Compaq | BL10e - HP ProLiant - 512 MB RAM | User manual | DA - 11057 - Worldwide - Product documentation
Add to my manuals23 Pages
advertisement
QuickSpecs
Overview
HP ProLiant BL10e e-Class Server Blade
ProLiant BL e-Class Server Blade Enclosure
(shown with 20 ProLiant BL10e server blades)
ProLiant BL10e Server Blade
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 1
QuickSpecs
Overview
HP ProLiant BL10e e-Class Server Blade
What's New
900-MHz Ultra-Low Voltage Intel® Pentium® lll processor with 512K cache
40-GB Ultra ATA/100 5,400 rpm non-hot-plug hard drive, 2.5"
Free firmware upgrade for the C-GbE Interconnect Switch providing enhanced management and deployment functionality (Available in
February, 2003)
ProLiant BL10e Server Blade includes:
One Ultra-Low Voltage ULV Intel Pentium lll processor with 512K cache (100-MHz front side bus)
ServerWorks LELP 3.0 chipset
512-MB PC133-MHz Registered ECC SDRAM DIMM Memory expandable to 1024MB (2 DIMM slots)
Two Compaq NC3163 Fast Ethernet NICs Embedded 10/100 WOL (Wake On LAN) enabled with PXE (Pre-boot execution Environment)
One 40-GB Ultra ATA/100 hard drive
Server blades protected by HP Services, including a limited one year parts warranty with optional service uplifts available
ProLiant BL e-Class Server Blade Enclosure includes:
3U high rack-mountable chassis with 20 server blade bays
Can be purchased with 20 licenses for new ProLiant Essentials Rapid Deployment Pack at 50% of standard license list price!
Dual, 1+ 1 redundant hot-plug power supplies
Four, 2+ 2 redundant hot-plug fans
Three available interconnect configurations: C-GbE Interconnect Switch; RJ-45 Patch Panel; and RJ-21 Patch Panel
Server blade enclosure protected by Compaq Services, including a limited three year warranty with optional service uplifts available
ProLiant BL e-Class Integrated Administrator features:
Acts as a combination terminal server and remote power controller, enabling out-of-band, secure, serial console connections to all server blades and the optional interconnect switch
Enclosure, interconnect switch and server blade health monitoring and alerts
Command-line and browser-based management interfaces, including access permissions, for the server blades and the enclosure
Provides access to the interconnect optional switch management interfaces
Server blade, interconnect switch and system operation are independent of the Integrated Administrator
SNMP, web and scriptable command-line interfaces
PLUS
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 2
QuickSpecs
Overview
HP ProLiant BL10e e-Class Server Blade
PLUS or or a. C-GbE Interconnect Switch
Configuration Steps
b. RJ-45 Patch Panel
For a complete configuration of the HP ProLiant BL e-Class system, do the following: c. RJ-21 Patch Panel
1.
Select ProLiant BL10e server blades sold [in a single-pack or 10-pack]
2.
PLUS
Select Server Blade Enclosures (each can hold up to 20 ProLiant BL10e server blades). The enclosure can be purchased bundled with 20 licenses for ProLiant Essentials Rapid Deployment Pack at 50% of the standard license price.
( NOTE: Rapid Deployment Pack is optimized for configuring and deploying ProLiant BL10e server blades and enable unique features such as blade "rip and replace" for effortless server redeployment.
)
3.
PLUS
Select one of the three Interconnect Tray options for each server blade enclosure
( NOTE: Each interconnect tray includes an Integrated Administrator module.
): a. C-GbE Interconnect Switch (with 4 10/100/1000T Gigabit Ethernet
RJ-45 uplinks for up to 40-to-1 network cable reduction!)
OR b. RJ-45 Patch Panel (with 40 RJ-45 connectors)
OR c. RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)
( NOTE: If suitable for your environment, select also the RJ-21 to RJ-45 Cable Option kit.
)
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 3
QuickSpecs
Standard Features
HP ProLiant BL10e e-Class Server Blade
HP ProLiant BL10e Server Blade
Processor
One Ultra-Low Voltage Intel Pentium III 900-MHz processor; 100-MHz front-side bus
Cache Memory
Chipset
512K Level-2 on-die Cache
Memory
ServerWorks LELP 3.0 chipset
NOTE: For more information regarding ServerWorks, please see the following URL: http://www.serverworks.com/products/overview.html
.
Standard
Maximum
512-MB PC133-MHz Registered ECC SDRAM DIMM Memory (1x512 MB)
1024 MB (2 DIMM slots total)
Network Controller
Two Compaq NC3163 Fast Ethernet NICs Embedded 10/100 WOL (Wake On LAN) enabled with PXE
Hard Drive One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug 2.5" hard drive
Internal Storage
Warranty
1 year on parts, 9x5 NBD. Care Pack warranty upgrades available to add labor, on-site service, faster response times, and longer terms to the standard server blade warranty. PXE
Form Factor
Form Factor
Server blades plug vertically into HP ProLiant BL e-Class Server Blade Enclosure
To view the Product Demo, please see the following URL, then click on
"PRODUCT DEMO": http://www5.compaq.com/products/servers/proliant-bl/e-class/index.html
.
HP ProLiant BL10e Server Blade
HP ProLiant BL e-Class
Server Blade Enclosure
5.25 inch Height (3U), 17.5 inch Width, 28.35 inch Depth
Bays for up to 20 ProLiant BL10e server blades
Rack Capability
Mounts in HP, Compaq-branded, third-party, and Telco racks. Rack mounting hardware for HP, Compaq-branded and third-party racks ships standard with each server blade enclosure. Telco rack-mounting hardware is a separately available option kit.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 4
QuickSpecs
Standard Features
Server Blade
Enclosure includes
HP ProLiant BL10e e-Class Server Blade
Rear bay for 1 of 3 Interconnect Tray configurations for network cable management (see below).
Two (2) Diagnostic Adapters for connecting keyboard, video, mouse and other devices locally to individual server blades
ProLiant Essentials Foundation Pack for ProLiant BL Servers, includes the Insight Manager 7 and Management
Agents CD and ProLiant Essentials Rapid Deployment Pack CD (trial version – 7-days, 10 nodes).
( NOTE: The ProLiant BL e-Class server blade enclosure can also be purchased bundled with 20 licenses for Rapid
Deployment Pack at 50% of the standard license price.
)
Four (2+ 2 redundant) hot- plug fans
Dual (1+ 1 redundant) hot- plug power supplies (600 watts each), power cords
Server blade blanks (to fill 19 of the 20 server blade bays)
Rack mounting hardware for HP, Compaq-branded and third-party racks
Null-modem cable for serial connection to the Integrated Administrator serial "Console" connector
HP Documentation CD
Warranty
3 years on parts, labor and on-site service. Care Pack warranty upgrades available to add faster response times to the standard warranty.
HP ProLiant BL e-Class Interconnect Trays
NOTE: Each interconnect tray includes the Integrated Administrator module.
Warranty
Please see the following (3) interconnect tray configurations for accessing server blade network connections:
ProLiant BL e-Class C-GbE Interconnect Switch (with 4 Gigabit Ethernet uplinks for up to 40-to-1 network cable reduction!)
NOTE: See details below.
RJ-45 Patch Panel (with 40 RJ-45 connectors)
RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)
NOTE: See "Other Options" below for RJ-21 to RJ-45 Cable option kit.
3 years on parts, labor and on-site service. Care Pack warranty upgrades available to add faster response times to the standard warranty.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 5
QuickSpecs
Standard Features
HP ProLiant BL10e e-Class Server Blade
HP ProLiant BL e-Class Integrated Administrator Features
Out-of-band local console and remote network access to the server blade enclosure and all 20 server blades via (one) RJ-45 10/100T Fast
Ethernet and (one) RS-232 management connectors
Provides local and remote access to the ProLiant BL e-Class C-GbE Interconnect Switch command console and browser-based management interfaces
SNMP, Web (via HTTPS) and command-line interfaces (via Console connector, Telnet and Secure Shell)
Remotely power on/off/reboot server blades and enclosures
Remotely toggle on/off unit identification LEDs (UID) of server blades and enclosures
Monitors and controls the enclosure fans, temperature sensors, power supplies, interconnect switch and server blade status
Connect to each server blade's serial text console for enabling full control over server blade's Power-On Self Test (POST) and boot process, including the ROM-Based Setup Utility (RBSU).
NOTE: For ProLiant BL10e server blades running Windows® 2000 Server, there is now available a Serial Console for Windows utility that provides serial-based administrative functionality using the Integrated Administrator remote console feature. For more information and to download the Serial Console for Windows utility, go to the following page: http://www.compaq.com/support/files/server/us/locate/20_2611.html
.
User administration for up to 25 users. Server blade bay privileges can be set on a per-user basis
Virtual NMI button generates non-maskable interrupt for crash debug and analysis
More than 100 scriptable commands enable automated management
Selective enabling of all protocols, such as Telnet
Logging of operating system console, server blade and enclosure hardware events, user actions and invalid login attempts
Emergency server blade enclosure shutdown caused by a critical temperature
Enclosure Link (2) connectors reserved for future use.
CAUTION: The enclosure link (RJ-45) connectors on the interconnect tray are not to be used. Connecting an external device to these enclosure link (RJ-45) connecters may damage your external device.
For more information on the ProLiant BL e-Class Integrated Administrator, please visit the Web site at: http://www.compaq.com/products/servers/proliant-bl/e-class/integrated-admin.html
.
HP ProLiant BL e-Class C-GbE Interconnect Switch Features
Provides up to a 40-to-1 reduction in network cables for each server blade enclosure using a pair of non-blocking layer 2 switch modules
Four RJ-45 10/100/1000T Gigabit Ethernet uplinks
Forty 10/100T Ethernet ports dedicated to server blade-to-interconnect switch network communications
Communicate with all 40 server blade network controllers through any one uplink connector and the management connector
Spanning tree protocol for loop-free path redundancy
Browser, scriptable CLI, and console-based interfaces for local and remote interconnect switch management
Manage entire interconnect switch through the Integrated Administrator connectors or any uplink connector
Telnet, RMON and SNMP support; SNMP-based scripting utility with example scripts
64 Port-based IEEE 802.1Q tagged VLANs per switch processor module
IGMP (internet group management protocol) multicasting and quality of service (QoS) packet prioritization
TFTP server support for rapid deployment of multiple interconnect switches and to provide backup and restore capabilities
Industry-standard design compatible with industry-standard network components from leading network manufacturers
Fully pre-configured for rapid deployment and immediate operation in ProLiant BL e-Class enclosure
For more information on the ProLiant BL e-Class C-GbE Interconnect Switch, please visit the Web site at: http://www.compaq.com/products/servers/proliant-bl/e-class/interconnect-switch.html
.
Other Options
RJ-21 to RJ-45 Cable option kit; contains four (4) 10 foot RJ-21 to RJ-45 cables (for use with the RJ-21 Patch Panel) interconnect tray
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 6
QuickSpecs
Standard Features
HP ProLiant BL10e e-Class Server Blade
Diagnostic Adapter Interfaces
NOTE: Two Diagnostic Adapters are included with every ProLiant BL e-Class Server Blade Enclosure.
ProLiant BL10e server blade LEDs and buttons
PS/2 Mouse
PS/2 Keyboard
Video
Serial
USB (2)
NOTE: Please see the following URL for additional information regarding USB support: http://www.compaq.com/products/servers/platforms/usb-support.html
.
NOTE: Server blades also support USB keyboard and USB mouse attached via the Diagnostic Adapter. The following
USB devices have been tested for use with the ProLiant BL10e and the Diagnostic Adapter:
USB Easy Access Keyboard (Carbonite/Silver) (DC168B#)
USB Optical Scroll Mouse (Carbonite) (DD441B)
USB Floppy (DC141B)
Teac USB CD-ROM (TEAC PN CD-210)
NOTE: The TEAC USB CD ROM Drive must be purchased directly from TEAC or a TEAC reseller.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 7
QuickSpecs
Standard Features
ProLiant Essentials
Foundation Pack
Software
HP ProLiant BL10e e-Class Server Blade
Insight Manager 7
Management Agents
Optional ProLiant Essentials
Value Packs
Insight Manager 7 helps maximize system uptime and performance and reduces the cost of maintaining the IT infrastructure by providing proactive notification of problems before those problems result in costly downtime and reduced productivity. Insight
Manager 7 is easy to set up and provides rapid access to detailed fault and performance information gathered by the Management Agents. One-click-access to the Remote Insight Lights Out Edition II board allows systems administrators to take full graphical control of ProLiant servers in remote locations or lights-out data centers.
Finally, Insight Manager 7 in concert with the Version Control Agents and Version
Control Repository Manager enables systems administrators to version manage and update system software across groups of ProLiant Servers.
http://www.compaq.com/products/servers/management/cim7-description.html
The Management Agents form the foundation for HP's Intelligent Manageability strategy. They provide direct, browser-based access to in-depth instrumentation built into HP servers, workstations, desktops, and portables, and send alerts to Insight
Manager 7 and other enterprise management applications in case of subsystem or environmental failures. For additional information about the Management Agents and other management products from HP, please visit the management Web site at http://www.hp.com/servers/manage .
Optional software offerings that selectively extend the functionality of an Adaptive
Infrastructure to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server deployment and provisioning, enabling companies to quickly and easily adapt to changing business demands.
Workload Management Pack – provides easier management of complex environments, improving overall server utilization and enabling Windows 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server.
Optional ProLiant BL e-Class
Interconnect Switch
Management System and
Utilities
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials .
Full featured web-based interface, menu-driven console interface, SNMP-based scripting utility and example scripts, SNMP and RMON MIBs, and TFTP server utilities for management of interconnect switch (included with the ProLiant BL e-Class C-GbE
Interconnect Switch interconnect tray option).
For more information on the ProLiant BL e-Class C-GbE
Interconnect Switch, please visit the Web site at: http://www.compaq.com/products/servers/proliant-bl/e-class/interconnectswitch.html
.
Industry Standard
Compliance
ACPI 1.0b compliant
SDG 3.0 compliant
Microsoft Logocertifications
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, and Ethernet MIB (RFC1643) (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option)
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.3ac and 802.1Q, IEEE 802.1Q, and IEEE
802.3x (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option)
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 (ProLiant BL e-Class C-GbE Interconnect
Switch interconnect tray option)
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 8
QuickSpecs
Standard Features
Manageability
HP ProLiant BL10e e-Class Server Blade
Insight Manager 7
ROM Based Setup Utility (RBSU)
Automatic Server Recovery (ASR-2)
Enclosure Self Recovery (ESR)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Blade and Enclosure Health Logs
Redundant Power Supply Utility
Power Down Utility
Pre-Failure Warranty (covers processors, hard drives and memory)
HP Interconnect Switch Management System and Utilities (included with the ProLiant BL e-Class C-GbE Interconnect
Switch interconnect tray option)
Availability Redundant Hot-Plug Power Supplies (ProLiant BL e-Class Server Blade Enclosure)
Redundant Hot-Plug Fans (ProLiant BL e-Class Server Blade Enclosure)
ECC Memory (ProLiant BL10e Server Blade)
Redundant ROM (ProLiant BL10e Server Blade)
Dual network communication paths to each server blade using redundant, non-blocking layer 2 switch modules with redundant inter-module communication links (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option
Two redundant uplink ports per each interconnect switch module (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option
Spanning tree protocol for loop-free path redundancy (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option
Security
OS Support
Power-on password
Administrator's password
Secure Shell (SSH) access through the Integrated Administrator serial console
Multilevel user names and passwords with configurable time out period setting, up to 64 IEEE 802.1Q tagged VLANs per interconnect switch module, and IP address restriction (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option
Microsoft® Windows 2000 Server
RedHat Linux
SuSE Linux
Microsoft Windows Server 2003 (when available)
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at: ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf
.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 9
QuickSpecs
Standard Features
Rack Airflow
Requirements
HP ProLiant BL10e e-Class Server Blade
Rack 9000 and 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The Compaq 9000 and 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or greater in Compaq Rack 7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the new processor technology requires the installation of Compaq's High Airflow Rack Door Inserts (327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced airflow for maximum cooling.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: Please consult the Setup & Installation Guide for the server for additional details.
Service and Support HP Services provides a wide range of service offerings, including a three-year, limited warranty on the ProLiant BL e-Class server blade enclosure and interconnect trays and a one-year, limited warranty on the ProLiant BL10e server blade. Warranties are fully supported by a worldwide network of resellers and service providers. HP technical assistance is available 7x24, toll free in the United States and Canada. Telephone support services may be covered under warranty or available for an additional fee.
NOTE: Server Blade Limited Warranty includes 1 year Parts.
NOTE: ProLiant BL e-Class Server Blade Enclosure & Interconnect Trays Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
A full range of HP Care Pack packaged hardware and software services:
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack .
Please see the following URL regarding Warranty Information For Your HP Products: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
For additional information regarding Worldwide Limited Warranty and Technical Support, please see the following
URL: ftp://ftp.compaq.com/pub/supportinformation/ejourney/176738.pdf
.
NOTE: Certain restrictions and exclusions apply. Consult the Customer Support Center at 1-800-567-1616 for details.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 10
QuickSpecs
Models
ProLiant BL10e P900-
512KB (ULV), 512-MB, 40-
GB ATA
311538-B21 (1 pack)
311539-B21 (10 pack)
Processor
Cache Memory
Memory
Network Controller
Hard Drive
Form Factor
HP ProLiant BL10e e-Class Server Blade
One Ultra-Low Voltage Intel Pentium III 900-MHz processor; 100-MHz front-side bus
512-KB Level-2 on-die cache
512 MB (Standard) to 1024 MB (Maximum) PC133-MHz Registered ECC SDRAM DIMM
Memory (1x512 MB)
Two Compaq NC3163 Fast Ethernet NICs Embedded 10/100 WOL (Wake On LAN) enabled with PXE
One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug 2.5² hard drive
Plugs vertically into HP ProLiant BL e-Class Server Blade Enclosure
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 11
QuickSpecs
Options
ProLiant BLe-Class
Unique Options
HP ProLiant BL10e e-Class Server Blade
Four (4) RJ-21 to RJ-45 cables for use with the RJ-21 Patch Panel interconnect tray
(10 foot cables)
Enclosure Shipping Bracket Kit
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.
257076-B21
293119-B21
Server Blade Enclosure ProLiant BL e-Class Server Blade Enclosure
ProLiant BL e-Class Server Blade Enclosure (includes 20 licenses for ProLiant Essentials Rapid
Deployment Pack at 50% of the standard per-node license list price)
Interconnect Trays (each includes an Integrated
Administrator module)
Interconnect Tray, ProLiant BL e-Class C-GbE Interconnect Switch
Interconnect Tray, RJ-21 Patch Panel
Interconnect Tray, RJ-45 Patch Panel
ProLiant Essentials
Value Pack Software
Memory
(SDRAM DIMMs)
243280-B21
273644-B21
243283-B21
253177-B21
243282-B21
ProLiant Essentials Rapid Deployment Pack (1 node license, V1.1)
NOTE: Each server blade bay slot populated by a server blade requires one license.
ProLiant Essentials Rapid Deployment Pack (10 node license, V1.1)
ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning Manager version 2.0)
NOTE: For more information regarding ProLiant Essentials Software, please see the following
URL: http://www.compaq.com/proliantessentials .
267196-B21
269817-B21
303284-B21
512-MB PC 133-MHz Registered ECC SDRAM DIMM Memory Option Kit (1 x 512 MB)
256-MB PC 133-MHz Registered ECC SDRAM DIMM Memory Option Kit (1 x 256 MB)
128-MB PC 133-MHz Registered ECC SDRAM DIMM Memory Option Kit (1 x 128 MB)
128279-B21
128278-B21
128277-B21
UPS and PDU Power Cord
Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units: ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf
.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 12
UPS Options
QuickSpecs
Options
HP ProLiant BL10e e-Class Server Blade
Uninterruptible Power
Systems- Rack
Compaq UPS R1500 XR (1440VA, 1340 Watt), Low Voltage (NA)
Compaq UPS R1500 XR (1500VA, 1340 Watt), High Voltage (Int'l)
Compaq UPS R1500 XR (1500VA, 1340 Watt), Low Voltage (Japan)
Compaq UPS R3000 XR (2880VA, 2700 Watt), Low Voltage (NA)
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage (NA)
Compaq UPS R3000 XR (2400VA, 2250 Watt), Low Voltage (Japan)
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Japan)
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Int'l – detachable cord)
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug)
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage
(16A CEE 7/7 SCHUKO Plug)
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug)
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (NA)
NOTE: The UPS R6000 has a hardwired input.
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Int'l)
NOTE: The UPS R6000 has a hardwired input.
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Japan)
NOTE: The UPS R6000 has a hardwired input.
UPS R12000 XR N+ x (200-240V) (WW-hardwired)
NOTE: The UPS R12000 XR has a hardwired input and output.
204404-001
204404-B31
204404-291
192186-001
192186-002
192186-291
192186-292
192186-B31
192186-B32
192186-B33
192186-AR1
347207-001
347207-B31
347207-291
207552-B22
SNMP Serial Port Card
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.
Six Port Card
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.
High to Low Voltage Transformer (250VA)
NOTE: Supports R6000 UPS series only. 2.5 amps @ 125 Volts max output across two NEMA 5-
15.
Extended Runtime Module, R1500 XR
NOTE: 2U each, two ERM maximum.
Extended Runtime Module, R3000 XR
NOTE: 2U each, one ERM maximum.
Extended Runtime Module, R6000
NOTE: 3U each, two ERM maximum.
Extended Runtime Module, R12000 XR, 4U
NOTE: 4U each, two ERM maximum.
R12000 XR BackPlate Receptacle Kit, (2) L6-30R (NA)
NOTE: The R12000 XR BackPlate Kit has a hardwired input.
R12000 XR BackPlate Receptacle Kit, (2) IEC-309R (WW)
NOTE: The R12000 XR BackPlate Kit has a hardwired input.
SNMP-EN Adapter
NOTE: Supports R6000 UPS series only.
Multi-Server UPS Card
NOTE: Supports R6000 UPS series only.
Scalable UPS Card
NOTE: Supports R6000 UPS series only.
192189-B21
192185-B21
388643-B21
218971-B21
192188-B21
347224-B21
217800-B21
325361-001
325361-B21
347225-B21
123508-B21
123509-B21
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 13
QuickSpecs
Options
HP ProLiant BL10e e-Class Server Blade
Rack-Mountable PDUs –
1U/0U (Up to 12 outlets)
NOTE: 0U mounting brackets shipped with the unit
(separate option kit for 1U mounting).
Compaq Power Distribution Unit-16A (200 to 240V) (WW)
NOTE: The 16A PDU also connects to the high volt models of the UPS R3000 XR (need cable PN
340653-001 (NA)) and the UPS R6000 models. Cable PN 340653-001 required if connecting to
UPS R3000 XR (192186-002 NA-High Volt model only).
Compaq Power Distribution Unit-32A (200 to 240V) (Int'l)
Compaq Power Distribution Unit-40A (200 to 240V) (WW)
NOTE: Please see the following Power Distribution Unit (Zero-U/1U PDU) QuickSpecs for additional options, including cables: http://h18000.www1.hp.com/products/quickspecs/10838_na/10838_na.HTML
(North America) http://h18000.www1.hp.com/products/quickspecs/10838_div/10838_div.HTML
(Worldwide)
207590-B21
207590-B31
207590-B23
Modular PDUs 1U/0U
(Up to 32 outlets)
Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW)
NOTE: This model has a detachable input power cord and is adaptable to country specific requirements. The 16A PDU also connects to the high volt models of the UPS R3000 XR and
R6000 models. Cable P/N 340653-001 required if connecting to UPS R3000 XR (192186-002 NA
–High Volt model only).
NOTE: 1U/0U mounting brackets shipped with the unit
(optimized for 10000 and
9000 series racks).
Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)
(NA, Japan)
NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS
R3000 XR.
Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
(NA, Japan)
Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)
Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW)
NOTE: This mPDU (252663-B21), 40A model has a hardwired input.
NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs)
QuickSpecs for additional options including shorter jumper cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.HTML (North America) http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.HTML
(Worldwide)
PDU Options 1U PDU Mounting Brackets Kit
NOTE: The 1U PDU Mounting Brackets are required when mounting PDU's PN 207590-xxx series in 1U configurations.
Third Party PDU Mounting Kit
NOTE: This kit allows you to mount the Modular PDUs in racks other than the 9000/10000 Series racks (any racks using the standard 19" rail). For more details please refer the Modular PDU
QuickSpecs.
USB Options USB Optical Scroll Mouse (Carbonite)
USB 1.44-MB External Diskette Drive (Carbonite)
TEAC USB CD-ROM
NOTE: The TEAC USB CD ROM Drive must be purchased directly from TEAC or a TEAC reseller.
USB Easy Access Keyboard (Carbonite/Silver)
252663-B24
252663-D71
252663-D72
252663-B31
252663-B21
215852-B21
310777-B21
DD441B
DC141B
TEAC CD-210
DC168B#
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 14
QuickSpecs
Options
HP ProLiant BL10e e-Class Server Blade
ABE
ABF
ABH
ABJ
ABM
ABN
ABS
AB6
AB7
AB8
AB9
ABA
ABB
ABC
ABD
USB Easy Access Keyboard (Carbonite) Country Key Code
Dash # Description Dash #
A2M
AB0
AB1
AB2
ICELAND
TAWA
KOR
PRC
ABT
ABU
ABV
ABX
FRA
GRK
TURK
PORT
US
EURO
FCAN
GR
ABY
ABZ
AC0
AC4
ACB
AKB
AKC
AKD
SP
FR
NL
Japan
LA
NOR
SW
AKL
AKN
AKR
ARK
B15
UUZ
Description
HE
UK
ARA
FIN
DEN
ITL
BEL
BRZ
RUSS
CZE
HUNG
POL
THAI
BHCSY
SLOV
ICELAND
KAZ
SWISS
Rack Builder Please see the Compaq Rack Builder for configuration assistance at http://www.compaq.com/rackbuilder/ .
HP Rack 10000 Series
(Graphite Metallic)
S10614 (14U) Rack Cabinet - Shock Pallet
HP Rack 10647 (47U) – Pallet
HP Rack 10647 (47U) – Crated
HP Rack 10642 (42U) – Pallet
HP Rack 10642 (42U) – Shock Pallet
HP Rack 10642 (42U) – Crated
HP Rack 10636 (36U) – Pallet
HP Rack 10636 (36U) – Shock Pallet
HP Rack 10636 (36U) – Crated
HP Rack 10622 (22U) – Pallet
HP Rack 10622 (22U) – Shock Pallet
HP Rack 10622 (22U) – Crated
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
-B23 (crated) used for air shipments of empty racks
NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.HTML (Worldwide) http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML
(North America)
NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html
.
292302-B22
245160-B21
245160-B23
245161-B21
245161-B22
245161-B23
245162-B21
245162-B22
245162-B23
245163-B21
245163-B22
245163-B23
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 15
QuickSpecs
Options
HP ProLiant BL10e e-Class Server Blade
Rack 9000 Series (opal) Compaq Rack 9136 (36U) – Pallet
Compaq Rack 9136 (36U) – Shock Pallet
Compaq Rack 9136 (36U) – Crated
Compaq Rack 9122 (22U) – Pallet
Compaq Rack 9122 (22U) – Shock Pallet
Compaq Rack 9122 (22U) – Crated
Compaq Rack 9842 (800mm wide, 42U) – Pallet
NOTE: –B21 (pallet) used to ship empty racks shipped on a truck
–B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
–B23 (crated) used for air shipments of empty racks
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/10366_div/10366_div.HTML (Worldwide) http://h18000.www1.hp.com/products/quickspecs/10366_na/10366_na.HTML
(North America)
NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html
.
120664-B21
120664-B22
120664-B23
120665-B21
120665-B22
120665-B23
222192-B21
Rack Options for HP Rack
10000 Series
Rack Blanking Panels – Graphite (Multi)
NOTE: Contains one each of 1U, 2U, 4U and 8U.
Rack Blanking Panels – Graphite (1U)
NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (1U).
Rack Blanking Panels – Graphite (2U)
NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (2U).
Rack Blanking Panels – Graphite (3U)
NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (3U).
Rack Blanking Panels – Graphite (4U)
NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (4U).
Rack Blanking Panels – Graphite (5U)
NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (5U).
600mm Stabilizer Kit – Graphite
Baying Kit for Rack 10000 series (Carbon)
42U Side Panel – Graphite Metallic
110V Fan Kit (Graphite)
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.
220V Fan Kit (Graphite)
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.
36U Side Panel – Graphite Metallic
47U Side Panel – Graphite Metallic
Monitor/Utility Shelf - Graphite
9000/10000 Series Offset Baying Kit (42U)
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks.
NOTE: For more information on rack and rack options, please visit the following url: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html
.
253214-B26
253214-B21
253214-B22
253214-B23
253214-B24
253214-B25
246107-B21
248929-B21
246099-B21
257413-B21
257414-B21
246102-B21
255486-B21
253449-B21
248931-B21
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 16
QuickSpecs
Options
Rack Options for
Rack 9000 Series
HP ProLiant BL10e e-Class Server Blade
Baying/Coupling Kit
42U Side Panel
NOTE: The 42U Side Panel (PN 120670-B21) supports the HP Rack 9142 and HP Rack 9842.
36U Side Panel
NOTE: The 36U Side Panel (PN 120671-B21) supports the HP Rack 9136.
600mm Stabilizer Option Kit
800mm Stabilizer Option Kit (Opal)
NOTE: The 800mm Stabilizer Kit (PN 234493-B21) supports the Rack 9842 only
Rack Blanking Panel (Multi)
NOTE: Kit includes four panels in 1U, 2U, 4U, and 8U.
Rack Blanking Panels (1U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (1U).
Rack Blanking Panels (2U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (2U).
Rack Blanking Panels (3U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U).
Rack Blanking Panels (4U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U).
Rack Blanking Panels (5U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U)
9142 Extension Kit
NOTE: The 9142 Extension Kit (PN 120679-B21) supports the Compaq Rack 9142 only.
9136 Extension Kit
9142 Short Rear Door
NOTE: The 9142 Short Rear Door (PN 218217-B21) supports the HP Rack 9142 only.
9136 Short Rear Door
Split Rear Door (Opal)
NOTE: The Split Rear Door (PN 254045-B21) supports the 600 mm wide, 42U 9000 series rack.
9142 Split Rear Door
9000/10000 Series Offset Baying Kit
NOTE: This kit can be used to connect 9000 and 10000 series racks in 42U height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks.
NOTE: For more information on rack and rack options, please visit the following url: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html
.
120669-B21
120670-B21
120671-B21
120673-B21
234493-B21
169940-B21
189453-B21
189453-B22
189453-B23
189453-B24
189453-B25
120679-B21
218216-B21
218217-B21
218218-B21
254045-B21
254045-B21
248931-B21
Rack Options for
Rack 7000 Series and
Telco racks
High Air Flow Rack Door Insert for the 7122 Rack
High Air Flow Rack Door Insert for the 7142 Rack (single)
High Air Flow Rack Door Insert for the 7142 Rack (6-pack)
Compaq Networking Cable Management Kit
Compaq Rack Extension Kit for 7142
157847-B21
327281-B21
327281-B22
292407-B21
154392-B21
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 17
QuickSpecs
Options
HP ProLiant BL10e e-Class Server Blade
Rack Options for Rack
7000, 9000 and 10000
Series
Monitor Utility Shelf
Ballast Option Kit
100kg Sliding Shelf
Rack Rail Adapter Kit (25" depth)
Cable Management D-Rings Kit
100-kg Shelf Kit
NOTE: This 100Kg Shelf Kit (PN 234672-B21) supports the Rack 10000 and 9000 series only.
NOTE: For more information on rack and rack options, please visit the following url: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html
.
303606-B21
120672-B21
234672-B21
120675-B21
168233-B21
234672-B21
266076-B21
293119-B21
Rack Options for HP,
Compaq-branded, Third
Party and Telco racks
Telco rack-mounting hardware kit for ProLiant BL e-Class Server Blade Enclosure
Enclosure Shipping Bracket Kit
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.
Service and Support
Offerings (HP Care Pack
Services)
Extend hardware warranty on ProLiant BL e-Class server blades from 1 Yr parts to 3 Yr parts, advanced exchange, next day response on up to 20 ProLiant BL e-Class server blades internal to a single ProLiant e-Class server blade enclosure. (6-3 Part Number for U.S.)
Uplift hardware warranty on ProLiant BL e-Class server blades from 1 yr parts to 3 yrs, 9x5, on-site hardware maintenance, next day response for a Compaq fully configured ProLiant BL e-
Class server blade enclosure with up to 20 server blades and one interconnect tray. (6-3 Part
Number for U.S.)
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (6-3 Part Number for U.S.)
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (6-3 Part Number for U.S.)
One time new product installation ProLiant BL e-Class server blade enclosure including up to 20
ProLiant BL e-Class server blades and one interconnect tray. (6-3 Part Number for U.S.)
Extend hardware warranty on ProLiant BL e-Class server blades from 1 Yr parts to 3 Yr parts, advanced exchange, next day response on up to 20 ProLiant BL e-Class server blades internal to a single ProLiant e-Class server blade enclosure. (Electronic HP Care Pack 6-3 Part Number for U.S.)
Extend hardware warranty on ProLiant BL e-Class server blades from 1 Yr parts to 3 Yr parts, advanced exchange, next day response on up to 20 ProLiant BL e-Class server blades internal to a single ProLiant e-Class server blade enclosure. (Electronic HP Care Pack 2-5-2 Part Number for Canada)
Uplift hardware warranty on ProLiant BL e-Class server blades from 1 yr parts to 3 yrs, 9x5, on-site hardware maintenance, next day response for a Compaq fully configured ProLiant BL e-
Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic
HP Care Pack 6-3 Part Number for U.S.)
Uplift hardware warranty on ProLiant BL e-Class server blades from 1 yr parts to 3 yrs, 9x5, on-site hardware maintenance, next day response for a Compaq fully configured ProLiant BL e-
Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic
HP Care Pack 2-5-2 Part Number for Canada)
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic HP Care Pack 6-3 Part Number for U.S.)
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic HP Care Pack 2-5-2 Part Number for Canada)
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic HP Care Pack 6-3 Part Number for U.S.)
DA - 11057 Worldwide — Version 25 — October 24, 2003
274363-002
274364-002
274365-002
274366-002
274367-002
302194-001
FP-J1MEC-36
302195-001
FP-J1XEC-36
302196-001
FP-J14EC-36
302197-001
Page 18
QuickSpecs
Options
HP ProLiant BL10e e-Class Server Blade
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic HP Care Pack 2-5-2 Part Number for Canada)
One time new product installation ProLiant BL e-Class server blade enclosure including up to 20
ProLiant BL e-Class server blades and one interconnect tray. (Electronic HP Care Pack 6-3 Part
Number for U.S.)
One time new product installation ProLiant BL e-Class server blade enclosure including up to 20
ProLiant BL e-Class server blades and one interconnect tray. (Electronic HP Care Pack 2-5-2
Part Number for Canada)
Extend hardware warranty on ProLiant BL e-Class server blades from 1 Yr parts to 3 Yr parts, advanced exchange, next day response on up to 20 ProLiant BL e-Class server blades internal to a single ProLiant e-Class server blade enclosure. (Electronic HP Care Pack 6-3 Part Number for EMEA)
Extend hardware warranty on ProLiant BL e-Class server blades from 1 Yr parts to 3 Yr parts, advanced exchange, next day response on up to 20 ProLiant BL e-Class server blades internal to a single ProLiant e-Class server blade enclosure. (6-3 Part Number for EMEA)
Uplift hardware warranty on ProLiant BL e-Class server blades from 1 yr parts to 3 yrs, 9x5, on-site hardware maintenance, next day response for a Compaq fully configured ProLiant BL e-
Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic
HP Care Pack 6-3 Part Number for EMEA)
Uplift hardware warranty on ProLiant BL e-Class server blades from 1 yr parts to 3 yrs, 9x5, on-site hardware maintenance, next day response for a Compaq fully configured ProLiant BL e-
Class server blade enclosure with up to 20 server blades and one interconnect tray. (6-3 Part
Number for EMEA)
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic HP Care Pack 6-3 Part Number for EMEA)
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (6-3 Part Number for EMEA)
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (Electronic HP Care Pack 6-3 Part Number for EMEA)
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a Compaq fully configured ProLiant BL e-Class server blade enclosure with up to 20 server blades and one interconnect tray. (6-3 Part Number for EMEA)
One time new product installation ProLiant BL e-Class server blade enclosure including up to 20
ProLiant BL e-Class server blades and one interconnect tray. (Electronic HP Care Pack 6-3 Part
Number for EMEA)
One time new product installation ProLiant BL e-Class server blade enclosure including up to 20
ProLiant BL e-Class server blades and one interconnect tray. (6-3 Part Number for EMEA)
NOTE: For more information, customer/resellers can contact http://www.compaq.com/services .
FP-J17EC-36
302198-001
FP-J1INS-EC
207023-021
207023-022
207024-021
207024-022
207025-021
207025-022
207026-021
207026-022
204563-021
204563-022
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 19
QuickSpecs
Memory
HP ProLiant BL10e e-Class Server Blade
ProLiant BL10e Server Blade
Standard Memory
512-MB PC 133-MHz Registered ECC SDRAM DIMM installed (1 x 512-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 1024 MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits.
Memory Slot
1 2
Standard
Optional
Optional
Maximum
512 MB
640 MB
768 MB
1024 MB
512 MB
512 MB
512 MB
512 MB
Empty
128 MB
256 MB
512 MB
Following are memory options available from HP:
512-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit (1 x 512 MB)
256-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit (1 x 256 MB)
128-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit (1 x 128 MB)
128279-B21
128278-B21
128277-B21
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 20
QuickSpecs
TechSpecs
HP ProLiant BL p-Class
Server Blade Enclosure
Dimensions
Weight
Power Supply
Non-Hot Plug Ultra
ATA/100 Hard Drives
HP ProLiant BL10e e-Class Server Blade
Height
Width
Depth
Interconnect Tray
20 server blades
Enclosure with 2 power supplies
Total weight fully loaded
5.25 in (13.35 cm) (3U)
17.5 in (44.45 cm)
28.35 in (72.01 cm)
4.5 lb (2.04 kg)
35 lb (15.86 kg)
54.5 lb (24.7 kg)
94 lb (41.73 kg)
600W, Hot-Plug Redundant
(2 standard)
Input Specifications
Two Redundant Power Supplies (optimized to provide full redundancy at 120 and 220 volts)
Normal Line Voltage
Range Input Line
100 to 127VAC, 200 to 240VAC
90 to 264VAC
Frequency Range
Power Factor
Input Current
Inrush Current
43 to 63Hz
> 0.95 (120Vac/Max Load)
8.5A @ 120VAC, 4.3A @ 240VAC
25A
General Specifications
Holdup Time
Full Output Rating
Minimum Load
Input to Output
25mS
600W
1500Vac or 2150Vdc (1 Min.) Dielectric Voltage
Withstand
Input Transient
Susceptibility
Input to Ground
Common and Differential Mode 2200V
(superimposed on AC line)
Differential Mode
1500Vac or 2150Vdc (1 Min.)
1100V
NOTES: ProLiant BL e-Class Power Calculator is available from the product page at the following address: http://www.Compaq.com/products/servers/proliant-bl/e-class/index.html
Click "Power Calculator" in the "Support" section.
40 GB 5.4 K Capacity
Height
Width
Interface
Transfer Rate
Synchronous
(Maximum)
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
40,007 MB
0.374 in (9.5 mm)
2.756 in (70 mm)
Ultra ATA-5 (IDE) 100 MB/s
27.8 to 44.1 MB/sec (Disk-Buffer)
Single Track 13 ms
Rotational Speed
Bytes/Sector
Logical Blocks
5,400 RPM
512
78,140,160 (LBA)
41° to 131° F (5° to 55° C) (Ambient)
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 21
QuickSpecs
TechSpecs
HP ProLiant BL10e e-Class Server Blade
Two Compaq NC3163 Fast
Ethernet NIC Embedded
10/100 WOL (Wake on LAN)
Network Interface
Compatibility
Data Transfer Method
Network Transfer Rate
Connector
Cable Support
10Base-T/100Base-TX
IEEE 802.3/802.3u compliant
32-bit bus-master PCI
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
100Base-TX (Half-Duplex)
10 Mb/s
20 Mb/s
100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
Mates into enclosure center wall assembly
10Base-T
100Base-TX
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
HP ProLiant BL e-Class C-
GbE Interconnect Switch
General
Performance
Forwarding Mode
MAC Addresses
Memory
Ports
Management
Two 24-port Managed Layer 2 Ethernet switches for server network cable reduction
Fully pre-configured for immediate operation
4.0 Gbps Switching bandwidth
12 Million pps aggregate throughput (64-byte packets)
Full-wire speed for all connections
Store and forward
16,382; MAC address based filtering and MAC address packet priority configuring
64MB Main
12MB Flash
32MB Packet Buffer
Four RJ-45 10/100/1000 T/TX/T Gigabit Ethernet uplink ports for customer use
Forty 10/100 T/TX fast Ethernet downlink ports dedicated to server blade to interconnect switch network connections
Two 10/100 T/TX Fast Ethernet ports dedicated to inter-switch module communications
One RS-232 DB-9 port (console connector for Integrated Administrator)
One 10/100 T/TX Fast Ethernet port (Network management connector for Integrated
Administrator)
Auto-negotiation and auto-sensing with full-duplex
Web-based interface with graphical user interface
Console menu driven Interface via local RS-232 and Telnet
Scriptable command line interface (CLI)
SNMP v1 (RFC 1157) with scripting tool and example scripts
RMON v1 (RFC 1757) groups 1, 2, 3, and 9
Telnet (RFC 854)
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC
2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, Ethernet MIB (RFC1643) and HPspecific switch MIBs
64 Port-based IEEE 802.1Q tagged VLANs per switch module
XML human read/write configuration file
TFTP client (RFC 783) for backup and remote download of configuration and history log files
IGMP (Internet Group Management Protocol) multicasting
EtherChannel (Fast EtherChannel, GigaChannel) compatible trunking
Uplink port speed and link activity LEDs
Simple network time protocol (SNTP)
Broadcast, multicast, and DA-unknown packet storm control
BootP and DHCP client support
BootP and DHCP client support
Port mirroring
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 22
QuickSpecs
TechSpecs
HP ProLiant BL10e e-Class Server Blade
IEEE Standards
Compliance
Form Factor
Network Transfer Rate
Cable Support
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Quality of Service (QoS) Packet Prioritization
IEEE 802.3ac and 802.1Q Port Based Tagged VLANs and VLAN Extensions
IEEE 802.1Q Trunking Encapsulation
IEEE 802.3x Flow Control
Removable interconnect tray that plugs into the rear of the server blade enclosure
10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex)
100Base-TX (Half-Duplex)
20 Mb/s
100 Mb/s
100Base-TX (Full-Duplex)
1000Base-T (Full-Duplex)
1000Base-T (Full-Duplex)
10Base-T
100Base-TX
1000Base-T
200 Mb/s
2000 Mb/s
2000 Mb/s
Categories 3, 4 or 5 UTP;up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
© Copyright 2003 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 11057 Worldwide — Version 25 — October 24, 2003 Page 23
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project