ex. LANGUAGE, WHISPER, H PHASE etc.) are not reset. memo When you want to return to the previous display, press the or ESC button. 4) Use the cursor button to select the “TURN OFF”. OPTION SPEAKER TURN ON TURN OFF T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 5 Press the MENU button again to close the menu display and complete this operation. 5) Press the MENU button. memo Even if you don’t do anything, the menu will automatically disappear after a few seconds. 21 Multifunctional Settings (continued) MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION MAIN Menu With the MAIN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item BRIGHT CONTRAST ASPECT WHISPER BRIGHT CONTRAST ASPECT WHISPER MIRROR LANGUAGE [Language] RESET +0 +0 4:3 NORMAL NORMAL ENGLISH : SELECT Description Adjust the brightness using the Adjust the contrast using the / / buttons. : buttons. : Light Dark Strong Weak Select an aspect ratio using the / buttons. : ■ At a RGB signal 4:3 16:9 ■ At a video signal 4:3 16:9 SMALL memo At a HDTV signal of 1125i(1080i) or 750p(720p), only the 16:9 can be selected. Select the NORMAL or the WHISPER using the / buttons. : NORMAL WHISPER When the WHISPER is selected, acoustic noise and screen brightness are reduced. Select a mirror status using the / buttons. : NORMAL H:INVERT V:INVERT H&V:INVERT MIRROR ex. Select a menu language using the / buttons. : ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO LANGUAGE NORSK NEDERLANDS 日本語 PORTUGUÊS RESET SVENSKA SUOMI POLSKI Select the EXECUTE using the button to reset the MAIN menu items. : EXECUTE CANCEL The items of the MAIN menu are collectively returned to the initial setting. Note that the items “WHISPER” and “LANGUAGE” are not reset. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 22 Multifunctional Settings (continued) MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION PICTURE-1 Menu With the PICTURE-1 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item GAMMA COLOR BAL R COLOR BAL G COLOR BAL B SHARPNESS COLOR TINT MY MEMORY NORMAL +0 +0 +0 +0 +0 +0 LOAD1 : SELECT Description Select a gamma mode using the / buttons. : NORMAL CINEMA DYNAMIC CUSTOM Selecting the CUSTOM and then pressing the (or the ENTER) button calls the CUSTOM menu. CUSTOM Menu GAMMA 2.2 GAMMA Select an item using the / buttons, and press the NORMAL CINEMA HIGH COLOR TEMP DYNAMIC 100 R (or the ENTER) button to perform each function. CUSTOM 100 G 100 B GAMMA COLOR TEMP R G B memo The R, G and B can be selected only when the : SELECT USER is selected under the COLOR TEMP. GAMMA GAMMA COLOR TEMP Adjust the gamma data using the Up Down Select a color temperature using the HIGH MIDDLE LOW USER buttons. : / buttons. : R Adjust the red color level for the USER mode of the COLOR TEMP using the / buttons. : Strong Weak G Adjust the green color level for the USER mode of the COLOR TEMP using the / buttons. : Strong Weak B Adjust the blue color level for the USER mode of the COLOR TEMP using the / buttons. : Strong Weak COLOR BAL R Adjust the red color balance using the Strong Weak COLOR BAL G Adjust the green color balance using the Strong Weak COLOR BAL B Adjust the blue color balance using the Strong Weak SHARPNESS / / buttons. : / / buttons. : buttons. : Adjust the sharpness using the / buttons. : Clear Soft memo This item can be selected only at a video signal. Adjust the whole color using the / buttons. : T HCOLOR ET RUS T E DStrong S OUR CE F ORPROJ E CT ORL AMPSANDACCE S S ORI E S Weak memo This item can be selected only at a video signal. TINT Adjust the tint using the / buttons. : Green Red memo This item can be selected only at a video signal. (This table is continued to the following page.) 23 Multifunctional Settings (continued) PICTURE-1 Menu (continued) Item Description Select a command to load or save using the / buttons, and then press the (or the ENTER) button to perform the function.: LOAD1 LOAD2 LOAD3 LOAD4 SAVE1 SAVE2 SAVE3 SAVE4 MY MEMORY RESET This projector has 4 numbered memories for adjustment data. Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment data on the memory whose number corresponds with the command’s number. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the command’s number, and adjusts the picture automatically depending on the data. Select the EXECUTE using the button to reset the PICTURE-1 menu items. : EXECUTE CANCEL The items of the PICTURE-1 menu are collectively returned to the initial setting. Note that the items “MY MEMORY” and “GAMMA” of the CUSTOM menu under the item “GAMMA” are not reset. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 24 Multifunctional Settings (continued) PICTURE-2 Menu With the PICTURE-2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION V POSITION H POSITION H PHASE H SIZE OVER SCAN RESET 20 142 31 1344 95 : SELECT Description V POSITION Adjust the vertical position using the / buttons. : Up Down memo This item can be selected only at a RGB signal. H POSITION Adjust the horizontal position using the / buttons. : Left Right memo This item can be selected only at a RGB signal. H PHASE Adjust the horizontal phase to eliminate flicker using the / buttons. : Right Left memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART RGB. H SIZE Adjust the horizontal size using the / buttons. : Large Small memo This item can be selected only at a RGB signal. memo When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button during this operation. OVER SCAN Adjust the over-scan ratio using the / buttons. : Small Large memo This item can be selected only at a video signal. memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. memo The number displayed on the menu during this adjustment is just for your reference, and might not be exact display ratio. RESET Select the EXECUTE using the button to reset the PICTURE-2 menu items. : EXECUTE CANCEL The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the item “H PHASE” is not reset. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 25 Multifunctional Settings (continued) INPUT Menu With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION COLOR SPACE COMPONENT VIDEO 3D-YCS VIDEO NR P. INP. INPUT P. INP. POSIT. POWERUP INPUT AUTO COMPONENT AUTO TURN OFF LOW VIDEO RGB : SELECT Item Description COLOR SPACE Select a color space mode using the / buttons. : AUTO RGB SMPTE240 REC709 REC601 Selecting the AUTO automatically selects the optimum mode. memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART RGB. memo The AUTO operation may not work well at some signals. In such a case, select a suitable mode except the AUTO. COMPONENT Select a function of COMPONENT port using the / buttons. : COMPONENT SCART RGB When the SCART RGB is selected, the COMPONENT port function as a port for a SCART RGB signal input. Please refer to the section “Connecting Your Devices”. VIDEO Select a signal type mode using the / buttons. : AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL Selecting the AUTO automatically selects the optimum mode. memo This item is performs only at a video signal from the VIDEO port or the SVIDEO port. For a component video signal, the signal type is identified automatically independently of this function. memo The AUTO operation may not work well at some signals. If the picture becomes unstable (ex. a irregular picture, a color lack), please select the mode depending on the input signal. 3D-YCS Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the 3D-YCS mode works for a completely still image, or images with few motions. memo This item performs only at a video signal of NTSC3.58. memo When this function performs, the setting of the item “VIDEO NR” of this INPUT menu is not effective. Select a noise reduction level using the / buttons. : HIGH MIDDLE LOW The noise on screen is reduced according to the selected level. memo This item performs only at a video signal from the VIDEO port or the SVIDEO NR VIDEO port. AtF aO video of NTSC3.58, this function only when T HET RUS T E D S OU RCE RPsignal ROJ E CT ORL AM PS ANDperforms ACCE S S OR I E S the TURN OFF is selected to the item “3D-YSC” of this INPUT menu. memo When this adjustment is excessive, certain degradation may appear on the picture. (This table is continued to the following page.) 26 Multifunctional Settings (continued) INPUT Menu (continued) Item Description P.IN P. INPUT Select a signal input port for the child window using the / buttons. : VIDEO S-VIDEO memo About the child window, please refer to the section “Displaying the Child Window”. P.IN P. POSIT. Select the display position of the child window using the / buttons. : memo About the child window, please refer to the section “Displaying the Child Window”. POWERUP INPUT Select a signal input port to display just when the projector is turned on, using the / buttons. : LAST INPUT M1-D RGB BNC COMPONENT S-VIDEO VIDEO Selecting the LAST INPUT selects the port that was used at the last time. Pressing the (or the ENTER) button displays the INPUT INFORMATION menu. The INPUT INFORMATION menu shows the information about the current signal input as illustrated below. INFORMATION INPUT-INFORMATION RGB 1024x768 @60.0 FRAME LOCK INPUT-INFORMATION S-VIDEO SECAM AUTO INPUT-INFORMATION COMPONENT 575i @50 SCART RGB memo The “FRAME LOCK” message means the frame lock function is working. This function automatically works when a RGB signal with vertical frequency of 50 to 60 is input, and it displays a moving picture more smoothly. memo The “SCART RGB” message means the COMPONENT port is working as a SCART RGB port. Please refer to the item “COMPONENT” in this table. S2-ASPECT RESET Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, an S2-video signal can be identified and the optimum aspect ratio is automatically selected. memo This item is performs only at a S-VIDEO signal. memo When the ASPECT button is used or the item “ASPECT” of the MAIN menu is operated, the TURN OFF will be automatically selected to this item. Select the EXECUTE using the button to reset the INPUT menu items. : EXECUTE CANCEL The items of the INPUT menu are collectively returned to the initial setting. Note that the item “INFORMATION” is not reset. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 27 Multifunctional Settings (continued) AUTO Menu With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION ADJUST POWER OFF POWER ON SEARCH RESET 0 min TURN ON TURN ON : SELECT Item Description ADJUST Pressing the (or the ENTER) button performs the automatic adjustment. ■ At a RGB signal The vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically adjusted. And the aspect ratio (ASPECT) will be automatically selected. memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting. ■ At a video signal or s-video signal The signal type mode best suited for the respective input signal and the aspect ratio (ASPECT) will be selected automatically. And the vertical position (V POSITION), the horizontal position (H POSITION) will be automatically adjusted. ■ At a component video signal The vertical position (V POSITION), the horizontal position (H POSITION) and the clock phase (H PHASE) will be automatically adjusted. And the aspect ratio (ASPECT) will be automatically selected. memo This function is available only when the AUTO is selected to the item “VIDEO” of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. memo This operation requires approximately 10 seconds, and the message “AUTO IN PROGRESS” is displayed during the operation. memo This operation may not work well at some signals. If the picture becomes unstable (ex. a irregular picture, a color lack), please select the suitable mode to the item “VIDEO” of the INPUT menu. Set the time using the / buttons. : Long (max. 99 minutes) Short (min. 0 minute = DISABLE) POWER OFF AUTO POWER OFF ENABLE AUTO POWER OFF DISABLE 1min 0min ex. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with a proper signal (without no-signal and an unsuitable signal) reaches at the set time. Please refer to the section “Turning Off The Power”. T HET RUS T E D S OURCEF ORPROJ E CT ORL AMPSA/NDbuttons.: ACCE S S ORI E S Select the TURN ON or the TURN OFF using the POWER ON TURN ON TURN OFF When the TURN ON is selected, you can turn the projector on without pressing the STANDBY/ON button. Please refer to the section “Turning Off The Power”. (This table is continued to the following page.) 28 Multifunctional Settings (continued) AUTO Menu (continued) Item Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, detecting no signal cycles through input ports and displays the picture of retrieved signal. RGB BNC COMPONENT SEARCH VIDEO S-VIDEO memo When the TURN ON is selected, pressing the RGB button selects the RGB ports, and pressing the VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will return to the state it was in prior to the search. RESET Select the EXECUTE using the button to reset the AUTO menu items. : EXECUTE CANCEL The items of the AUTO menu are collectively returned to the initial setting. Note that the item “ADJUST” is not reset. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 29 Multifunctional Settings (continued) SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION BLANK START UP MyScreen MyScreen SIZE MyScreen LOCK MENU POSITION MESSAGE RESET BLACK ORIGINAL x1 TURN OFF TURN ON : SELECT Item Description BLANK Select a type of the BLANK screen using the / buttons. : MyScreen ORIGINAL BLUE WHITE BLACK The BLANK screen is the screen, which is displayed by pressing the BLANK button. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. The BLUE, the WHITE and the BLACK are the non-pattered (plain) screens in each color. memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. memo For the MyScreen, please refer to the item “MyScreen” in this table. START UP Select a type of the START UP screen using the / buttons. : MyScreen ORIGINAL TURN OFF The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. When the TURN OFF is selected, the BLUE is used. memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK after several minutes. If also the BLANK screen is the MyScreen or the ORIGINAL, it will change to the BLACK screen. memo About the MyScreen, please refer to the item “MyScreen” in this table. About the BLUE, BLACK and BLANK screens, please refer to the item “BLANK” in this table. MyScreen Pressing the (or the ENTER) button starts the MyScreen registration. Please see the flow chart on the following page. MyScreen SIZE Select the size of the MyScreen using the x1 FULL / buttons. : Select the TURN ON or the TURN OFF using the / buttons.: TURN ON TURN OFF MyScreen LOCK The TURN ON disables the operation of the item “MyScreen” of this SCREEN menu. Adjust the menu position using the / / / buttons. : Up T HEPOSITION T RUS T E DS OUR O RPROJ E CT ORL AMPSANDACCE S S ORI E S MENU Left C +E F Right Down memo To finish this operation, press the ESC button but not the button. (This table is continued to the following page.) 30 Multifunctional Settings (continued) SCREEN Menu (continued) Item Description MESSAGE RESET Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the “AUTO IN PROGRESS” for the auto adjustment. The message of the ”NO INPUT IS DETECTED” The message of the ”SYNC IS OUT OF RANGE” The message of the ”Searching …” The message of the “Detecting …” The indication of the input signal by input change. The indication of the aspect ratio by changing the aspect ratio. The indication of “FOCUS” by adjusting the focus. Select the EXECUTE using the button to reset the SCREEN menu items. : EXECUTE CANCEL The items of the SCREEN menu are collectively returned to the initial setting. How to register your picture as the MyScreen MyScreen is pointed on the SCREEN menu. Press the button The MyScreen menu appears. Do you capture the picture from the current screen? If the ESC/RESET button is pressed ... MyScreen Do you start capturing this picture? ESC :NO ENT :YES NO: Press the ESC/RESET button YES: Press the ENTER button The picture freeze and the frame for capturing appears. Move the frame to the position of the picture which you want to use, using / / / buttons, and press the ENTER button to register. Registering. It takes about 1 minute to register. MyScreen Move the capture area as you want. ESC :RETURN ENT :NEXT My Screen 45% T HE T RU S T E D OURCregistration EF ORPR J E CT ORL AMPSANDACCE S S ORI E S Just when theS picture isO completed the registered screen and the message of the right is displayed for a few seconds. If the picture registration failed, the message of the right is displayed for a few seconds. MyScreen registration is finished. A capturing error has occurred. Please try again. 31 Multifunctional Settings (continued) OPTION Menu With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION VOLUME SPEAKER IR REMOTE LAMP TIME FILTER TIME SERVICE RESET 16 TURN ON 1: 2: 3: 1234 h 4321 h : SELECT Description VOLUME Adjust the volume using the High Low / buttons. : SPEAKER Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the built-in speaker works. IR REMOTE Select a remote sensor using the / button (1), then switch it using the ENTER button (2). : (1) 1 : FRONT 2 : TOP 3 : REAR (2) (Off) (On) memo A sensor cannot be turned off when the other two are off. Always at least one sensor is on. LAMP TIME Pressing the RESET button for about 3 seconds displays the LAMP TIME menu. Select the RESET using button to reset the timer. : RESET CANCEL Selecting the RESET resets the count of the lamp timer to 0. memo Perform this function only when you have replaced the lamp. The lamp timer counts the used time of the current lamp, to display the messages about the lamp. Incorrect performing causes incorrect operation of the messages. memo About replacing the lamp, please refer to the section” Lamp”. FILTER TIME OPTION IR REMOTE 1 : FRONT 2 : TOP 3 : REAR ENT Pressing the RESET button for about 3 seconds displays the FILTER TIME menu. Select the RESET using button to reset the timer. : RESET CANCEL Selecting the RESET resets the count of the lamp timer to 0. memo Perform this function only when you have cleaned or replaced the air filter. The filter timer counts the used time of the air filter after cleaning or replacement, to display the messages about the air filter. Incorrect performing causes incorrect operation of the messages. memo About caring for the air filter, please refer to the section “Air Filter”. (This table is continued to the following page.) T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 32 Multifunctional Settings (continued) OPTION Menu (continued) Item Description Pressing the (or the ENTER) button calls the SERVICE menu. SERVICE Menu Select an item using the / buttons, and press the (or the ENTER) button to per form each function. : FANSPEED AUTO ADJUST LENS LOCK NORMAL ENABLE TURN OFF : SELECT FANSPEED Select the fan speed level using the / buttons. : HIGH NORMAL The HIGH ups rotation speeds of fans, though. Please use this function in using a projector at highlands etc. memo Note that the projector is noisier when the HIGH is selected. AUTO ADJUST Select the ENABLE or the DISABLE using the / buttons. : ENABLE DISABLE When the ENABLE is selected, detecting a signal change to a RGB signal performs the automatic adjustment of the vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE). Depending on conditions, such as input image, signal cable to the unit, environment around the unit, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and adjust manually. LENS LOCK Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF Selecting the TURN ON locks the adjustment of the zoom and the focus. SERVICE RESET SERVICE FANSPEED AUTO ADJUST LENS LOCK Select the EXECUTE using the button to reset the OPTION menu items. : EXECUTE CANCEL The items of the OPTION menu are collectively returned to the initial setting. Note that the items “VOLUME”, “LAMP TIME”, “FILTER TIME” and “SERVICE” are not reset. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 33 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes. About disposal of a lamp • This product contains a mercury lamp; do not put in trash. Dispose of in accord with environmental laws. For lamp recycling, go to www.lamprecycle.org. (in the US) For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada). For more information, call your dealer. Disconnect the plug from the power outlet • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. • If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth. • Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp. • Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury. • Use only the lamp of the specified type DT00601 . • If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to T HET RUS T E DS OURC EF ORPROJ E CT ORL AMPSANDACCE S S ORI E S burst during use. • If the indicators or a message prompts you to replace the lamp (see the section “Related Messages” and “Regarding the indicator Lamps”), replace the lamp as soon as possible. Using the lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage. 34 Lamp (continued) Replacing The Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2 Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In the case of replacement by yourself, 3 After making sure that the projector has cooled Lamp cover adequately, slide the knob of a lamp cover lock as knob shown in the Figure. Then, one side of the lamp cover is raised. Pull up the lamp cover and remove it, as shown in the Figure. 4 Unscrew the 3 screws, and slowly pull out the lamp by the handle. Be careful not to touch the inside of Screws the lamp case. 5 Insert the new lamp, and tighten the 3 screws firmly to lock it in place. 6 Interlocking the 2 tabs of the lamp cover to the projector, put the lamp cover on the projector. Then push the point of the lamp cover to fix it, as shown in the Figure. Make sure that the lamp cover does’t come up. Lamp cover PC P CO LAM Tabs Turn on the projector, and reset the lamp timer. (1) While the projector running, press the MENU button to open the menu. (2) Choose the “OPTION” on the menu using the button, then press the / button or ENTER button. (3) Choose the “LAMP TIME” using the button, then press and hold the / RESET button for 3 seconds. (4) Choose the “RESET” using the button. memo When the lamp has been replaced after the message of "THE POWER WILL TURN OFF AFTER 0hr." displayed, complete this operation within 10 minutes of T HE T RUS T E D S OUR CEisF ORPROJ E CT ORL AM PSAND ACC E S S ORI E S switching power on. memo Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions. 7 35 Air Filter WARNING • Please carefully read the “User’s Manual - Safety Guide. • Before caring, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. • Use only the air filter of the specified type NJ08081. • Do not use the projector with the air filter and filter cover removed. The use without the air filter could result in damage. CAUTION • If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. The power is automatically turned off in order to prevent the projector from overheating internally. Caring For The Air Filter The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible. If the soiling will not come off the air filter, or it becomes damaged, then it needs to be replaced. Please replace the air filter as soon as possible. memo When you replace the lamp, please replace also the air filter. 1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2 After making sure that the projector has cooled adequately, remove the filter cover and air filter. 3 Apply a vacuum cleaner to the top of the filter cover and the air filter to clean. If the soiling will not come off the air filter, or it becomes damaged, it needs to be replaced. If the air filter needs to be replaced, contact your dealer to prepare a new air filter. Tell the dealer your air filter type. 4 Insert the cleaned air filter or a new air filter, and replace the filter cover. Hold the release buttons of the filter cover while pulling down it. Hold the release button of the air filter while pulling out it. Turn on the projector power, and reset the filter timer. (1) While the projector running, press the MENU button to open the menu. (2) Choose the “OPTION” on the menu using the / button, then press the button or ENTER button. (3) Choose theS “FILTER TIME” using the then T HE T R US T E D OURCE F OR PRO J E CT Rbutton, L AMP SANDACCE S S ORI E S /O press and hold the RESET button for 3 seconds. (4) Choose the “RESET” using the button. memo Incorrectly resetting of the filter timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions. 5 36 Other Care WARNING • Please carefully read the “User’s Manual - Safety Guide”. • Before caring, make sure the power switch is off and the power cable is not plugged in. • Be cautious of high temperature. Do not touch about the lens and ventilation openings during use or immediately after use prevent a burn. • Never try to care for the inside of the unit yourself. Doing so is dangerous. CAUTION • Incorrect care could have adverse influence such as discoloration, peeling paint, etc. • Do not use cleaner or chemicals other than those listed below, including benzene and paint thinner. • Do not use aerosols or sprays. • Do not polish or wipe with hard objects. Caring For The Inside Of The Projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every year. Caring For The Lens 1 Turn off the projector, and unplug the power cord. 2 Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring For The Cabinet And Remote Control 1 Turn off the projector, and unplug the power cord. 2 Wipe lightly with gauze or a soft cloth. memo If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 37 Troubleshooting Related Messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company. memo Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. THE POWER WILL TURN OFF AFTER ** hr. CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. THE POWER WILL TURN OFF AFTER 0 hr. Description The time the lamp timer has counted is approaching 2000 hours. Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer. The time the lamp timer has counted is approaching 2000 hours, so a lamp change within ** hours is recommended. When lamp usage reaches 2000 hours, the power will automatically be turned off. Please change the lamp by referring to the section “Lamp”. After you have changed the lamp, please be sure to reset the lamp timer. As the time the lamp timer has counted has reached 2000 hours, the power will soon be automatically turned off. Please immediately turn the power off, and change the lamp by referring to the section “Lamp”. After changing the lamp, please be sure to reset the lamp timer. (This table is continued to the following page.) NOTE • A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic shut-down function, such that the power will automatically be turned off when lamp usage time has reached 2000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; lamp may thus toO light even toP the functioning of the T HET R US T E DaS OUR CEF ORfail PR J E CT ORprior L AM SA NDACCE S S ORI E S automatic shut-down function of this projector. 38 Troubleshooting (continued) Related Messages (continued) Message Description CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER. The time the filter timer has counted has reached 100 hours. Please clear or change the air filter by referring to the section “Air Filter”. After caring for the air filter, please be sure to reset the filter timer. The internal portion temperature is rising. CHECK THE AIR FLOW NO INPUT IS DETECTED ON *** SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz Please turn the power OFF, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? There is no input signal. Please confirm the signal input connection, and the status of the signal source. The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit. Please confirm the specs for this unit or the signal source specs. T HET RUS T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S 39 Troubleshooting (continued) Regarding The Indicator Lamps Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company. NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “○” (OFF) side of the main power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. STANDBY/ON LAMP indicator indicator TEMP indicator Description Lighting in Orange Turned off Turned off The projector is in a standby state. Blinking in Green Turned off Turned off The projector is warming up. Lighting in Green Turned off Turned off The projector is in an on state. Blinking in Orange Turned off Turned off The projector is cooling down. Blinking in Red (discretionary) (discretionary) Please refer to the section “Power On/Off”. Please wait. Ordinary operations may be performed. Please wait. The projector is cooling down. A certain error has been detected. Please wait until the STANDBY/ON indicator finishes blink, and then perform the proper response measure using the item descriptions below as reference. The lamp does not light, and there is a possibility that interior portion has become heated. Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and Lighting Lighting Turned then turn the power on again. in Red in Red off • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? T HET RUS T E DS OURCEF OR PRO J E CT ORL A MPSAN DACC E S S ORI E S If the same indication is displayed after the treatment, please change the lamp by referring to the section “Lamp”. (This table is continued to the following page.) 40 Troubleshooting (continued) Regarding The Indicator Lamps (continued) STANDBY/ON LAMP indicator indicator TEMP indicator Description Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Lighting in Red Blinking in Red Turned off Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. If the same indication is displayed after the treatment, please contact your dealer or service company. The cooling fan is not operating. Lighting in Red Turned off Blinking in Red Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation that no foreign matter has become caught in the fan, etc., and then turn the power on again. If the same indication is displayed after the treatment, please contact your dealer or service company. There is a possibility that the interior portion has become heated. Lighting in Red Lighting in Green Turned off Lighting in Red Alternative Blinking in Red Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? If the same indication is displayed after the treatment, please change the lamp by referring to the section “Lamp”. There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (0°C to 35°C). After the treatment, resent the power to ON. It is time to clean the air filter, or there is no air filter. Lighting in Green Simultaneous Blinking in Red Please immediately turn the power OFF, and clean or change the air filter by referring to the section “Air Filter”. After cleaning orE changed the airP filter, sure to the T HET RUS T E DS OURCEF OR PROJ CT ORL AM SAplease NDAbe CC E S S Oreset RI E S filter timer. After the treatment, resent the power to ON. 41 Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects WARNING • Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet After making sure that the smoke or odor has stopped, contact your dealer or service company. Before requesting repair, please check in accordance with the following chart. If the situation cannot be corrected, please contact your dealer or service company. NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect. Phenomenon Power does not come on. Neither sounds nor pictures are outputted. Cases not involving a machine defect Reference pages The electrical power cord is not plugged in. Correctly connect the power cord. 11 The power switch is not set to the on position. Set the power switch to [ | ] (On). 14 The main power source has been interrupted during operation such as by a power outage (blackout), etc. Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufficiently cooled down, please turn the power on again. 14 Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. 34, 35 The signal cables are not correctly connected. Correctly connect the connection cables. 8~11 Signal source does not correctly work. Correctly set up the signal source device by referring to the manual of the source device. The input changeover settings are mismatched. - 15 the input signal, and correct theL settings. T HET RUS T E DSelect S OUR CE F O RPR OJ E CT OR AMPSANDACCE S S ORI E S (This table is continued to the following page.) 42 Troubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects (continued) Phenomenon Pictures are displayed, but no sounds are heard. Sounds are heard, but no pictures are displayed. Colors have a faded- out appearance, or Color tone is poor. Pictures appear dark. Pictures appear blurry. Cases not involving a machine defect Reference pages The signal cables are not correctly connected. Correctly connect the connection cables. 8~11 The volume is adjusted to an extremely low level. Adjust the VOLUME to a higher level. 18, 32 The sound is muted. Press the MUTE button to restore the sound. 18 The audio input is not correctly selected when the child window is displayed. Correctly select the audio input. 20 The lens cap is attached. Remove the lens cap. 4, 14 The signal cables are not correctly connected. Correctly connect the connection cables. 8~11 The brightness is adjusted to an extremely low level. Adjust the BRIGHT to a higher level using the menu function. 22 The screen is blanked. Press the BLANK button to return to the input signal screen. 18 Color settings are not correctly adjusted. Perform picture adjustments by changing the COLOR BAL R, COLOR BAL G, COLOR BAL B, COLOR and/or TINT settings, using the menu functions. 23 The brightness and/or contrast are adjusted to an extremely low level. Adjust the BRIGHT and/or CONTRAST settings to a higher level using the menu function. 22 The WHISPER function is working. Select the NORMAL to the item WHISPER in the MAIN menu. 22 The lamp is approaching the end of its product lifetime. Replace the lamp. 34, 35, 38 Either the focus and/or horizontal phase settings are not properly. Adjust the focus using the focus buttons, and/or H PHASE using the menu function. 15, 25 The lens is dirty or misty. Clean the lens by referring to the section “Caring For The Lens”. 37 Input signal dial is set between the click points. T HET RUS T E DThe S OINPUT URCE F ORPROJ E CT ORL AMPSANDACCE S S ORI E S changes with no 15 Turn the INPUT dial and set it at a click point. operation. 43 Warranty And After-Service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Specifications NOTE • This specifications are subject to change without notice. Item Product name Liquid crystal panel Specification Liquid crystal projector Panel size 2.5 cm (0.99 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens F=1.7 ~ 2.4 f=30.5 ~ 45.8 mm Lamp 310W UHB Speaker 1.0W + 1.0W (Stereo) Power supply AC100 ~ 120V, 5.2A AC220 ~ 240V, 2.2A Power consumption 470W Temperature range 0 ~ 35°C (Operating) Size 420 (W) x 150 (H) x 318 (D) mm (Not including protruding parts) • Please refer to the figure of the section “TECHNICAL” of the end of this manual. Weight (mass) 6.9 kg RGB input ports RGB BNC (R, G, B, H, V) Video input ports VIDEO IN S-VIDEO COMPONENT (CR/PR, CB/PB, Y) Ports Audio input ports AUDIO IN 1 AUDIO IN 2 AUDIO IN R/L RGB output port RGB OUT Audio output port AUDIO OUT Control port CONTROL Other ports REMOTE CONTROL Lamp DT00601 T HET RU S T E DS OURCEF ORPROJ E CT ORL AMPSANDACCE S S ORI E S Optional Parts 44 Air filter NJ08081 Others • Please consult your dealer. Disclaimer This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim of copyright and all copyrights remain the property of their respective owners. About FixYourDLP.com FixYourDLP.com (http://www.fixyourdlp.com) is the World’s #1 resource for media product news, reviews, do-it-yourself guides, and manuals. Informational Blog: http://www.fixyourdlp.com Video Guides: http://www.fixyourdlp.com/guides User Forums: http://www.fixyourdlp.com/forum FixYourDLP’s Fight Against Counterfeit Lamps: http://www.fixyourdlp.com/counterfeits Sponsors: RecycleYourLamp.org – Free lamp recycling services for used lamps: http://www.recycleyourlamp.org Lamp Research - The trusted 3rd party lamp research company: http://www.lampresearch.com Discount-Merchant.com – The worlds largest lamp distributor: http://www.discount-merchant.com Sponsored by DM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement