Converters.TV DVI over CAT5e/6 Transmitter and Receiver User Manual

DVI over CAT5e/6 Transmitter and Receiver extender -

ID# 15180

Operation Manual

Introduction

Features

Applications

The DVI Extender over single CAT5e/6 allows for a more efficient system setup and is easy to install.

Uncompressed video and audio can be transmitted to distances of up to 60 meters at 1080p and 3D with High-Definition Audio up to 7.1CH (with HDMI to DVI adaptor).

Designed with HDBaseT technology for greater flexibility in custom installations with full DVI signal transfer over a single CAT5e/6 cable.

●

●

●

●

Complies with the HDBaseT-Lite class

Supports HDMI (including HDCP with HDMI to DVI adaptor) over a single CAT5e/6 up to 60m

Full HD resolution support (1080p@60Hz/36-bit) and PC resolution support (VGA to WUXGA) over CAT5e/6 cable

Compact size with stylish design

●

●

●

●

●

Residential entertainment Installations

University lecture room display

Retail sales display

Meeting room presentation

Commercial advertising display

System Requirements

DVI source equipment such as DVD/Blu-ray player/PC and

TV/monitor/projector with DVI input and DVI and CAT5e/6 cables.

Operation Controls and Functions

Transmitter Front and Rear Panel

Back Panel

1. DVI IN: Connect to the DVI source device such as a DVD player or

PC/Laptop with DVI cable.

2. DC 5V: Connect the 5V DC power supply into the unit and Plug the adaptor to an AC outlet.

3. CAT5e/6 OUT: Connect to the receiver unit with a single CAT5e/6 cable to receive all data signals.

1. DC 5V: Connect the 5V DC power supply into the unit and plug the adaptor to an AC outlet.

2. CAT5e/6 IN: Connect to the transmitter unit with a single CAT5e/6 cable for transmission of all data signals.

3. DVI OUT: Connect to a DVI equipped TV/monitor for display of the

DVI input source signal.

Transmitter and Receiver Top Panels

Connection Diagram

1. LINK LED: This LED will illuminate in blue when the devices are connected with a CAT5e/6 cable. If the data transmission has an error the LED will blink.

Specifications

Video Bandwidth

Transmitter Input

Output

Receiver Input

Output

ESD Protection

Power Supply

300 MHz/10.2 Gbps

1×DVI

1×RJ45

1×RJ45

1×DVI

Human Body Model:

±8kV (air-gap discharge)

±4kV (contact discharge)

2×5 V/2.6 A DC (US/EU standards,

CE/FCC/UL certified)

Dimensions

Weight

Chassis Material

Silkscreen Color

55 mm (W)×82 mm (D)×22.5 mm (H)/each

Plastic

White

56 g (TX), 64 g (RX)

Operating Temperature 0 ˚C~40 ˚C/ 32 ˚F~104 ˚F

Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F

Relative Humidity

Power Consumption

20~90 % RH (non-condensing)

3 W (TX), 5.5 W (RX)