advertisement
Mini Video Transmitter and Receiver with (AGC)
COMPAK11M
INCLUDED HARDENED 1
The ComNet ™ FVT11M video mini-transmitter and FVR11M video mini-receiver supports transmission and reception of a fixed video signal using AM modulation on one multimode fiber optic cable. The FVT11M video transmitter is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. The FVR11M utilizes Automatic
Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.
FEATURES
› AM Video Transmitter and Receiver
› NTSC, PAL, SECAM compatible
› The receiver utilizes Automatic Gain Control (AGC)
› Full color compatibility
› No in-field electrical or optical adjustments required
› Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events.
› Bi-Color (Red/Green) Video Present indicating LEDs
› Lifetime Warranty
APPLICATIONS
› CCTV (Fixed Video)
* Small Form-Factor Pluggable Module. Sold separately.
LIFETIME WARRANTY
WWW.COMNET.NET
TECH SUPPORT: 1.888.678.9427
COMPAK11M
Mini Video Transmitter and Receiver with (AGC)
SPECIFICATIONS
Video
Video Input TX
Video Output RX
Bandwidth
1 volt pk-pk (75 ohms)
1 volt pk-pk (AGC controlled)
5 Hz - 10 MHz¹
Differential Gain
Differential Phase
<5%
<5˚
<1%
Signal-to-Noise Ratio (SNR) 60 dB
Max. RG-59 COAX Distance 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Wavelength 850 nm, Multimode
Number Of Fibers 1
Connectors
Optical
Power
Video
Indicating LEDs
ST
Terminal Block
BNC (Gold Plated Center-Pin)
- Video Present
Power
Operating Voltage Range 8 to 15 VDC
FVT11M Power Consumption 2 W
FVR11M Power Consumption 1 W
Electrical & Mechanical
Max. RG59 Cable Length 750 ft.
Circuit Board
Size
Meets IPC Standard
FVT11M 2.3 × 1.6 × 1.1 in. (5.7 × 4.1 × 2.8 cm)
Shipping Weight
FVR11M 4.0 × 3.7 × 1.0 in (10.4 × 9.5 × 2.7 cm)
<2 lb./0.9 kg
Environmental hours
Operating Temp -40˚ C to +75˚ C
Storage Temp
Relative Humidity
-40˚ C to +85˚ C
0% to 95% (non-condensing)²
[1] At 6 dB Attenuation
[2] May be extended to condensation conditions by adding suffix ‘/C’ to model number for conformal coating.
INCLUDED IN KIT
Part Number
FVT11M
FVR11M
Accessories
Options
Wavelength
Mini Video Transmitter
Connector
ST
Fibers
Required
1
Fiber
Multimode
Optical Power
Budget
14 dB
AGC Mini Video Receiver ST
DC Plug in Power Supply, 90-264VAC, 50/60Hz (Included)
1 Multimode 14 dB
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
[3] Distance may be limited by optical dispersion.
Max. Distance³
4 km (2.5 mi)
4 km (2.5 mi)
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
TYPICAL APPLICATION
V
FVT11M FVR11M
V
LEGEND
VIDEO (COAX)
OPTICAL FIBER
1 Fiber
3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300
| F: 203.796.5303
| TECH SUPPORT: 1.888.678.9427
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
08 Apr 2014
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement