Whirlpool AWO/D 43130 Washing Machine User Manual

GB
PROGRAMME CHART
A. “Door open” indication
C
A
D
B
J
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
F. “Start/Pause” button
G. “Variable spin” button
H.Programme sequence indicator
and Start delay indication
I. “Reset” button
J. “Start delay” button
H
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage and
react appropriately, e.g.:
I
E
Care
Labels
Max.
Load
Type of wash / Notes
kg
- respect the manufacturer's recommendations on the care label
Cotton
95 °C
5.0
Cotton
40 - 60 °C
5.0
SuperEco
60 °C
5.0
Synthetics
30 - 40 - 60 °C
2.5
Delicates
30 - 40 °C
F
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or
stains, you can add an oxygenbased bleach additive which can be used at 95°C. This
programme eliminates bacteria, ensuring sanitization of your laundry.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
Heavily soiled and robust laundry made of cotton, synthetics and their blends.
Economical energy consumption by prolonged wash duration - ideal to be run overnight to
profit from more favourable energy rates. Avoid noise of spinning at night by setting the
spin speed to “0” and start spin programme in the morning, or by defining programme
start with “Start delay” accordingly. - For garments with a high share of synthetic fibres,
we recommend to use a laundry net.
Acustic noise level :
Washing - Spinning - 1400 rpm
- 1200 rpm
- 1000 rpm
G
Detergents and Additives
Prewash
Main
Wash
Softener
59 dB(A) / 1 pW
77 dB(A) / 1 pW
75 dB(A) / 1 pW
74 dB(A) / 1 pW
Special options
Start
delay
Rapid
Prewash
Intensive
rinse
Rinse
hold
Variable
spin
Max
Spin
Speed
rpm
i
Yes
i
i
–
i
i
i
i
Max.
i
Yes
i
i
i
i
i
i
i
Max.
–
Yes
i
i
–
–
i
i
i
Max.
Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose
etc.) or their blends with cotton.
i
Yes
i
i
i
i
i
i
i
Max.
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
i
Yes
i
i
–
i
–
i
i
1000 1)
Daily load
40 °C
3.0
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and
their blends. Effective one-hour programme. Make sure to wash only similar colours
together in one wash load.
–
Yes
i
i
–
–
i
i
i
Max.
Quick wash
30 °C
3.0
Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.
Brief programme to refresh your laundry.
–
Yes
i
i
–
–
–
i
i
Max.
1.0
Only woollens, labelled with the Woolmark and identified as machine washable.
–
Yes
i
i
–
–
–
i
i
1000 1)
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
Care programme with a very gentle spin.
–
Yes
i
i
–
–
–
i
i
400 1)
5.0
Same as the last rinse and the final spin in the “Cotton” programme.
–
–
i
i
–
–
i
i
i
Max.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.
–
–
–
i
–
–
–
–
i
Max.
Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.
–
–
–
i
–
–
–
–
–
–
Cold
Wool
- 40 °C
Handwash
30 - 40 °C
Rinse & Spin
–
Spin
–
5.0
Drain
–
–
i : option / Yes : dosing required
1) For improved garment care spin speed
is restricted in these programmes.
Downloaded From WashingMachine-Manual.com Manuals
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01260
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
without “Rapid”
Cotton
Cotton **
Cotton **
Cotton
Cotton **
SuperEco
Synthetics
Synthetics
Delicates
Daily load
Quick wash
Wool
Handwash
Handwash
95
60
60
40
40
60
60
40
30
40
30
40
40
30
5.0
5.0
2.5
5.0
2.5
5.0
2.5
2.5
1.5
3.0
3.0
1.0
1.0
1.0
53*
44
32
49
32
47
50*
45
50
45
40
55
45
45
1.70
0.75
0.65
0.60
0.55
0,60
0.70
0.50
0.50
0.45
0.40
0.60
0.60
0.50
Approx. programme duration
(hours : minutes)
without “Rapid”
with “Rapid”
2:00
4:00
2:20
2:45
2:30
4:00
1:30
1:15
0:45
1:00
0:30
0:45
0:40
0:36
2:30
***
1:45
***
1:09
0:54
-
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin
speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that
time (see also “Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference programmes for Energy Label.
*** Automatic adaptation of programme duration after detection of wash load
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
• Turn the programme selector to the desired programme and temperature.
• The indication lamp next to “Start/Pause”
button blinks.
• The indication lamp of the predefined spin speed
lights up.
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective
indication lamp lights up.
If the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly
soiled laundry.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt). Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “Start/Pause” button flashes.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”button.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “Start/Pause” button.
The indication over to the “Start Delay” button
lights up and goes off when the programme starts.
• Once having pressed the “Start/Pause” button,
the countdown of the time delay begins. When
the programme starts, the start delay indicator
light goes off and is replaced by the programme
sequence indication.
• After the “Start/Pause” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start Delay”
button.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position or press the “Reset” button.
..after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 seconds the start delay indicator light goes out.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
When the programme phase is finished, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component.
“Water tap closed”
The washing machine has no or insufficient water
supply; the water tap might be closed or the water
inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may
be kinked or the filter must be cleaned (see “Cleaning
the filter” in your Instructions for Use).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the
end.
• Press and hold the “Reset” button for a few
seconds. Any existing water is drained out. It may last
some time until the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
Downloaded From WashingMachine-Manual.com Manuals
5019 301 01260