advertisement
HDMI 1 In x 16 Out 4Kx2K Splitter
# 15215
Operation Manual
Introduction
Applications
Features
This high performance 1 by 16 HDMI splitter distributes one HDMI input to up to sixteen simultaneous HDMI outputs and supports 4K×2K, 3D, 12-bit
Deep Color as well as High Definition Lossless Audio. With its 3Gbps bandwidth it supports the latest HDMI standards so you can be sure of superior HDMI distribution
•
•
•
•
Simultaneously display one HDMI source on 16 displays
Showroom display
University lecture hall display
Retail sales display
• HDMI and DVI compatible
•
• Fully HDCP compliant
•
•
Supports 3D
Supports HDTV resolutions up to 4K×2K@30 Hz
Supports PC Resolutions of VGA to WUXGA
•
•
•
Supports 1080p@60 Hz, Deep Color 12-bit
Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
Supports HDMI cable distances of up to 10m input and 10m output
(8/12-bit)
Note: When displaying a 3D signal with a higher bandwidth than
225 MHz or a 4K×2K resolution source, a High Speed HDMI cable is required.
System
Requirements
•
•
HDMI equipped source device such as a DVD/Blu-ray player with
HDMI or DVI to HDMI cable
HDMI equipped displays (HDTVs or projectors) or AV Receivers with
HDMI cables
Operation Front Panel
Controls and
Functions
1. POWER LED: The power LED will illuminate when the unit is powered.
2. SYNC LED: The LED will illuminate when the HDMI source signal is connected to the input port.
Rear Panel
1. EDID STD/TV: The default factory setting is TV, when in this mode, the unit will detect the first HDMI output device's EDID settings and record them in the unit's memory. If there are any audio or video issues then switch the unit to STD
(Standard) mode and power cycle it, the unit will be configured as standard stereo
(PCM) Audio and initiate a search for a common compatible video resolution.
2. SERVICE: Manufacturer use only.
3. HDMI INPUT: Connect the input port to the HDMI or DVI output of your source equipment such as DVD player or set-top box.
4. HDMI OUTPUTS (1~16): Connect each of the output ports to an HDMI display for simultaneous HDMI distribution.
5. DC 5V: Connect the 5V DC power supply into the splitter and Plug the adaptor to AC wall outlet.
Specifications
Video Bandwidth
Input Port
Output Ports
Output Resolutions
ESD Protection
340MHz/10.2Gbps
1×HDMI (Female connector), 1×USB
(Manufacturer use only)
16×HDMI (Female connector)
480i~1080p@50/60, 1080p@24/50/60,
VGA~UXGA, Ultra HD (4K×2K@30)
Human body model:
436 mm (W)×26 mm (D)×48 mm (H)
1664 g
±8kV (air-gap discharge)
±4kV (contact discharge)
Dimensions
Weight
Chassis Material
Color
Metal
Black
Operating Temperature 0 ̊C~40 ̊C/32 ̊F~104 ̊F
Storage Temperature
Relative Humidity
Power Consumption
−20 ̊C~60 ̊C/−4 ̊F~140 ̊F
20~90% RH (non-condensing)
15.8 W
Connection
Diagram
advertisement