Multitech MultiModem MTCBA-G2-EN2 User guide
Pubblicità
Pubblicità
MultiModem
®
rCell
Intelligent Wireless Router
User Guide
Copyright and Technical Support
MultiModem® rCell User Guide
Intelligent Wireless Router
MTCBA-H-EN2 , MTCBA-G2-EN2, MTCBA-E1-EN2, MTCBA-C1-EN2
S000456D, Revision D
Copyright
This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech
Systems, Inc. All rights reserved.
Copyright © 2009 - 10 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc., to notify any person or organization of such revisions or changes.
Check Multi-Tech’s Web site or product CD for current versions of our product documentation.
Record of Revisions
Revision Date Description
A 05/26/09 Initial release.
B
C
D
02/17/10
03/15/10
05/05/10
This release documents firmware version 2.5.
Add MTCBA-G2-EN2
Add MTCBA-E1-EN2 and MTCBA-C1-EN2
Trademarks
Trademarks and registered trademarks of Multi-Tech Systems, Inc. include MultiModem, the Multi-Tech logo, and Multi-Tech.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. All other products or technologies referenced in this manual are the trademarks or registered trademarks of their respective holders.
Contacting Multi-Tech Support
Online Support Portal: https://support.multitech.com
In order to better serve our customers, manage support requests and shorten resolution times, we have created the online web portal allowing you to submit questions regarding Multi-Tech products directly to our technical support team. Get answers to your most complex questions, ranging from implementation, troubleshooting, product configuration, firmware upgrades and much more.
To create an account and submit a Support Case on the Portal, visit https://support.multitech.com
.
Knowledge Base and Support Services:
www.multitech.com/support.go
The Knowledge Base provides immediate answers to your questions and gives you access to support resolutions for all Multi-
Tech products. Visit our support area on the website for other support services.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive, Mounds View, Minnesota 55112
Phone: 763-785-3500 or 800-328-9717 Fax: 763-785-9874 www.multitech.com
Technical Support
Business Hours: M-F, 9am to 5pm CST
Country By Email
Europe, Middle East, Africa: [email protected]
U.S., Canada, all others: [email protected]
Warranty
Warranty information can be found at: http://www.multitech.com/warranty.go
By Phone
(44) 118 959 7774
(800) 972-2439 or (763) 717-5863
2 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Table of Contents
Table of Contents
CHAPTER 1 – INTRODUCTION AND PRODUCT DESCRIPTION ......................................................................... 5
MultiModem MTCBA-H-EN2 (HSDPA) .........................................................................................................................................5
MultiModem MTCBA-G2-EN2 ......................................................................................................................................................5
MultiModem MTCBA-E1-EN2 (EDGE) ........................................................................................................................................5
MultiModem MTCBA-C1-EN2 CDMA 1xRTT ...............................................................................................................................6
Safety Warnings ...........................................................................................................................................................................6
Ethernet Ports Caution .................................................................................................................................................................6
Handling Precautions ....................................................................................................................................................................6
Vehicle Safety ...............................................................................................................................................................................6
Internal Lithium Battery .................................................................................................................................................................6
Front Panel ...................................................................................................................................................................................7
Package Contents ........................................................................................................................................................................7
Specification .................................................................................................................................................................................8
Power ...........................................................................................................................................................................................9
RF Specifications ..........................................................................................................................................................................9
RS232 9-Pin Functions of the Female End Connector .................................................................................................................9
CHAPTER 2 – ACTIVATION AND INSTALLATION .............................................................................................. 10
Account Activation for Wireless Devices ..................................................................................................................................... 10
Insert the SIM Card into Holder, If required ................................................................................................................................ 10
Making the Connection ............................................................................................................................................................... 11
Optional – Attach the Router to a Flat Surface ........................................................................................................................... 12
Set Your PC’s TCP/IP Address for Ethernet Functionality .......................................................................................................... 13
AT Command for Verifying Signal Strength ................................................................................................................................ 15
AT Command for Checking Network Registration and Roaming Status ..................................................................................... 15
Exiting Modem Mode .................................................................................................................................................................. 15
Configure the Ethernet Interface Using the Web Management Software ................................................................................... 16
Shutdown Caution ...................................................................................................................................................................... 18
CHAPTER 3 – USING THE WEB MANAGEMENT SOFTWARE .......................................................................... 19
Navigating the Web Management Software ............................................................................................................................... 19
Web Management Software Screens ......................................................................................................................................... 21
IP Setup ...................................................................................................................................................................................... 21
PPP ............................................................................................................................................................................................ 27
Networks & Services ................................................................................................................................................................... 33
GRE Tunnels .............................................................................................................................................................................. 39
DHCP Server .............................................................................................................................................................................. 41
IPSec .......................................................................................................................................................................................... 43
Add IKE Connection ........................................................................................................................................................ 44
71BAdd Manual Connection .................................................................................................................................................. 46
72BAdd Manual Connection .................................................................................................................................................. 46
Serial-Port ................................................................................................................................................................................... 48
Serial-Port > Serial Port Settings ................................................................................................................................................ 48
Tools ........................................................................................................................................................................................... 51
Tools > Save Configuration ............................................................................................................................................. 52
Statistics & Logs ......................................................................................................................................................................... 53
80BStatistics & Logs > System Information ........................................................................................................................... 53
81BStatistics & Logs > Ethernet ............................................................................................................................................ 54
82BStatistics & Logs > PPP .................................................................................................................................................. 55
83BStatistics & Logs > PPP Trace ........................................................................................................................................ 56
86BStatistics & Logs > Modem Information ........................................................................................................................... 57
87BStatistics & Logs > Service Status ................................................................................................................................... 57
88BStatistics & Logs > TCP/UDP Client Live Log ................................................................................................................. 57
89BStatistics & Logs > TCP/UDP Server Live Log ................................................................................................................ 57
90BStatistics & Logs > IPSec Live Log .................................................................................................................................. 58
91BStatistics & Logs > IPSec Log Traces ............................................................................................................................. 58
APPENDIX A – A REFERENCE TABLE OF COMMONLY SUPPORTED SUBNETS .......................................... 59
APPENDIX B - ......................................................................................................................................................... 61
CELLULAR INFORMATION ................................................................................................................................... 61
Antenna System for Cellular Devices ......................................................................................................................................... 61
FCC Requirements for the Antenna............................................................................................................................................ 61
Antenna Specifications ............................................................................................................................................................... 61
CDMA RF Specifications ................................................................................................................................................. 61
Multi-Tech Systems, Inc. MultiModem rCell User Guide 3
Table of Contents
CDMA Antenna Requirements/Specifications ................................................................................................................. 61
PTCRB Requirements for the Antenna ........................................................................................................................... 61
GSM/EGSM RF Specifications ........................................................................................................................................ 61
GSM Antenna Requirements/Specifications ................................................................................................................... 62
HSDPA / UMTS RF Specifications .................................................................................................................................. 62
HSDPA / UMTS Antenna Requirements/Specifications .................................................................................................. 62
GPS (Global Positioning) RF Specifications .................................................................................................................... 62
GPS Antenna Requirements/Specifications .................................................................................................................... 62
APPENDIX C – REGULATORY COMPLIANCE .................................................................................................... 64
92BEMC, Safety, and R&TTE Directive Compliance ............................................................................................................. 64
94BFCC Part 15 Class A Statement ...................................................................................................................................... 64
95BIndustry Canada .............................................................................................................................................................. 64
APPENDIX D – WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT .......................................................... 65
APPENDIX E – ENVIRONMENTAL INFORMATION ............................................................................................. 66
Restriction of the Use of Hazardous Substances (RoHS) ........................................................................................................... 66
REACH Statement ...................................................................................................................................................................... 68
INDEX ...................................................................................................................................................................... 69
4 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 1 – Product Description and Specifications
Chapter 1 – Introduction and Product
Description
This User Guide describes the MultiModem® rCell, Intelligent Wireless Router with an Ethernet 2 interface. The MultiModem rCell Router is configured for one of three connectivity modes: always-on, wake-up on ring, or dial-on demand. The always-on network connection automatically establishes a wireless data connection and allows for around the clock surveillance, monitoring or real time data acquisition of any remote Ethernet device such as a Web camera. If the data link is dropped in the event of poor reception or a complete loss of service, it will automatically re-establish the data link. The wake-up on ring configuration allows the router to “wake up” and initiate a connection when it detects an incoming ring. For security reasons, you can setup the router to wake up based on a particular caller ID number. This configuration is ideal for reducing the costs associated with the modem being online and available 24/7. When configured for dial-on demand, the router only accesses the
Internet when data is present. This configuration is ideal for sharing Internet access among networked PCs.
Modem MTCBA-H/G2/E1-EN2
Model MTCBA-C1-EN2
MultiModem MTCBA-H-EN2 (HSDPA)
The MultiModem MTCBA-H-EN2 wireless router delivers some of the fastest cellular data speeds by utilizing HSDPA technology. It allows users to connect to the Internet and send and receive data faster than possible with an ordinary
GSM/GPRS network making it ideal for highly data-intensive applications. Based on industry-standard open interfaces, the
MultiModem MTCBA-H-EN2 wireless router is equipped with quad-band, high-speed RS232 technology, which means it can be used worldwide on all existing GSM networks.
AT Commands: The MultiModem MTCBA-H-EN2 wireless router is configured using the HSDPA AT
Commands. These commands are documented in the Reference Guide for the MultiModem Wireless
HSDPA Router, document number S000453x.
MultiModem MTCBA-G2-EN2
The MultiModem MTCBA-G2-EN2 wireless router offers standards-based quad-band GSM/GPRS Class 10 performance. It allows users to connect to the Internet and send and receive data faster than possible with an ordinary GSM/GPRS network making it ideal for highly data-intensive applications. Based on industry-standard open interfaces, the MultiModem
MTCBA-G2-EN2 wireless router is equipped with quad-band, high-speed RS232 technology, which means it can be used worldwide on all existing GSM networks.
AT Commands: The MultiModem MTCBA-G2-EN2 wireless router is configured using the GPRS AT
Commands. These commands are documented in the Reference Guide for the MultiModem Wireless
GPRS Router, document number S000463x.
MultiModem MTCBA-E1-EN2 (EDGE)
The MultiModem MTCBA-E1-EN2 wireless router delivers some of the fastest cellular wireless data speeds utilizing EDGE technology. It allows users to connect to the Internet, send and receive data up to three times faster than possible with an ordinary GSM/GPRS network making it ideal for highly data-intensive multimedia applications.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 5
Chapter 1 – Product Description and Specifications
AT Commands: The MultiModem MTCBA-E1-EN2 wireless router is configured using the EDGE AT
Commands. These commands are documented in the Reference Guide for the MultiModem Wireless EDGE
Modems, document number S000371x.
MultiModem MTCBA-C1-EN2 CDMA 1xRTT
The MultiModem MTCBA-C1-EN2 wireless router offers standards-based dual band CDMA 1xRTT performance via the integrated cellular modem. The intelligent embedded operating system allows for automatic/persistent connectivity for mission-critical applications and enhanced machine-to-machine (M2M) functionality.
AT Commands: The MultiModem MTCBA-C1-EN2 wireless router is configured using the CDMA-C1 AT
Commands. These commands are documented in the Reference Guide for the MultiModem Wireless
CDMA-C1 Modems, document number S000478x.
Safety Warnings
Ethernet Ports Caution
The Ethernet ports are not designed to be connected to a Public Telecommunication Network or used outside the building.
Handling Precautions
All devices must be handled with certain precautions to avoid damage due to the accumulation of static charge. Although input protection circuitry has been incorporated into the devices to minimize the effect of this static build up, proper precautions should be taken to avoid exposure to electrostatic discharge during handling and mounting .
Caution: Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s antenna and the body of the user or nearby persons. The router is not designed for, nor intended to be, used in applications within 20 cm (8 inches) of the body of the user.
RF Interference Issues
It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility of radio frequency, RF, interference. Please follow the safety advice given below carefully.
●
Switch OFF your Wireless MultiModem when in an aircraft. The use of cellular telephones in an aircraft may endanger the operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or both.
●
Switch OFF your Wireless MultiModem when around gasoline or diesel-fuel pumps and before filling your vehicle with fuel.
● Switch OFF your Wireless MultiModem in hospitals and any other place where medical equipment may be in use.
●
Respect restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress.
●
There may be a hazard associated with the operation of your Wireless MultiModem close to inadequately protected personal medical devices such as hearing aids and pacemakers. Consult the manufacturers of the medical device to determine if it is adequately protected.
●
Operation of your Wireless MultiModem close to other electronic equipment may also cause interference if the equipment is inadequately protected. Observe any warning signs and manufacturers’ recommendations.
Vehicle Safety
●
Do not use your Router while driving, unless equipped with a correctly installed vehicle kit allowing ‘Hands-Free’
Operation.
●
Respect national regulations on the use of cellular telephones in vehicles. Road safety always comes first.
●
If incorrectly installed in a vehicle, the operation of router telephone could interfere with the correct functioning of vehicle electronics. To avoid such problems, be sure that qualified personnel have performed the installation.
Verification of the protection of vehicle electronics should be part of the installation.
●
The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
Internal Lithium Battery
●
A lithium battery located within product provides backup power for the timekeeping capability. The battery has an estimated life expectancy of ten years.
●
When the battery starts to weaken, the date and time may be incorrect. If the battery fails, the board must be sent back to Multi-Tech Systems for battery replacement.
●
Lithium cells and batteries are subject to the Provisions for International Transportation. Multi-tech Systems Inc. confirms that the Lithium batteries used in the Multi-Tech product(s) referenced in this manual comply with Special
Provision 188 of the UN Model Regulations, Special Provision A45 of the ICAO-TI/IATA-DGR (Air), Special
Provision 310 of the IMDG Code, and Special Provision 188 of the ADR and RID (Road and Rail Europe).
Warning!
There is danger of explosion if the battery is incorrectly replaced!
6 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 1 – Product Description and Specifications
Front Panel
The front panel contains Power and Status LEDs, two Ethernet LEDs, two modem LEDs, and three signal LEDs. The Power
LED indicates that DC power is present and the Status LED blinks when the unit is functioning normally. The two Ethernet LEDs indicate transmit and receive activity and connection speed of 10 or 100Mbps on the Ethernet link. The two modem LEDs indicate carrier detection and link status. The three signal LEDs display the signal strength level of the wireless connection. The
SIM door on the right side of the router provides access to the SIM card holder on the MTCBA-H/G2/E1-EN2 versions.
Model MTCBA-H/G2/E1-EN2 Model MTCBA-C1-EN2
LED Indicators
Power Indicates presence of DC power when lit.
Status The LED is a solid light when the rCell is booting up, saving the configuration, restarting, or updating the firmware. When the Status LED begins to blink, the router is ready.
LNK Link. Blinks when there is transmit and receive activity on the Ethernet link. It shows a steady light when there is a valid Ethernet connection.
SPD Speed. Lit when the Ethernet is linked at 100 Mbps. If it is not lit, the Ethernet is linked at 10 Mbps.
CD Carrier Detect. Lit when data connection has been established.
LS Line Status Dependent on Model
MTCBA-H-EN2 MTCBA-G2-EN2 MTCBA-E1-EN2
Continuous “on” state
Indicates that the wireless modem is registered on the network.
Flashing state
Indicates attempted registration on network.
Off state
Modem could not register
Continuous “on” state
Indicates that the wireless modem is not registered on the network.
Flashing state
Indicates registration on network.
Off state
Modem is off (not ready) or in download mode.
Continuous “on” state
Indicates traffic between the Provider and the device.
Signal ALL OFF - Unit is off, not registered on network, or extremely week signal (0 < = RSSI < 6).
1 Bar “ON” – Very weak signal (7 < = RSSI <14)
1 Bar and 2 Bar “ON” – Weak signal (15 < = RSSI <23)
1 Bar, 2 Bar, and 3 Bar “ON” – Good signal (24 <= RSSI > = 31)
MTCBA-C1-EN2
Non-functional
Package Contents
Unbundled Package with
No Accessories
1 router
1 Quick Start Guide
1 MultiModem CD
Note: You must supply mounting screws,
DC power supply, and an antenna.
Bundled Package with Accessories
1 router
1 antenna
1 Ethernet cable
1 RS-232 cable
1 power supply
1 Quick Start Guide
1 MultiModem CD
Note : You must supply mounting screws.
Note: Your wireless provider will supply the SIM card.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 7
Chapter 1 – Product Description and Specifications
Specification
Features MTCBA-H-EN2
Performance HSDPA/UMTS
EDGE: Class 10
GPRS; Class 10
Band, Frequency Quad-band
GSM/GPRS/EDGE/HSDPA
850/900/1800/1900 MHz
UMTS FDD: Band I/
Band II/Band V
Packet Data HSDPA: UE CAT [1-6], 11,
12 supported, compressed mode according to 3GPP
TS5.212
EDGE: Class 10, full
PBCCH support, coding schemes CS-9,
Mobile station Class B
GPRS: Class 10, full PBCCH support, coding schemes CS1-4,
Mobile station Class B
Circuit-Switched
Data
GSM: Asynchronous, nontransparent up to 9600bps
UMTS: Asynchronous,non- transparent up to 64K bps
Text & PDU,Point-to-Point
(MO/MT), cell broadcast
Short Message
Services-SMS
Antenna
Connector
SIM Connector Standard 1.8/3V SIM receptacle
RS232 Connector
Power Connector
MTCBA-E1-EN2
EDGE: E-GPRS Class 10,
GPRS: Class 12
Quad-band
GSM/GPRS/EDGE
850/900/1800/1900 MHz
EDGE: E-GPRS Up to 240K bps, coding scheme MCS-9, mobile station Class B,
LLC layer, 4 time slots
GPRS: Full PBCCH support, coding scheme 1-4, mobile station Class B
Up to 14.4K bps, nontransparent
Text & PDU, Point-to-Point
(MO/MT), cell broadcast
MTCBA-G2-EN2
GPRS Class 10
Quad-band GSM/GPRS
850/900/1800/1900 MHz
Up to 85.6K bps, coding schemes CS1 to
CS4
MTCBA-C1-EN2
CDMA2000 1xRTT
Up to 14.4K bps transparent IS-95A, IS 95B up to 14.4K and non-transparent bps forward and reverse
Text & PDU, Point-to-Point, cell broadcast
Text & UCS-2, Point-to-
Point, cell broadcast
RF Antenna: 50 ohm SMA (female connector)
Dual-band 800/1900 MHz
CDMA
Up to 153.6K bps forward and reverse
Standard 1.8/3V SIM receptacle
DE9
Standard 1.8/3V SIM receptacle
2.5mm miniature(screw-on)
N/A
Voltage
Power*
9V to 32 VDC
Refer to Power measurements following this table
Physical
Description
Operating
Temperature **
7”W x 1.24”H x 2.7”D 0.78lbs
17.78cmW x3.15cmH x7.07cmD
0.355Kg
-30° to +60° C
UL listed @ 40°
-30° to +50° C
UL listed @ 40°
7”W x 1.24”H x 2.7”D 0.75lbs
17.78cmW x3.15cmH x7.07cmD 0.340Kg
-30° to +70° C
UL listed @ 40°
-30° to +50° C
UL listed @ 40°
Storage Temp
Humidity
-40° to +85° C
Relative humidity 20% to 90% noncondensing
Certifications EMC Compliance
FCC Part 15
EN55022, EN55024
Radio Compliance
EMC Compliance
FCC Part 15
EN55022, EN55024
Radio Compliance
EMC Compliance
FCC Part 15
EN55022, EN55024
Radio Compliance
EMC Compliance
FCC Part 15
Radio Compliance
FCC Part 22,24
RSS132,133 FCC Part 22,24
RSS132,133
EN301 489-1,
EN301 489-7,
EN301 489-24,
EN301 511
AS/ACIF S042.1,S042.3
Safety:
FCC Part 22,24
RSS132,133
EN301 489-1,
EN301 489-7,
FCC Part 22,24
RSS132,133
EN301 489-1,
EN301 489-7,
EN301 511 EN301 511
AS/ACIF S042.1,S042.3 AS/ACIF S042.1,S042.3
Safety:
UL60950-1,
Safety:
UL60950-1,
Safety:
UL60950-1,
cUL60950-1,
IEC60950-1
Network: CDG 1&2
UL60950-1,
cUL60950-1,
IEC60950-1
Network: PTCRB
cUL60950-1,
IEC60950-1
Network: PTCRB
cUL60950-1,
IEC60950-1
Network: PTCRB
* Multi-Tech Systems, Inc recommends that the customer incorporate a 10% buffer into their power source when determining product load.
** UL Listed @ 40°C. Limited by power supply. UL Certification does not apply or extend to an ambient above 40°C and has not been evaluated by UL for ambient greater than 40°C
“UL has evaluated this device for use in ordinary locations only. Installation in a vehicle or other outdoor locations has not been evaluated by UL. UL Certification does not apply or extend to use in vehicles or outdoor applications or in ambient above 40° C.”
Optional power must be UL Listed ITE power supply marked LPS or Class 2 related 9-32Vdc, 1.44-0.4A.
8 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 1 – Product Description and Specifications
Power
MTCBA-H-EN2
Sleep: 0.180A, 1.665W @ 9V,
0.092A, 1.84W @ 20V,
0.061A, 1.958W @ 32V
Typical: 0.480A, 4.382W @ 9V,
0.230A, 4.60W @ 20V,
0.015A, 4.80W @ 32V
Max: 0.665A, 6.025W @ 9V,
0.310A, 6.175W @ 20V,
0.200A, 6.40W @ 32V
MTCBA-G2-EN2 MTCBA-E1-EN2 MTCBA-C1-EN2
Sleep: 0.163A, 1.5W @ 9V,
0.082A, 1.6W @ 20V,
0.055A, 1.8W @ 32V
Typical: 0.240A, 2.2W @ 9V,
0.114A, 2.3W @ 20V,
0.077A, 2.5W @ 32V
Max: 0.340A, 3.0W @ 9V,
0.153A, 3.1W @ 20V,
0.100A, 3.2W @ 32V
Sleep: 0.175A,1.6W @ 9V,
0.090A, 1.8W @ 20V,
0.060A,1.9W @ 32V
Typical: 0.277A, 2.5W @ 9V,
0.133A, 2.7W @ 20V,
0.089A, 2.8W @ 32V
Max: 0.506A, 4.5W @ 9V,
0.240A, 4.8W @ 20V,
0.150A, 4.8W @ 32V
Peak: 1.30A @ 9V, 0.518A @ 20V,
0.343A @ 32V
Peak: 2.50A @ 9V, 1.00A @ 20V,
0.60A @ 32V
Sleep: 0.186A,1.7W @ 9V,
0.091A, 1.8W @ 20V,
0.061A,1.9W@ 32V
Typical: 0.283A, 2.6W @ 9V,
0.137A, 2.7W @ 20V,
0.088A, 2.8W @ 32V
Max: 0.457A, 4.1W, @ 9V,
0.214A, 4.3W, @ 20V,
0.138A, 4.4W @ 32V
RF Specifications
GSM/EGSM RF Specifications
Frequency RX
Frequency TX
GSM 850
869 to 894 MHz
824 to 849 MHz
EGSM 900
925 to 960 MHz
880 to 915 MHz
GSM 1800
1805 to 1800 MHz
1710 to 1785 MHz
GSM 1900
1930 to 1990 MHz
1850 to 1910 MHz
CDMA RF Specifications
Frequency RX
CDMA 800 CDMA 1900
869 to 894 MHz 1930 to 1990 MHz
Frequency TX 824 to 849 MHz 1850 to 1910 MHz
RS232 9-Pin Functions of the Female End Connector
The following table explains the pin functions.
External Power
Signal
Pin 1 CD
Pin 2 RX
Pin 3 TX
Pin 4 DTR
Pin 5 GND
Pin 6 DSR
Pin 7 RTS
Pin 8 CTS
Pin 9 RI
IN/OUT
O
O
I
I
--
O
I
O
O
Serial Cable
Female Connector
Multi-Tech Systems, Inc. MultiModem rCell User Guide 9
Chapter 2 – Activation and Installation
Chapter 2 – Activation and Installation
Account Activation for Wireless Devices
Please refer to the wireless account Activation Notice included with your unit and located on the MultiModem CD. Follow the directions on the Activation Notice to activate your account.
Note: If you need remote access to your MultiModem over the Internet for remote configuration, you need to ensure that your wireless network provider has provisioned mobile terminated data and fixed or dynamic public IP address in which they can configure the network to redirect any incoming connection to that predefined IP.
Insert the SIM Card into Holder, If required
The router requires the power supply connection to begin operation. It also requires a SIM card (Subscriber Identity Module) to operate on a GSM network. To install the SIM, do the following:
1. Using a small Phillips screwdriver, remove the two SIM door screws and remove the SIM door.
Note: When changing a SIM, ensure that power is removed from the unit.
10
2. Insert the SIM card into the card holder. The above graphic illustrates the correct SIM card orientation.
3. Verify that the SIM card fits into the holder properly and then replace the cover.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 2 – Activation and Installation
Making the Connection
1. Connect a suitable antenna to the SMA connector (see antenna specifications in Appendix B).
2. Using an Ethernet cable, connect one end of the cable to the ETHERNET connector on the back of the router and the other end to your pc either directly or via a switch or hub.
3. If you are connecting a customer’s serial legacy device to the router, connect the serial, RS-232 cable from the customer’s device to the RS232 connector on the back of the router.
4. Depending on the power source, connect either the power supply module with the appropriate blade or the optional DC power cable. If you are using the power supply module, remove the protective shipping cover. Attach the appropriate interchangeable blade piece to the power supply module.
5. Screw-on the power lead from the power supply module into the power connection on the router. Now, plug the power supply into your power source.
For Optional Direct DC Power
●
Screw-on the DC power cable to the power connector on the router.
●
Then attach the two wires at the other end of the DC power cable to a DC fuse/terminal block in which you are mounting the router.
●
Connect red wire to the "+" (positive) terminal and black wire to the "–" (negative) terminal. Be sure the GND connection is correct.
Warning: Over-voltage protection is provided on the device. To ensure complete protection, you may want to add additional filtering to the DC input.
Note:
For an application involving a battery: you can use permanent “+” or key-switched “+” source. Connect the power supply to its source (for example, in a mobile situation, to the DC fuse/terminal block).
Notes
● The
POWER LED . The POWER LED lights after power-up.
●
The Status LED is a solid ON when the router is booting up, saving a configuration, or updating firmware.
When the Status LED begins to blink, the router is ready.
● The
Reset Button . Pressing and holding the Reset button for 5 seconds will restore all factory default settings. It also will set the username and password back to admin and admin as well as setting the IP address to the default of 192.168.2.1.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 11
Chapter 2 – Activation and Installation
Optional – Attach the Router to a Flat Surface
Before you mount your router to a permanent surface, verify signal strength, refer to Verify Signal Strength in this Chapter.
The router can be panel mounted with screws spaced according to the measurement shown.
Note: Use either #6 or #8 pan head screws for all four mount locations.
12 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 2 – Activation and Installation
Set Your PC’s TCP/IP Address for Ethernet Functionality
The following directions establish a TCP/IP connection at the pc so the PC can communicate with the router. The following directions were written using a Windows XP/ 2003+ operating system.
1. Click Start | Control Panel. Double-click the Network Connections icon.
2. The Network Connections screen displays. Right-click the Local Area Connection icon and choose Properties from the drop down list.
3. The Local Area Connection Properties dialog box displays.
●
Select Internet Protocol [TCP/IP].
●
Click the Properties button. The Internet Protocol (TCP/IP) Properties screen displays.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 13
4. The Internet Protocol (TCP/IP) Properties screen.
Chapter 2 – Activation and Installation
14
Important Note:
If this screen opens and displays your current IP configuration, we suggest you record this information for future reference (i.e., after the router is configured, you may wish to return this PC to its original settings).
● To set a Fixed IP Address for the pc, select Use the following IP address.
●
Enter the pc IP Address. Example: 192.168.2.x.
Note : The x in the address stands for numbers 101 and up.
●
Enter the pc Subnet Mask. Example: 255.255.255.0
●
Enter the pc Default Gateway. Example: 192.168.2.1
Note: The pc settings must be in the same subnet range as the router.
The factory default settings for the router are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.2
●
Select Use the following DNS server addresses.
●
Enter the IP Address for the Preferred DNS Server. Example: 205.171.3.65
●
Click OK.
● Close the Local Area Properties screen by clicking OK.
●
Close the Control Panel.
●
Repeat these steps for each PC on your network.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 2 – Activation and Installation
AT Command for Verifying Signal Strength
To communicate directly with the cellular modem to verify signal strength, network registration, and roaming status, telnet to the modem.
Note: Ensure that the Status LED is blinking, indicating that the router is ready.
1. To Telnet to the modem. You can access the modem thru the Run icon or from the Command Prompt:
Click Start I Run icon. In the Open window, enter cmd and then press ENTER. or
Click Start I All Programs I Accessories I Command Prompt
● In the command window, type telnet 192.168.2.1 5000
● At the Login prompt, type the default user name: admin (all lower-case). Press ENTER
●
At the Password prompt, type the default password: admin (all lower-case). Press ENTER
2. In the command window, type AT+CSQ
3. The router responds with the received signal strength (rssi) and the channel bit error rate (ber).
RSSI ranges from 0 to 31. BER ranges from 0 to 7 (7 is the highest error rate).
10 – 31
0 – 9
99
Signal Strength – RSSI
Sufficient
Weak or Insufficient
Insufficient
AT Command for Checking Network Registration and Roaming
Status
Use this command to verify that the MultiModem rCell Router has been registered on a wireless network.
1.
In the command window, type AT+CREG?
2. The router will respond in one of the following ways:
Network Registration Verification
Value Network Registration Status
+CREG: 0,0 The router is not registered on any network
+CREG: 0,1 The router is registered on the home network
+CREG: 0,5 The router is registered on a network and it is roaming
Note: If the router indicates that it is not registered, verify the signal strength to determine if the problem is the strength of the received signal.
Exiting Modem Mode
1.
After the last AT Command is entered, press:
CTRL + ] (the right bracket).
2. The following prompt displays: telnet>
Type quit and press Enter.
3. Then the following prompt displays: c:>
Type exit and press Enter.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 15
Chapter 2 – Activation and Installation
Configure the Ethernet Interface Using the Web Management
Software
You are now ready to configure the Ethernet interface. This is accomplished by using the router's factory-installed Web
Management software. The software is accessed through a Web browser.
1. Open a Web browser
From the pc, open a Web browser.
Note: Ensure that the Status LED is blinking, indicating that the router is ready.
2. Type the default Gateway Address: http://192.168.2.1
3.
Login
After entering the Address, the Login screen displays.
● Type the default User Name: admin (all lower-case).
●
Type the default password: admin (all lower-case).
Note: The User name and Password are case-sensitive (both must be typed in lower-case).
A password can be up to 12 characters. If Windows displays the AutoComplete screen, you may want to click
No to tell the Windows OS not to remember the password; this helps maintain PC security.
Password Caution: It is recommended that you change the default password to better protect the security of your router. Use a safe password! Your first name spelled backwards is not a sufficiently safe password; a password such as xfT35$4 is better.
●
Click the Login button. The Web Management Home screen displays.
4. Use the Wizard Setup for Quick Configuration
A quick way to configure the router is to use the Wizard Setup. The Wizard Setup can be opened by clicking the words Wizard Setup located under the Web Management software’s menu bar. The information entered here will default to other screens that require this information.
Benefits of Using the Wizard Setup
●
Saves time by allowing you to configure the basic setup in one screen.
Note: Additional features and functions can be set up using the complete Web Management software program, described in Chapter 3.
●
Provides a short way to enter and save information needed to create a connection to the Internet.
Select Wizard Setup
16 Multi-Tech Systems, Inc. MultiModem rCell User Guide
5. After clicking the Wizard Setup selection, the Wizard Setup screen displays.
Chapter 2 – Activation and Installation
Wizard Setup
A minimum router configuration is provided using the Wizard Setup. This provides a quick way to enter and save information needed to create a connection to the Internet. The table below provides the information for the minimum configuration.
IP Address
Mask
DNS
IP Configuration
The default is 192.168.2.1. To change it, simply enter your own IP address.
The default is 255.255.255.0
Enter the primary DNS IP address for the system. The default is 0.0.0.0
PPP
PPP Configuration
The default is disable. To connect to the Internet, you need to enable PPP.
Depending on the model, commands may need to be issued to the integrated cellular modem before connecting to the wireless service. To issue commands to the integrated cellular modem, PPP must be disabled and telnet port 5000 used.
The default is disable. Dial-on-
Demand
Idle Time Out
Dial Number
APN
Init String
Sets the amount of time the PPP link stays active before disconnecting. Setting the value to zero causes the link to stay active continuously.
Enter the dial number. This number connects you to the Internet.
For HSDPA, the number is *99***1#.
For GSM models, enter the APN (Access Point Name). The APN is assigned by your wireless service provider.
For CDMA models, the APN does not apply
You can set up to 4 router initialization strings.
Authentication
Type
Username
Password
PPP Authentication
Click the button corresponding to the authentication protocol you want to use to negotiate with the remote peer. PAP, CHAP, or PAP-CHAP.
Default = PAP-CHAP
Enter the PPP Username. This name authenticates the remote peer.
Enter the PPP Password. This password authenticates the remote peer.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 17
Chapter 2 – Activation and Installation
A Note About the Access Point Name
The APN (Access Point Name) is assigned by your wireless service provider, but you may have to ask for it. An access point is an IP network to which a MultiModem rCell Router connects. The Web Management software asks for the APN on the Wizard Setup screen and the PPP screen.
Important Note About Provider Fees
Your provider will charge you for your data usage. Please check with your provider to make sure you are aware of the charges.
If you plan to use the router for large amounts of data transfers, Multi-Tech recommends an unlimited data plan with your account. Multi-Tech will not be responsible for any charges relating to your cellular bill.
Note: Additional features and functions can be set up using the complete Web Management software program, described in Chapter 3.
6. Click the Submit button.
7. Click the Save & Restart button (located on the Menu bar). The router will reboot
IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART
Click the Submit button located at the bottom of most screens in order to save any changes you make.
Then you click the Save & Restart button, located on the Menu bar, in order for your settings to take effect. Save & Restart does not have to be executed after each screen; you can change and Submit several screens, and then click Save & Restart.
8. The Status LED will go out during a ‘Save & Restart’. Once it is flashing, the unit is ready to go.
9. Open a Web browser, assume that all configurations are correct and the router’s CD LED is ON, you should now be able to browse the Internet.
Shutdown Caution
Never unplug the power until you have first performed the Save & Restart process. If the setup changes are not properly saved before unplugging the power, data could be lost.
18 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Chapter 3 – Using the Web Management
Software
The Web Management software configures the Ethernet functionality of your router.
Navigating the Web Management Software
This section explains the menu structure and the navigation buttons of the router’s Web Management software.
Menu Bar
IP Setup: Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration.
PPP: Sets up the PPP authentication, dial-on-demand, router authentication, and Wakeup on Call.
Networks & Services: Defines networks and services to make them available to other functions such as allowed packet filters, static routes, remote configuration, DNAT, and GRE tunnels and routes.
Packet Filters: Defines filter rules, DNAT configuration, and ICMP rules.
GRE Tunnels: Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through which traffic is to be routed.
DHCP Server: Configures the DHCP server settings.
IPSec: Allows device to support LAN-to-LAN VPN tunneling with DES, 3DES and AES encryption support
Serial Port: Adds support for RS-232 serial port so that Ethernet and legacy serial devices can share the same cellular connection.
Tools: Sets DDNS Force Update and Reset router, displays Service Status, and provides screens for Firmware Upgrade, Load
Configuration, and Save Configuration.
Statistics & Logs: Shows statistics and logs maintained by the router.
Save & Restart: Saves your settings and reboots your router.
Help Index: Accesses the online Help text.
IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART
Click the Submit button located at the bottom of most screens in order to save any changes you make.
Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take effect. Save &
Restart does not have to be executed after each screen; you can change and Submit several screens, and then click Save &
Restart.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 19
Chapter 3 – Using the Web Management Software
Screen Parts
Menu Bar Submenu Title Submenu List
Screen Buttons
Screen Name
Screen Input
Area
Screen Buttons
Home: Click this button to return to the Home screen.
Wizard Setup: Click this button to display the Wizard Setup screen on which you can quickly set up your MultiModem rCell Router with basic configuration settings.
Logout: Click this button to Logout and return to the login screen.
Help: Click this button to display the Help text.
Submenus
The submenus display on the left side of the screen.
The following table shows the sub-menu selections under each main menu category.
IP Setup PPP
General Configuration
HTTP Configuration
PPP Configuration
Wakeup on Call
DDNS Configuration
SNTP Configuration
Static Routes
Remote Configuration
Power On Config
Modem Commands
Networks &
Services
Network Configuration
Service Configuration
Packet Filters
Packet Filters
DNAT Configuration
Advanced
GRE
Tunnels
GRE Tunnels
GRE Routes
DHCP Server
Subnet Settings
Fixed Addresses
IPSec
Add IKE Connection
Add Manual Connection
Serial Port Tools
Serial Port Settings
Serial Port Configuration
Client Settings
TCP/UDP-Client Config- uration
Server Settings
TCP/UDP-Server Config- uration
Tools
Firmware Upgrade
Load Configuration
Save
Configuration
Statistics & Logs
Ethernet
PPP
PPP Trace
SysInfo
DHCP Statistics
GRE Statistics
Modem Info
Service Status
TCP/UDP Client Live Log
TCP/UDP Server Live Log
IPSec Live Log
IPSec Log Traces
20 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Web Management Software Screens
The rest of this chapter describes each of the Web Management software screens.
IP Setup
IP Setup > General Configuration
In the General Configuration, you will set the general system-based parameters.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 21
Chapter 3 – Using the Web Management Software
General Configuration
Date and Time: The system date and time display in these formats: MM/DD/YYYY / HH:MM:SS. A real time clock is part of
SNTP to display proper time.
IP Configuration
Enter the following addresses for the Ethernet interface.
IP Address (Default = 192.168.2.1), Mask (Default 255.255.255.0), Default Gateway (Default 0.0.0.0),
Primary DNS (Default 0.0.0.0), Secondary DNS (Default 0.0.0.0).
Note: See Appendix A – Table of Commonly Supported Subnets.
Auto Dial out Configuration
Auto Dialout: Check the box to enable/disable Auto Dialout. Default = Enable. The Auto Dialout settings allow you to use the integrated cellular modem directly with no router functionality. This is accomplished using redirector software on your pc. This software creates a virtual serial port allowing your pc to communicate with the integrated cellular modem over IP using telnet.
Raw Dialout: Check the box to enable/disable raw mode for an Auto Dialout session. Default = Disable.
Auto Dialout Login: Check the box to enable or disable Auto Dialout Login feature. Default = Enable. The Auto Dialout port is the telnet port used by the redirector software on your pc to communicate to the integrated cellular modem.
Auto Dialout Port: Enter the serial Auto Dialout Port number. Default = 5000.
Handle EIA Signal: Check the box to enable/disable the EIA standard signal characteristics (time and duration) used between different electronic devices.
Inactivity: Enter the time in seconds that the auto dialout session will stay active before going inactive.
Syslog Configuration
Syslog: Check the box to enable or disable Syslog. Default = Disable.
Syslog Server IP Address: If a Remote Syslog Server IP Address is specified, the syslog feature acts as a remote Syslog.
Auto Discovery
Auto Discovery: Check the box to enable or disable Auto Discovery to broadcast (MAC level), the MAC Address, IP Address, and DHCP information to the configured server port. Default = Enable. The router will send a broadcast packet on the specified server port every 10 seconds or whatever interval the broadcast timer is set to.
Server Port: Enter the Server Port Number. Default port is 1020.
Broadcast Timer: Enter the amount of time in seconds for the auto-discovery packet granularity of periodic broadcasting.
Default is 10 seconds.
Auto Reboot Timer Configuration
Auto Reboot Timer: Enter the number of hours to lapse between each automatic reboot. The default of zero deactivates the timer. Range is 0 to 999.
Telnet Configuration
Enables/Disables the Telnet port. The default is Enable. This is specifically for telnet port 23 for technical support debug. You can still access the integrated cellular modem using port 5000 when this is disabled.
Submit Button
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
22 Multi-Tech Systems, Inc. MultiModem rCell User Guide
IP Setup > HTTP Configuration
Chapter 3 – Using the Web Management Software
HTTP Configuration
HTTP Port: Enter the port number on which the HTTP server will listen for requests. Default is 80.
HTTP Time-0ut: Set the HTTP session in seconds. The default is 120 seconds.
Authentication
Username: Enter the Username that can access to the Web Management software. Default is admin. This username and password are also used for telnet access to the router and integrated cellular modem.
Password: Enter the Password for access to the Web Management software. Default is admin.
Note: You should change the password to one of your choosing. It can be up to100 characters. Use a safe password. Your first name spelled backwards is not a sufficiently safe password; a password such as xfT35$4 is better.
Submit Button
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 23
Chapter 3 – Using the Web Management Software
IP Setup > DDNS Configuration
DDNS (Dynamic Domain Naming System) allows you to have a static domain name with a dynamic IP address. Whenever your dynamic IP address changes, it is submitted to the DDNS server where your domain name is updated to point to the new IP address.
Note: You have to register with a DDNS server to use this feature.
General
DDNS: Check the Enable or Disable box. This enables/disables DDNS.
Default = Disable.
Use Check IP: Check the Enable or Disable box. If enabled, the program will query the server to determine the IP address before it performs the DDNS update (the IP address is still assigned by the wireless provider and the DDNS will be updated based on the address returned by Check IP
Server). If disabled, the program will perform the DDNS update using the IP address that it obtains from the PPP link. Default = Enable.
Check IP Server: Enter the Server name from which the currently assigned IP address is obtained. This check
IP server is a server the router accesses to check it’s current IP address.
Check IP Port:
Server:
Enter the port number of the Check IP Server. Default is 80.
Port:
Max Retries:
Enter the Server name to which the IP Address change is registered. Example:
members.dyndns.org
Enter the Server port number. Default is 80.
Enter the maximum number of tries that will be allowed if the update fails.
Default = 5. Range is 0 – 100.
Update Interval: Enter the intervals in days that will be allowed to pass when there is no IP Address change. At the end of this interval, the existing IP Address will be updated in the server so that it will not expire. Default = 28 days. Range is 1 – 99 days.
System:
Domain:
Sets the system registration type as either Dynamic or Custom. Default = Dynamic.
Enter the registered Domain name.
Authentication
Username:
Password:
Enter the Username that can access the DDNS Server. Default = NULL. You should have received your username when you registered with the DDNS service.
Enter the Password that can access the DDNS Server. Default = NULL. You should have received your password when you registered with the DDNS service.
Submit
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
24 Multi-Tech Systems, Inc. MultiModem rCell User Guide
IP Setup > SNTP Configuration
Chapter 3 – Using the Web Management Software
General Configuration
SNTP Client: Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set the local time. The default is Disable.
Server: Enter the SNTP server name or IP address to which the SNTP Client must contact in order to update the time. No default.
Polling Time: Enter the polling time at which the SNTP client requests the server to update the time. Default is 300 minutes. Time must be entered in minutes.
Time Zone Configuration
Time Zone: Enter your time zone. Default = UTC (Universal Coordination).
See the following Web site for Time Zone information: http://wwp.greenwichmeantime.com/info/current-time.htm
Time Zone Offset: Enter +/- hh:mm. Default = +00:00. Offset is the amount of time varying from the standard time of a
Time Zone.
Daylight Configuration
Daylight Saving: Enables/disables Daylight Saving mode. The default is Enable.
Daylight Saving Offset: Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the time in + / -
minutes.
Daylight Saving Start Time
Start Ordinal: Set the start ordinal to use during Daylight Saving mode. Options are first/second/third/fourth/last. Default is first. Daylight Saving time usually starts at the same time on the same day of the week in the same month every year. Each day of the week occurs four or five times a month. Therefore, you will be selecting the week in which daylight saving time starts: the first, second, third, fourth or the last of the month.
Start Month: Set the start month to use during Daylight Saving mode. Default is April.
Start Day: Set the start weekday to use during Daylight Saving mode. Default is Sunday.
Start Time: Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Multi-Tech Systems, Inc. MultiModem rCell User Guide 25
Chapter 3 – Using the Web Management Software
Daylight Saving End Time
End Ordinal: Set the end ordinal to use during Daylight Saving mode. Select the week in which daylight saving time ends.
Options are first/second/third/fourth/last. Default is last.
End Month: Set the end month to use during Daylight Saving mode. Default is October.
End Day: Set the end weekday to use during Daylight Saving mode. Default is Sunday.
End Time: Set the end time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Submit Button
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
IP Setup > Static Routes
Routing information is used by every computer connected to a network to identify whether it is sending a data packet directly to the firewall or passing it on to another network. The options to Delete or Edit a route after it has been defined and added are available by using the table at the bottom of the screen.
Add Static Routes
IP packets destined for the network indicated in the drop down box are routed to the IP address in the box pointed to by the arrow. The networks in the drop down box can be defined under the ‘Networks & Services’ tab.
Static Route: Select a static route from the drop down list box, and then click the Add button.
Add Button: After clicking the Add button, the new route is added and will display at the bottom of the screen.
Important Note: The Static Route screen will not display until the network is defined under Networks & Services.
IP Setup > Remote Configuration
Remote Configuration
Add Network/Host for Remote Configuration:
Select a network or host from the drop down box. You can define more network or host under the Network & Services tab.
The choices are Any, LAN, and WAN Interface. Choose all that apply. Click the Add button after each selection.
Add Button: After clicking the Add button, the network or host is added and displays at the bottom of the screen.
Delete: You will have the option to delete Any and WAN Interface in the Options window once it is added. Click on
Delete in the Options window.
26 Multi-Tech Systems, Inc. MultiModem rCell User Guide
PPP
PPP > PPP Configuration
Chapter 3 – Using the Web Management Software
NAT Configuration
NAT Enable/disable NAT (Network Address Translation). The default is Enable.
If NAT is enabled:
●
Your LAN can use one set of IP addresses for internal traffic and a second set of addresses for external traffic. In other words, the router with NAT does the simple IP routing between the LAN interface and the WAN interface. NAT hides the LAN address behind a single IP address on the wireless side.
●
Your internal addresses are shielded from the public Internet.
If NAT is disabled:
●
The router functions without performing any address translation on the packets passing through it.
●
Masquerading of packets originating from the LAN is disabled.
●
Address translation of packets arriving from the WAN is also disabled.
●
Any DNAT Configuration previously setup in the DNAT Configuration screen is disabled. This prevents the user from adding any DNAT rules, which if allowed would defeat the purpose of enabling Routing.
Note: For routing to take effect, the configuration must be saved after enabling it. It won’t be effective on the fly at runtime.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 27
Chapter 3 – Using the Web Management Software
PPP General
PPP
Dial-on-Demand:
Enable/disable PPP. The default is Disable. When enabled, the unit functions as a router. PPP must be disabled to access the integrated cellular modem directly using telnet port 5000. If
PPP is enabled, you cannot access the integrated cellular modem.
Enable/disable Dial-on-Demand. The default is Disable. If you disable it, the router will always stay connected unless the Idle Time Out expires. When Dial-on-Demand is enabled, use the
‘Wakeup on Call’ settings under the PPP menu to configure the settings for re-establishment of the connection.
Idle Time Out: Set the amount of idle time that will pass before the router will timeout. The default is 180 seconds. If the time expires, the PPP connection to the Internet will disconnect. Any IP packets from the LAN side or IP traffic from the wireless side will reset this timer and prevent the connection from dropping.
Connect Time Out: Set the number of seconds to wait for a connection while in receive mode before timing out.
Dialing Max Retries: Enter the number of dialing retries allowed. The default is zero, which means an infinite number is allowed. Range 0 to 100.
Authentication
Authentication Type: Set the authentication protocol type that will negotiate with the remote peer: pap/chap/papchap. Default is pap-chap.
Username:
Password:
Enter the Username with which the remote peer will authenticate. You can leave this field blank, if desired. Username is limited to 60 characters.
Enter the Password with which the remote peer will authenticate. You can leave this field blank, if desired. Password is limited to 60 characters.
ICMP Keep Alive Check
Keep Alive Check:
Keep Alive Type:
Host Name:
TCP Port:
Interval:
ICMP Count:
Enable/disable Keep Alive Check. The default is Disable. This is used to periodically check that the Internet connection is up. If it is not, the router will try to reconnect.
Select ICMP or TCP (the protocol type for Keep Alive).
Enter the Host Name or IP Address for Keep Alive Check. No default.
Enter the TCP Port number to connect with the TCP server.
Set the number of seconds for Keep Alive Check. Default is 60 seconds.
Set the number of ICMP Keep Alive Checks to be sent to the specified host. Default is 10.
Modem Configuration
(Refer to the Customer Activation Notices included with the product for proper information to enter).
Dial Number: Set the dial number to be dialed. Default is NULL.
Dial Prefix:
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
Set the modem dial prefix. The default is ATDT.
Connect String: Set the modem Connect String. The default is CONNECT.
APN:
Init String 1-4:
Enter the APN (Access Point Name). The APN is assigned by your wireless service provider.
Configure the modem init strings. You can set up to 4 modem initialization strings.
Submit Button
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
Note: The MTCBA-H-EN2 is shipped with command AT^SLED=1 entered at Init String 2. If the MTCBA-H-EN2 is set back to factory default using the pushbutton on the back of the chassis, this command will need to be reentered and saved as Init
String 2 for the LS LED to display properly.
28 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
PPP > Wakeup-on-Call
The Wakeup-on-Call feature allows the router to wake up and initiate a connection when there is an incoming call or LAN activity. If you desired some security with this feature, you can set up the router to wake up based on Caller ID or SMS instead of allowing all incoming calls to wakeup the router. Dial-on-Demand in the IP Setup menu must be enabled for these settings to have any affect. The Wakeup-on-Call feature will reduce the cost incurred when a router is online and available 24/7.
Note: When provisioning this feature, you must allow incoming calls, sms capability, and/or caller-id.
Wakeup-on-Call Configuration
Wakeup on Call: Enable/disable the Wakeup-on-Call feature. The default is Disable. Wakeup on Call occurs when a ring or caller ID is detected. This will trigger the router to reconnect after the ‘Time Delay’ expires.
Time Delay: Enter the amount of time that you want to pass between the reception of a call and the initiation of the Wakeup-on-Call connection. A time delay is needed to make sure that the incoming call has ended before the connection is initiated. The default is 10 seconds.
Dial-on-Demand from LAN: The default is disable. When enabled, the router will reconnect when it sees IP traffic on the LAN is needed to route. If this feature is disabled, Dial-on-Demand initiates a PPP connection to the Internet only from the WAN, not from the LAN.
Init Strings: Configure the router initialization strings. These init strings need to be specific to the integrated cellular modem. Some initialization may be required for the integrated cellular modem to accept
SMS for ‘Wakeup on Call’. Init-num can range from 1-5. The default is NULL. Refer to the following examples.
Submit: Click the SUBMIT button to save these settings.
Caller ID Configuration
Add “Wakeup on Call” Caller ID: To add Caller ID to the Wakeup-on-Call function, enter the Caller ID to be allowed to wakeup the router. Enter ‘Ring’ to wake up on any call.
Enter a CID phone number or an SMS message. The SMS message string must not contain any spaces between words.
After entering the Caller ID, click the Add button. The Caller ID displays at the bottom of screen.
You can enter any number of IDs you desire.
A Caller ID can be edited or deleted using Options, which will be available once a Caller ID is displayed.
Caller Acknowledgement Configuration
Acknowledgement String to Caller: The configured string of (0 to 40 characters) will be sent to the integrated cellular modem upon receiving a valid caller ID from the WAN. The default is NULL string.
Note: If the string is not configured, acknowledgement to the caller will not be sent upon successful caller ID reception.
Submit
Click the SUBMIT button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 29
Chapter 3 – Using the Web Management Software
PPP > Wakeup-On-Call Examples
Example 1 – Set Up the Ethernet Router to Activate on Incoming SMS Message
1. On the PPP > PPP Configuration screen, set up the following parameters:
PPP General
●
Make sure that PPP is Disabled (the default).
●
Make sure Dial-on-Demand is Disabled (the default).
●
Set the Idle Time Out to the number of seconds you desire.
Authentication
●
Your wireless service provider may require you to have a separate PPP Username and Password. If so, enter them here. Note: If a username and password are required, your wireless provider would have given them to you when you activated your account.
Modem Configuration
●
Make sure your Dial Number is entered correctly:
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
●
Enter your APN. The APN is assigned by your wireless service provider.
Example: AT+CGDCONT=1,"IP","Internet" The Example: AT+CGDCONT=1,”IP”,”Internet” needs to be removed.
Just the APN name needs to be entered in the APN field.
Submit
● Click the Submit button to save the changes made on this screen.
2. On the PPP > Wakeup-on-Call screen, set up the following parameters:
Wakeup-on-Call Configuration
●
Select Enable for Wakeup-on-Call.
●
Set the Time Delay. You can use the 10 second default.
● Enter the Init Strings so that the integrated cellular modem receives SMS.
Enter Wakeup Init String 1 as at+cmgf=1
Enter Wakeup Init String 2 as at+csms=1
Enter Wakeup Init String 3 as at+cnmi=2,2,0,0,1
Enter Wakeup Init String 4 as at^scfg=”URC/DstIfc”,mdm
●
Click the Submit button to save these settings.
Caller ID Configuration
●
Enter an SMS that you want added to the Caller ID list.
Note: Add the SMS message string into the Caller ID list. The SMS message string must not contain any spaces between words. When the configured string matches the SMS message string, it will activate the Wakeup-on-Call feature.
●
Add Button
Click the Add button to save each message as it is entered into the Caller ID list.
Caller Acknowledgement Configuration
●
Enter a configured string (0 to 40 characters) that will be sent to the integrated cellular modem upon receiving a valid Caller ID from the WAN.
Set the Wakeup Acknowledgement string configuration with the command at+cnma
●
Click the Submit button to save the Acknowledgement Configuration.
You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.
Example 2 – Determine if the router Is Supporting Incoming Calls and Caller ID
1. On the PPP > PPP Configuration screen, make sure that PPP is Disabled.
2. On the PPP > Wakeup-on-Call screen, make sure that Wakeup-on-Call is Disabled.
3. Open a command prompt by clicking the Start button and selecting Run.
4. Type CMD to open the command window. Click OK.
5. When the command window opens, type Telnet 192.168.2.1 5000. This is the IP address of the router.
Note: 5000 is the port number.
5.1.
Enter your username and password to login.
5.2.
Enter an AT command to make sure you receive a response; i.e., OK.
5.3.
Enter the Command AT+CNUM to determine the dial number of your router.
6. From another phone, call your router using the number identified in Step 5.3. This will let you know if the RING message shows.
7. To enable Caller ID, enter the AT+CLIP=1 command on the command screen and make the call again to see if it shows Caller ID information.
Notes:
●
Step 5.3 must show the RING or CALLER ID information in order for the Wakeup-on-Call function to work.
●
Some wireless providers might not provide caller ID information if you have only a data plan.
30 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Example 3 – Set Up the Ethernet Router to Activate on ALL Incoming Calls
1. On the PPP >PPP Configuration screen, set up the following parameters:
PPP General
●
Make sure that PPP is Enabled.
●
Make sure Dial-on-Demand is Enabled.
●
Set the Idle Time Out to the number of seconds you desire.
Authentication
●
Your wireless service provider may require you to have a separate PPP Use name and Password. If so, enter them here.
Note: If a username and password are required, your wireless provider would have given them to you when you activated your account.
Modem Configuration
●
Make sure your Dial Number is entered correctly:
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
Submit
●
Click the Submit button to save the changes made on this screen.
2. On the PPP > Wakeup-on-Call screen, set up the following parameters:
Wakeup-on-Call Configuration
●
Select Enable for Wakeup-on-Call.
●
Set the Time Delay to 3 seconds. You can use the 10 second default.
●
All Init Strings should be empty.
●
Submit Button
Click the Submit button to save these settings.
Caller ID Configuration
●
Enter the string RING to the Caller ID list.
●
Click the Add Button to save the string to the Caller ID list.
3. Save and Restart
Click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.
Example 4 – Set Up the Ethernet Router to Activate on Matching Caller IDs Only:
1. On the PPP > PPP Configuration screen, set up the following parameters:
PPP General
●
Make sure that PPP is Enabled.
●
Make sure Dial-on-Demand is Enabled.
●
Set the Idle Time Out to the number of seconds you desire.
Authentication
●
Your wireless service provider may require you to have a separate PPP username and password. If so, enter them here.
Note: If a username and password are required, your wireless provider would have given them to you when you activated your account.
Modem Configuration
●
Make sure your Dial Number is entered correctly:
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
Submit
●
Click the Submit button to save the changes made on this screen.
2. On the PPP > Wakeup-on-Call screen, set up the following parameters:
Wakeup-on-Call Configuration
●
Select Enable for Wakeup-on-Call.
●
Set the Time Delay. You can use the 10 second default.
●
Enter the Init Strings:
Set Wakeup Init String 1 by entering AT+CLIP=1
●
Submit Button
Click the Submit button to save these settings.
Caller ID Configuration
●
Enter a caller’s ID that you want added to the Caller ID list.
●
Add Button
Click the Add button to save each Caller ID as it is entered to the Caller ID list.
3. Save and Restart
Click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 31
Chapter 3 – Using the Web Management Software
PPP > Power-On Configuration
The Power-On Configuration feature allows you to set an initialization string that will be sent to the router upon boot up.
Power-On Init String Configuration
Power-On Init String: You can enter a string of 0 to 40 characters that will be sent to the router upon boot up. All commands will initialize before you proceed with regular PPP related activity.
Note: When no initialization string is configured, regular functionality of the router is retained.
Submit: Click the SUBMIT button to save this setting.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
PPP > Modem Commands
Setting up certain modem commands will allow an external application to query modem information (based on the commands entered). The application can use the URL HTTP://192.168.2.1/modeminfor.html
to get the IP address that is currently assigned to the integrated cellular modem after the PPP connection is established. It also will show the results of up to ten AT commands entered here.
32
Modem AT Commands Configuration
These commands will be sent every time a PPP connection to the network is initiated.
Example of Useful HSDPA AT Commands:
AT+CGSN
AT+CGMR
Product Serial Number
Software Version
AT+CNUM
AT+COPS?
AT+CREG?
Wireless Subscriber Number
Network Information (Operator)
Network Registration
AT+CSQ Signal Quality
Notes:
● You can also retrieve the integrated cellular modem information without using a browser:
Make a TCP connection to port 80 (same as the Web Admin port) and send data as:
GET /atinfor.html HTTP/1.1
Then press Enter twice.
●
Refer to the AT Command Reference Guides on the product CD for other commands.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Networks & Services
Networks & Services > Network Configuration
Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added are available by using the table at the bottom of the screen.
Network Configuration
Enter the Name, IP Address, and Mask for a new Network or Host.
Notes:
●
A Network/Host Name cannot be edited.
●
A Network/Host cannot be deleted if it is used in another configuration.
●
Network/Host changes are reflected in all the configurations in the Web Management software where they are used.
● A Network/Host added here will be displayed in the following sections: Static Routes, DNAT, and Packet Filters.
Name:
IP Address:
Subnet Mask:
Add Button:
Enter the name of the Network/Host. The same address-mask pair should not already be present in the displayed list. The Name is limited to 15 characters maximum.
Enter the IP Address of the Network/Host. The same address-mask pair should not already be present in the displayed list.
Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered as 32.
Note: See Appendix A -- Table of Commonly Supported Subnets.
Click the Add button. The defined network is added and will display at the bottom of the screen.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 33
Chapter 3 – Using the Web Management Software
Networks & Services > Service Configuration
On this screen you can specify the standard set of well known services available on the system. These services enable the configuration of the user-defined services. The options to Delete or Edit a service after it has been defined and added are available by using the table at the bottom of the screen.
34
Service Configuration
Enter the Name, Protocol, Source Port/Client, and Destination Port/Server for the new Service.
●
A Service Name cannot be edited.
●
A Service cannot be deleted if it is used in another configuration.
●
Service changes are reflected in all the configurations in the Web Management software where they are used.
● Services added here will be displayed in the following sections: DNAT, Packet Filters.
Name:
Protocol:
Source Port:
Enter the name of the Service which is limited to 16 characters. It has to be unique.
Enter the type of protocol (TCP, UDP).
Enter the Destination Port for this service. The source and destination ports can be entered either as a single port or a range using a colon as the separator.
Destination Port: Enter the name of the Destination Port for the service.
Add Button: Click the Add button. The new service is added and will display on the screen. Packet Filters
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Packet Filters > Packet Filters
You can Delete or Edit a packet filter rule after it has been defined and added by using the table at the bottom of the screen.
Packet Filter
From (Host/Networks): Enter the network/host from which the packet must originate for the filter rule to match. The
Any option, which matches all IP addresses regardless of whether they are officially assigned addresses or private addresses, may also be entered. The network/host must be pre-defined in the
Networks section.
Service:
To (Host/Networks): Enter the network/host to which the packet must send for the filter rule to match. The Any option, which matches all IP addresses regardless of whether they are officially assigned addresses or private addresses, may also be entered. The network/host must be pre-defined in the Networks section.
Action:
Enter the service that is to be matched with the filter rule. These services must be pre-defined in the Services section. These services precisely define the traffic to be filtered.
Enter the action that the packet filter executes if the rule matches any traffic traversing the firewall.
Types of actions defined are:
Accept: Allows/accepts all packets that match this rule.
Reject: Blocks all packets that match this rule. The host sending the packet will be informed that the packet has been rejected.
Drop: Blocks all packets that match this rule, but the host is not informed; i.e., this is a silent drop.
Log: Packets matching the rule; i.e., the corresponding source address, destination address, and service will be logged.
Add Button: Click the Add button. The defined packet filter rule is added and will display at the bottom of the screen.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 35
Chapter 3 – Using the Web Management Software
61BPacket Filters > DNAT Configuration
Destination Network Address Translation (DNAT) is a process that allows the placing of servers within the protected network and making them available for a certain service to the outside world. The DNAT process running on the router translates the destination address of incoming packets to the address of the real network server on the LAN. The packets are then forwarded.
You can Delete or Edit a DNAT rule after it has been defined and added by using the table at the bottom of the screen.
I mportant Note: When adding rules, at least one host must be defined in the Network Configuration section.
DNAT Configuration
Allow Access: Select a network or host to which IP packets will be allowed and re-routed. The network/host must be pre-defined in the Network Configuration section.
External Service: Select the External Service that you want allowed. The service must be defined in the Service
Configuration section.
LAN IP: Select the LAN IP to which the packets are to be diverted. Only one host can be defined as the destination.
Internal Service:
Internal Source:
Save Button:
Select the Internal Service to be the destination.
Select the source address for packets that going to be sent. If you do not want to change the address, select NOCHANGE.
Click the Save button. The defined DNAT configuration is added and will display at the bottom of the screen. Entries can be deleted or edited by clicking the Edit or the Delete buttons.
Packet Filters > DNAT Example
Set Up DNAT and Port Forwarding to an Internal Device
Note: The internal device can be camera, meter, security device, etc.
Situation: Assume the device is on a LAN with an IP address of 192.168.2.100 and the port to access the device is port
7700.
1. On the Network & Services > Network Configuration screen, set up the following parameters:
Name – Enter a name for the LAN device.
IP Address and Subnet Address – Enter the IP address and subnet address of the device.
Example: Name = MeterIP
IP Address = 192.168.2.100
Subnet Address = 255.255.255.255. The subnet mask in the network configuration is not defined using x.x.x.x notation. It uses ‘bit’ notation. So 255.255.255.255 = 32.
Add – Click the Add button to save this configuration.
2. On the Network & Services > Service Configuration screen, define a service name. For this example, the service will be a meter.
Name – Enter a name for the service (use a name that will identify the service for you).
Example: MeterPort
Protocol – Select a protocol.
Example: tcp/udp
S-Port / Client – Enter the source port for this service.
Example: 1:65535
D-Port / Server – Enter the destination port for this service.
Example: 7700
Add – Click the Add button to save this configuration.
36 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
3. On the Packet Filters > DNAT Configuration screen, define the DNAT rule.
Allow Access – Select the original target network/host of the IP packets that you now want rerouted. The original target network/host is the one previously defined in the Network Configuration section.
Example: Any
External Service – Select the External Service that you want allowed. The service must be defined in the
Service Configuration section.
LAN IP – Select the LAN IP to which the packets are to be diverted. Only one host can be defines as the destination.
Internal Service – Select the Internal Service to be the destination.
Pre DNAT Service – Select the service for the Pre-DNAT destination. This service was just defined in the
Service Configuration section.
Example: MeterPort
Post DNAT IP – Select the destination to which the IP packets are to be diverted. Only one host can be defined as the Post DNAT destination.
Example: MeterIP
Post DNAT Service – Select the service for the Post DNAT configuration.
Example: MeterPort
Internal Source – Select the source address for packets that going to be sent. If you do not want to change the address, select NOCHANGE.
Example: NOCHANGE
4. Save – Click the Save button to save this configuration.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 37
Chapter 3 – Using the Web Management Software
63BPacket Filters > Advanced
Connection Tracking
H323: Enable/disable the forwarding of H323 packets across the firewall.
PPTP: Enable/disable PPTP Packet Pass-through (PPTP NAT support).
ICMP Configuration
The Internet Control Message Protocol (ICMP) is used to test the network connections and the functionality of the firewall and is also used for diagnostic purposes. ICMP on Firewall and ICMP Forwarding always apply to all IP addresses; i.e.,
Any. When these are enabled, all IP hosts can Ping the firewall (ICMP on Firewall) or the network behind it (ICMP
Forwarding).
ICMP on LAN: Enable/disable the transfer of ICMP packets on the LAN interface.
ICMP on WAN:
ICMP Forward:
Enable/disable the transfer of ICMP packets on the WAN interface.
Enable/disable the forwarding of ICMP packets through the firewall into the local network.
Submit
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
38 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
GRE Tunnels
GRE tunneling and GRE routing together are referred to Generic Routing Encapsulation (GRE). GRE Routing is an integral part of GRE tunneling. First, the GRE Tunnels are created using the GRE Tunnel Configuration. Then the routes for the remote networks that are to be routed through a tunnel need to be specified in the GRE Routes Configuration. Thus, all the traffic destined to remote networks associated to a tunnel will get routed through that tunnel.
64BGRE Tunnels > GRE Tunnels
Tunneling allows the use of a public network to convey data on behalf of two remote private networks. It is also a way to transform data frames to allow them to pass networks with incompatible address spaces or even incompatible protocols. If you want to read more about how this works, see the online Help.
GRE Tunnel Configuration
Tunnel Name: Enter a name for the new tunnel.
Local IP:
Note:
Select the local interface on which the tunnel is being created. Eventually, the packets destined for this tunnel will be routed through it.
When adding a tunnel, use only one of the following: Remote IP or FQDN.
Remote IP: Select the Remote IP address that marks the other end point of the tunnel (this is the one to which the routed packets will be received).
OR
FQDN: Enter the FQDN (Fully Qualified Domain Name) for the Remote IP, which can be either the IP
Address of an FQDN.
Add Button: Click the Add button. The defined GRE tunnel configuration is added and will display at the bottom of the screen.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 39
Chapter 3 – Using the Web Management Software
65BGRE Tunnels > GRE Routes Configuration
GRE Routes Configuration
Remote Network: Select the remote network for which the traffic destined to it must be routed through the given tunnel.
Tunnel Name: Select the name of the tunnel through which the traffic will be routed.
Note: To add a tunneled route, the remote network and the tunnel must have been defined in Network
Configuration. The tunnel configuration must be completed before setting the GRE route configuration.
Add Button: Click the Add button. The defined GRE route configuration is added and will display at the bottom of the screen.
40 Multi-Tech Systems, Inc. MultiModem rCell User Guide
DHCP Server
66BDHCP Server > Subnet Settings
Chapter 3 – Using the Web Management Software
General Configuration
DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get their own network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP server. The overall purpose of DHCP is to make it easier to administer a large network.
DHCP:
Subnet:
Mask:
Gateway:
DNS:
Lease Time:
Submit
Enable/disable the DHCP server.
Enter the subnet address. If you want to change the DHCP subnet address, you first have to delete all the subnet settings below.
Enter the subnet mask.
Enter the gateway address.
Enter the DNS address.
Select the DHCP Lease Time from the selection box. Lease time is set in days, hours, and minutes. A Lease Time of 00-00-00 is an Infinite Lease Time.
Click the Submit button to save these settings.
Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
Subnet Settings
From-To Range:
Add:
Note:
Enter the range of IP addresses to be assigned by DHCP.
Click the Add button. The address range is added and will display in the table at the bottom of the screen. Once the range displays, you can delete if necessary.
See Appendix A – A Table of Commonly Supported Subnets.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 41
Chapter 3 – Using the Web Management Software
67BDHCP Server > Fixed Addresses
DHCP Fixed Configuration
The DHCP server can be made to assign a fixed IP address for a particular user by identifying the MAC address. This binding can be made permanent by configuring it here. The same IP address will not be used for any DHCP client with a different MAC address, even if there is no active DHCP connection with that IP address.
MAC Address: Enter the MAC address to which the specified IP address binds.
IP Address: Enter the fixed IP address to be assigned.
Add: Click the Add button. The addresses are added and will display in the table at the bottom of the screen from where they can be deleted or changed.
42 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
IPSec
The IPSec (IP Security) protocol suite, based on modern cryptographic technologies, provides security services like encryption and authentication at the IP network layer. It secures the whole network traffic providing guaranteed security for any application using the network. It can be used to create private secured tunnels between two hosts, two security gateways, or a host and a security gateway. Up to four tunnels can be active at any given time. Beyond four active tunnels can be saved, but they will not be active.
IPSec provides encryption and authentication services at the IP level of the protocol stack. IPSec can protect any traffic carried over IP.
IPSec provides the following services:
●
Authentication only
●
Encryption only
●
Authentication and encryption
Transmitting and receiving data securely over an unprotected network involves deciding on the type of IPSec service, as mentioned above, required for the connection, establishing a secure connection by a key exchange process and transferring data using that connection.
The key exchange process is done in one of two ways:
1. Manual Keying where the authentication and encryption keys are provided manually on both sides of the connection.
2. Auto Keying using IKEv2 Protocol where the authentication and encryption keys are generated on either side of the connection and exchanged by different methods.
68BIPSec > IPSec
IPSec
VPN Status
Add a New Connection
Add IKE Connection
Check the VPN Status checkbox to enable IPSec. Click the Save button.
Click the Add IKE Connection button. A screen displays for setting up an IKE connection.
Add Manual Connection Click the Add Manual Connection button. A separate screen displays for setting up a manual connection.
Important Note About Activating a Connection: Once connection information is entered, it will display at the bottom of this screen. Be sure to check the box in the Status column to activate the connection.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 43
Chapter 3 – Using the Web Management Software
Add IKE Connection
44
Add an IKE Connection
Connection Name
Compression
Enter a text name that will identify the connection for you.
Check the compression checkbox to enable IPCOMP, the compression algorithm.
Perfect Forward Secrecy (PFS) Check the PFS checkbox to enable PFS, a concept in which the newly generated keys are unrelated to the older keys). This is enabled by default.
Authentication Method Authentication can be done using Pre-Shared Secrets.
Pre-Shared Key
Select Encryption
IKE Life Time
The Pre-Shared Key must be agreed upon and shared by the VPN endpoints; it must be configured at both endpoints of the tunnel.
negotiation to expiration. The default value is one hour and the maximum is 8 hours.
Select the encryption method. 3DES is recommended. Options include:
3DES, AES-128, AES-192, AES-256
The duration for which the ISAKMP SA should last is from successful
Key Life
Number of Retries
Local WAN IP
Local LAN
The duration for which the IPSec SA should last is from successful negotiation to expiration. The default value is one hour and the maximum is
24 hours.
retries.
Specify the number of retries for the IPSec tunnel. Enter zero for unlimited
This is the interface initiating the IPSec tunnel.
Internal subnet of the local security gateway for which the security services should be provided. If the RouteFinder acts as a host, this should be configured as None.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Remote Gateway IP
FQDN
Remote LAN
UID (Unique Identifier String)
NetBIOS Broadcast
Save Button
Click the Save button to save these settings.
Interface where the IPSec tunnel ends. In the case of a Road Warrior with a
Dynamic IP address, this should be configured to ANY.
FQDN is a DNS resolvable fully qualified domain name with which identity the right peer can be identified. When FQDN is selected, the Remote
Gateway IP should be blank.
Internal subnet of the remote security gateway for which the security services should be provided. If the remote end is the host, this should be configured as None.
Check the UID box to enable the Local ID and Remote ID. Local ID and
Remote ID are active only when UID is enabled.
Local ID
Enter a string identifier for the local security gateway.
Remote ID
Enter a string identifier for the remote security gateway.
Check this option to enable broadcasts over the connection. It will allow computers on the network to share Microsoft file and printer sharing information.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 45
Chapter 3 – Using the Web Management Software
71BAdd Manual Connection
72BAdd Manual Connection
Connection Name
Compression
Enter a text name that will identify the connection for you.
Check the compression checkbox to enable IPCOMP, the compression algorithm.
Authentication Method Select the authentication algorithms to be used for the respective security services.
Authentication Key
Options are: MD5-96 and SHA1-96.
The VPN firewall could use either MD5-96 or SHA1-96 for authentication. For example,
MD5-96 could have a key of abcdefgh12345678.
Encryption Method
Encryption Key
SPI Base
Authentication
Protocol
SHA1-96
MD5-96
Key Length Accepted Characters
Must be 20 characters Alphanumeric characters
Must be 16 characters Alphanumeric characters
Select the encryption method. Options include: 3DES, AES- 128, AES-192, AES- 256, and
NULL (no encryption).
The RouteFinder can use any one of the methods specified in its encryption algorithm. For
example 3DES uses 24 alphanumeric characters (192 bits) as its encryption key.
Example: 1234567890abcdefabcdabcd
Encryption
Protocol
Key Length Accepted Characters
Null Must be 24 characters Alphanumeric Characters
3DES
AES-128
AES-192
Must be 24 characters
Must be 16 characters
Must be 24 characters
Alphanumeric Characters
Alphanumeric Characters
Alphanumeric Characters
AES-256 Must be 32 characters Alphanumeric Characters
The Security Parameter Index identifies a manual connection. The SPI is a unique identifier in the SA (Secure Association – a type of secure connection) that allows the receiving computer to select the SA under which a packet will be processed. The SPI Base
46 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Left Next Hop
Local WAN IP
Local LAN
Remote Gateway IP
FQDN
Remote LAN
NetBIOS Broadcast
Save Button
Click the Save button to save these settings. is a number needed by the manual keying code. Enter any 3-digit hexadecimal number, which is unique for a security association. It should be in the form 0xhex (0x100 through
0xfff is recommended). If you have more than one manual connection, then the SPI Base
must be different for each one.
Next Hop is the address of the next device in a routing table’s path that moves a packet to it’s destination. This setting can be configured or left as a static value: 0.0.0.0. When not configured, the value is set to the Gateway of the Box/Gateway configured on the
Interface/Right IP. The selection is based on the Left and Right IP.
Select the Interface to initiate the IPSec tunnel (Left Security Gateway).
Select the internal subnet of the local security gateway for which the security services are to be provided. If the RouteFinder acts as a host, this should be configured as None. Other options are: Any, LAN, LAN Interface, WAN 1, WAN 1 Interface.
Select the interface in which the IPSec tunnel ends. In the case of Road Warriors with a
Dynamic IP addresses, this should be configured as ANY. Other options include: LAN,
LAN Interface, WAN 1, WAN 1 Interface, and None.
FQDN is a DNS resolvable fully qualified domain name with which identity the right peer can be identified. When FQDN is entered, the Remote Gateway IP should be blank.
This is the internal subnet of the remote security gateway for which the security services are to be provided. If the remote end is a host, this should be configured as None.
Check this option to enable broadcasts over the connection. It will allow computers on the network to share Microsoft file and printer sharing information.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 47
Chapter 3 – Using the Web Management Software
Serial-Port
Serial-Port > Serial Port Settings
Serial-Port Configuration
Serial-Port Configuration allows for the configuration of the serial terminal connected to the RS-232 connector DE9 on the back of the unit.
Baud Rate: Sets the baud-rate at which the serial terminal will be communicating. The default is 115200.
Flow Control: Sets the flow control for the serial port. The selections are None or RTS-CTS. The default is None.
Data Bits: Sets the data bits for the serial port. Data bit selection is 7 or 8. The default is 8.
Stop Bits:
Parity:
Sets the stop bits for the serial port. The selections are 1 or 2. The default is 1.
Sets the parity for the serial port. The selections are None, Even, or Odd. The default is None.
Buffer Length: Sets the length up to which the data from the serial device is buffered before IP transmission. The default length is 32-characters.
Timeout: Sets the timeout value for the serial terminal of how long it should wait before IP transmission, The default is 1-second.
Submit Button
Click the Submit button to save these settings.
48 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Serial Port > Client Settings
The TCP/UDP client feature enables the router to act as a proxy TCP/UDP client to the serial terminal connected to the DE9,
RS232 port on the router thus facilitating the serial terminal to access any TCP/UDP server on the LAN/WAN. Once the session, serial terminal to TCP/UDP server, is opened successfully, it allows two-way traffic between the serial device and the remote server.
Initial connection setup for the TCP/UDP client is as shown below:
TCP/UDP
Server
LAN / WAN
Router hardware
TCP/UDP
Client
HyperTerminal /
Minicom
DE9
Connector
Serial
Device
TCP/UDP – Client Configuration
Configures TCP/UDP Client through which the serial terminal connected to the RS-232 connector, DE9 on the back of the unit communicates with the remote TCP/UDP server on the LAN/WAN.
Status:
Client Type:
Primary Server:
Secondary Server:
Sets the client status to either Enable or Disable. The default is Disable
Sets the client to either TCP or UDP. The default is TCP.
Enter the Primary Server IP address or Hostname. The default is blank.
Enter the Secondary Server IP address or Hostname. The default is blank.
Connection start By: Sets the trigger in the serial port by which the connection starts. The default is Carriage
Return (CR).
Connection Terminate By: Sets the connection terminate sequence as follows:
Escape Sequence: Set the escape sequence characters at which the connection should terminate.
Inactivity timeout:
Others:
Set the inactivity timeout at which the connection should terminate.
The other terminating sequences are: DTR-toggle or Always-On.
DTR-toggle: If DTR status goes low, the connection terminates.
Always-On: Sets the terminate sequence as Always-on.
Submit Button
Click the Submit button to save these settings.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 49
Chapter 3 – Using the Web Management Software
Serial Port > Server Settings
This feature enables a TCP/UDP client on the Ethernet network to connect to the remote serial terminal connected to the DE9,
RS232 port on the router. The router acts as a TCP/UDP server which allows two way traffic between the TCP/UDP client and the remote terminal on the serial port.
The initial connection setup for the TCP/UDP server is as shown below.
Router hardware
TCP/UDP
Client
LAN / WAN
TCP/UDP
Server
HyperTerminal /
DE9
Connector
Minicom
Serial
Device
TCP/UDP – Server Configuration
Configures TCP/UDP Server through which the serial terminal connected to the RS-232 connector, DE9 on the back of the unit listens for the remote TCP/UDP client to communicate on the LAN/WAN.
Status:
Server Type:
Sets the client status to either Enable or Disable. The default is Disable
Sets the client to either TCP or UDP. The default is TCP.
Port: Sets the server port. The default is None
Connection Terminate By: Sets the connection terminate sequence as follows:
Escape Sequence: Set the escape sequence characters at which the connection should terminate.
Inactivity timeout:
Others:
Set the inactivity timeout at which the connection should terminate.
The other terminating sequences are: DTR-toggle or Always-On.
DTR-toggle: If DTR status goes low, the connection terminates.
Always-On: Sets the terminate sequence as Always-on.
Submit Button
Click the Submit button to save these settings.
50 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
Tools
Tools > Tools
DDNS
DDNS Force Update: Click the Update button to update the DDNS server with your current dynamically assigned IP
DDNS Status:
address.
Click the Refresh button to display the DDNS Status after a forced update.
Modem
Reset Modem: Click the Reset button to reset the integrated cellular modem.
Tools > Firmware Upgrade
Firmware Upgrade
The firmware for the router can be upgraded to the latest version using this feature. All Multi-Tech firmware upgrades are posted on the Multi-Tech Web site from which they can be downloaded.
Note: Before you upgrade your firmware, you should save your present configuration. After the firmware upgrade is complete, you should verify your configuration to ensure that it is as expected. Particularly, check that the DHCP scope settings are set properly.
Browse File for Upgrade: Click the Browse button and locate the latest firmware version to be downloaded. Select the
mtcba-en2-u-xxx.bin file. Highlight the file name and press Enter so that the file name displays in the text box. Make sure you select the correct BIN file; otherwise, your router can become inoperable. Then click the Upgrade button.
When upgrade is completed, the program will return to the main login screen.
Important Notes:
●
The new firmware is written into the flash.
●
A Firmware Upgrade will take at least 4 minutes while the firmware is downloaded. Do not cycle power during this time.
●
DO NOT perform firmware upgrade remotely via the Cellular wireless connection.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 51
Chapter 3 – Using the Web Management Software
Tools > Load Configuration
Load Configuration
Browse File for Load Configuration: Click the Browse button to open the file that allows you to locate the configuration file. When found, highlight the file name and press Enter so that the file name displays in the text box. Then click the Load button.
Important Notes:
●
The new configuration is written into the flash.
●
A Configuration Upgrade will take at least 3 seconds to download and 60 seconds to install the settings and reboot. Reboot happens automatically.
When you click the Load button, the following screen displays. It shows the name of the file you selected.
Click the Find, Save, or Cancel buttons as desired. The More Info displays Microsoft’s Internet Explorer Help on downloading files.
Tools > Save Configuration
Click this option to save the configuration.
52 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Statistics & Logs
80BStatistics & Logs > System Information
Chapter 3 – Using the Web Management Software
This is an example of the Statistics & Logs System Information
Multi-Tech Systems, Inc. MultiModem rCell User Guide 53
Chapter 3 – Using the Web Management Software
81BStatistics & Logs > Ethernet
This is an example of the Ethernet Statistics & Logs screen. It shows Ethernet statistics.
54 Multi-Tech Systems, Inc. MultiModem rCell User Guide
82BStatistics & Logs > PPP
Chapter 3 – Using the Web Management Software
This is an example of the PPP Statistics & Logs screen. It shows PPP statistics when PPP is enabled.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 55
Chapter 3 – Using the Web Management Software
83BStatistics & Logs > PPP Trace
This is an example of the PPP Trace Statistics & Logs screen. It shows the PPP trace messages.
Statistics & Logs > DHCP Statistics
This is an example of the DHCP Statistics & Logs screen. It shows the statistics of DHCP leases.
Statistics & Logs > GRE Statistics
This screen displays the statistics of active tunnels.
56 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
86BStatistics & Logs > Modem Information
This screen displays the modem commands set on the PPP > Modem Commands screen and also displays the results of the commands.
87BStatistics & Logs > Service Status
88BStatistics & Logs > TCP/UDP Client Live Log
This screen displays the TCP/UDP Client Live Log.
89BStatistics & Logs > TCP/UDP Server Live Log
This screen displays the TCP/UDP Server Live Log.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 57
Chapter 3 – Using the Web Management Software
90BStatistics & Logs > IPSec Live Log
This screen displays the IPSec Live Log.
91BStatistics & Logs > IPSec Log Traces
This screen displays the IPSec Log Traces.
58 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Appendix A – Commonly Supported Subnets
Appendix A – A Reference Table of
Commonly Supported Subnets
255.255.255.192
/26
255.255.255.224
/27
255.255.255.240
/28
255.255.255.248
/29
This table lists commonly supported Subnets organized by Address.
255.255.255.128
/25
N.N.N.72
N.N.N.80
N.N.N.88
N.N.N.96
N.N.N.104
N.N.N.112
N.N.N.120
N.N.N.128
N.N.N.136
N.N.N.144
N.N.N.152
N.N.N.160
N.N.N.168
N.N.N.176
N.N.N.184
N.N.N.192
N.N.N.200
N.N.N.208
N.N.N.216
N.N.N.224
Network Number
N.N.N.0
N.N.N.128
Network Number
N.N.N.0
N.N.N.64
N.N.N.128
N.N.N.192
Network Number
N.N.N.0
N.N.N.32
N.N.N.64
N.N.N.96
N.N.N.128
N.N.N.160
N.N.N.192
N.N.N.224
Network Number
N.N.N.0
N.N.N.16
N.N.N.32
N.N.N.48
N.N.N.64
N.N.N.80
N.N.N.96
N.N.N.112
N.N.N.128
N.N.N.144
N.N.N.160
N.N.N.176
N.N.N.192
N.N.N.208
N.N.N.224
N.N.N.240
Network Number
N.N.N.0
N.N.N.8
N.N.N.16
N.N.N.24
N.N.N.32
N.N.N.40
N.N.N.48
N.N.N.56
N.N.N.64
Hosts Available
N.N.N.1-126
N.N.N.129-254
Hosts Available
N.N.N.1-62
N.N.N.65-126
N.N.N.129-190
N.N.N.193-254
Hosts Available
N.N.N.1-30
N.N.N.33-62
N.N.N.65-94
N.N.N.97-126
N.N.N.129-158
N.N.N.161-190
N.N.N.193-222
N.N.N.225-254
Hosts Available
N.N.N.1-14
N.N.N.17-30
N.N.N.33-46
N.N.N.49-62
N.N.N.65-78
N.N.N.81-94
N.N.N.97-110
N.N.N.113-126
N.N.N.129-142
N.N.N.145-158
N.N.N.161-174
N.N.N.177-190
N.N.N.193-206
N.N.N.209-222
N.N.N.225-238
N.N.N.241-254
Hosts Available
N.N.N.1-6
N.N.N.9-14
N.N.N.17-22
N.N.N.25-30
N.N.N.33-38
N.N.N.41-46
N.N.N.49-54
N.N.N.57-62
N.N.N.65-70
N.N.N.73-78
N.N.N.81-86
N.N.N.89-94
N.N.N.97-102
N.N.N.105-110
N.N.N.113-118
N.N.N.121-126
N.N.N.129-134
N.N.N.137-142
N.N.N.145-150
N.N.N.153-158
N.N.N.161-166
N.N.N.169-174
N.N.N.177-182
N.N.N.185-190
N.N.N.193-198
N.N.N.201-206
N.N.N.209-214
N.N.N.217-222
N.N.N.225-230
Broadcast Address
N.N.N.127
N.N.N.255
N.N.N.79
N.N.N.87
N.N.N.95
N.N.N.103
N.N.N.111
N.N.N.119
N.N.N.127
N.N.N.135
N.N.N.143
N.N.N.151
N.N.N.159
N.N.N.167
N.N.N.175
N.N.N.183
N.N.N.191
N.N.N.199
N.N.N.207
N.N.N.215
N.N.N.223
N.N.N.231
Broadcast Address
N.N.N.63
N.N.N.127
N.N.N.191
N.N.N.255
Broadcast Address
N.N.N.31
N.N.N.63
N.N.N.95
N.N.N.127
N.N.N.159
N.N.N.191
N.N.N.223
N.N.N.255
Broadcast Address
N.N.N.15
N.N.N.31
N.N.N.47
N.N.N.63
N.N.N.79
N.N.N.95
N.N.N.111
N.N.N.127
N.N.N.143
N.N.N.159
N.N.N.175
N.N.N.191
N.N.N.207
N.N.N.223
N.N.N.239
N.N.N.255
Broadcast Address
N.N.N.7
N.N.N.15
N.N.N.23
N.N.N.31
N.N.N.39
N.N.N.47
N.N.N.55
N.N.N.63
N.N.N.71
Multi-Tech Systems, Inc. MultiModem rCell User Guide 59
N.N.N.136
N.N.N.140
N.N.N.144
N.N.N.148
N.N.N.152
N.N.N.156
N.N.N.160
N.N.N.164
N.N.N.168
N.N.N.172
N.N.N.176
N.N.N.180
N.N.N.184
N.N.N.188
N.N.N.192
N.N.N.196
N.N.N.200
N.N.N.204
N.N.N.208
N.N.N.212
N.N.N.216
N.N.N.220
N.N.N.224
N.N.N.228
N.N.N.232
N.N.N.236
N.N.N.240
N.N.N.244
N.N.N.248
N.N.N.252
N.N.N.48
N.N.N.52
N.N.N.56
N.N.N.60
N.N.N.64
N.N.N.68
N.N.N.72
N.N.N.76
N.N.N.80
N.N.N.84
N.N.N.88
N.N.N.92
N.N.N.96
N.N.N.100
N.N.N.104
N.N.N.108
N.N.N.112
N.N.N.116
N.N.N.120
N.N.N.124
N.N.N.128
N.N.N.132
Network Number
N.N.N.232
N.N.N.240
N.N.N.248
Network Number
N.N.N.0
N.N.N.4
N.N.N.8
N.N.N.12
N.N.N.16
N.N.N.20
N.N.N.24
N.N.N.28
N.N.N.32
N.N.N.36
N.N.N.40
N.N.N.44
255.255.255.252
/30
N.N.N.137-138
N.N.N.141-142
N.N.N.145-146
N.N.N.149-150
N.N.N.153-154
N.N.N.157-158
N.N.N.161-162
N.N.N.165-166
N.N.N.169-170
N.N.N.173-174
N.N.N.177-178
N.N.N.181-182
N.N.N.185-186
N.N.N.189-190
N.N.N.193-194
N.N.N.197-198
N.N.N.201-202
N.N.N.205-206
N.N.N.209-210
N.N.N.213-214
N.N.N.217-218
N.N.N.221-222
N.N.N.225-226
N.N.N.229-230
N.N.N.233-234
N.N.N.237-238
N.N.N.241-242
N.N.N.245-246
N.N.N.249-250
N.N.N.253-254
Hosts Available
N.N.N.233-238
N.N.N.241-246
N.N.N.249-254
Hosts Available
N.N.N.1-2
N.N.N.5-6
N.N.N.9-10
N.N.N.13-14
N.N.N.17-18
N.N.N.21-22
N.N.N.25-26
N.N.N.29-30
N.N.N.33-34
N.N.N.37-38
N.N.N.41-42
N.N.N.45-46
N.N.N.49-50
N.N.N.53-54
N.N.N.57-58
N.N.N.61-62
N.N.N.65-66
N.N.N.69-70
N.N.N.73-74
N.N.N.77-78
N.N.N.81-82
N.N.N.85-86
N.N.N.89-90
N.N.N.93-94
N.N.N.97-98
N.N.N.101-102
N.N.N.105-106
N.N.N.109-110
N.N.N.113-114
N.N.N.117-118
N.N.N.121-122
N.N.N.125-126
N.N.N.129-130
N.N.N.133-134
Appendix A – Commonly Supported Subnets
N.N.N.139
N.N.N.143
N.N.N.147
N.N.N.151
N.N.N.155
N.N.N.159
N.N.N.163
N.N.N.167
N.N.N.171
N.N.N.175
N.N.N.179
N.N.N.183
N.N.N.187
N.N.N.191
N.N.N.195
N.N.N.199
N.N.N.203
N.N.N.207
N.N.N.211
N.N.N.215
N.N.N.219
N.N.N.223
N.N.N.227
N.N.N.231
N.N.N.235
N.N.N.239
N.N.N.243
N.N.N.247
N.N.N.251
N.N.N.255
N.N.N.51
N.N.N.55
N.N.N.59
N.N.N.63
N.N.N.67
N.N.N.71
N.N.N.75
N.N.N.79
N.N.N.83
N.N.N.87
N.N.N.91
N.N.N.95
N.N.N.99
N.N.N.103
N.N.N.107
N.N.N.111
N.N.N.115
N.N.N.119
N.N.N.123
N.N.N.127
N.N.N.131
N.N.N.135
Broadcast Address
N.N.N.239
N.N.N.247
N.N.N.255
Broadcast Address
N.N.N.3
N.N.N.7
N.N.N.11
N.N.N.15
N.N.N.19
N.N.N.23
N.N.N.27
N.N.N.31
N.N.N.35
N.N.N.39
N.N.N.43
N.N.N.47
60 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Appendix B – Cellular Information
Appendix B - Cellular Information
Antenna System for Cellular Devices
The cellular/wireless performance is completely dependent on the implementation and antenna design. The integration of the antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early so the performance is not compromised. If changes are made to the certified antenna system of the MultiModem, then recertification will be required by specific network carriers such as Sprint. The Antenna System is defined as the
UFL connection point from the MultiModem to the specified cable specifications and specified antenna specifications.
FCC Requirements for the Antenna
The antenna gain, including cable loss, for the radio you are incorporating into your product design must not exceed the requirements at 850 MHz and 1900 MHz as specified by the FCC grant for mobile operations and fixed mounted operations as defined in 2.1091 and 1.1307 of the FCC rules for satisfying RF exposure compliance. The antenna used for transmitting must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna transmitters. User and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfying RF exposure compliance.
Antenna Specifications
CDMA RF Specifications
CDMA 800
Frequency RX 869 to 894 MHz
Frequency TX 824 to 849 MHz
CDMA 1900
1930 to 1990 MHz
1850 to 1910 MHz
CDMA Antenna Requirements/Specifications
Frequency Range
Impedance
VSWR
824 – 894 MHz / 1850 – 1990 MHz
50 Ohms
VSWR shall not exceed 2.0:1 at any point across the bands of operation
Typical Radiated Gain 3 dBi on azimuth plane
Radiation Omni-directional
Polarization
Antenna Loss
TRP/TIS
Vertical
Free space not to exceed -3dB
The total radiated power (TRP) at the antenna shall be no less than
+21/20 dBm for PCS/CELL channels respectively, and the total isotropic sensitivity (TIS) at the antenna shall be no less than -104/104 dBm for
PCS/CELL channels respectively.
PTCRB Requirements for the Antenna
There cannot be any alteration to the authorized antenna system. The antenna system must maintain the same specifications. The antenna must be the same type, with similar in-band and out-of-band radiation patterns.
GSM/EGSM RF Specifications
GSM 850 EGSM 900
Frequency RX 869 to 894 MHz 925 to 960 MHz
Frequency TX 824 to 849 MHz 880 to 915 MHz
GSM 1800 GSM 1900
1805 to 1880 MHz 1930 to 1990 MHz
1710 to 1785 MHz 1850 to 1910 MHz
Multi-Tech Systems, Inc. MultiModem rCell User Guide 61
Appendix B – Cellular Information
GSM Antenna Requirements/Specifications
Frequency Range
Impedance
VSWR
824 – 960 MHz / 1710 – 1990 MHz
50 Ohms
VSWR shall not exceed 2.0:1 at any point across the bands of operation
Typical Radiated Gain 3 dBi on azimuth plane
Radiation
Polarization
Antenna Loss
TRP/TIS
Omni-directional
Vertical
Free space not to exceed -3db
Including cable loss the total radiate power (TRP) at the antenna shall be no less than +22/24.5 dBm for 850/1900 MHz respectively, and the total isotropic sensitivity (TIS) at the antenna shall be no less than -99/101.5 dBm for 850/1900 MHz respectively.
HSDPA / UMTS RF Specifications
Bands I, II, V UMTS 850 Band V UMTS 1900 Band II UMTS 2100 Band I
Frequency RX 869 to 894 MHz 1930 to 1990 MHz 2110 to 2170 MHZ
Frequency TX 824 to 849 MHz 1850 to 1910 MHz 1920 to 1980 MHZ
HSDPA / UMTS Antenna Requirements/Specifications
Frequency Range
Impedance
VSWR
824 – 960 MHz / 1710 – 1990 MHz / 1920 – 2170 MHz
50 Ohms
VSWR shall not exceed 2.0:1 at any point across the bands of operation
Typical Radiated Gain 3 dBi on azimuth plane
Radiation
Polarization
Antenna loss
TRP/TIS
Omni-directional
Vertical
Free space not to exceed -3db
Including cable loss the total radiate power (TRP) at the antenna shall be no less than +22/24.5 dBm for 850/1900/ MHz respectively, and the total isotropic sensitivity (TIS) at the antenna shall be no less than -99/101.5 dBm for 850/1900 MHz respectively. Note: 2100MHz is not used by the
North America carriers.
GPS (Global Positioning) RF Specifications
GPS L1
Frequency RX
LNA Bias Voltage
1575.42
5V
LNA Current Consumption 40mA Max
GPS Antenna Requirements/Specifications
Frequency
Impedance
VSWR
1575MHz
50 Ohms
1.5db
Input voltage
GPS TIS
3.0V +/- 0.3V
The total isotropic sensitivity (TIS) at the antenna shall be no less than
-147 dBm
62 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Appendix B – Cellular Information
Antennas Available from Multi-Tech Systems, Inc.
Quad Band Description
Hinged Right Angle 800/900/1800/1900 MHz Cellular Modem Antenna
Hinged Right Angle 800/900/1800/1900 MHz Cellular Modem Antenna
Hinged Right Angle 800/900/1800/1900 MHz Cellular Modem Antenna
Dual Band Description
Hinged Right Angle 900/1800 MHz Cellular Modem Antenna
Hinged Right Angle 900/1800 MHz Cellular Modem Antenna
Hinged Right Angle 900/1800 MHz Cellular Modem Antenna
Hinged Right Angle 800/1900 MHz Cellular Modem Antenna
Hinged Right Angle 800/1900 MHz Cellular Modem Antenna
Hinged Right Angle 800/1900 MHz Cellular Modem Antenna
Mag Mount Dual Band Description
Mag Mount 900/1800 MHz 1/2 Wave Cellular Antenna, 12.5"
Mag Mount 900/1800 MHz 1/2 Wave Cellular Antenna, 12.5"
Mag Mount 900/1800 MHz 1/2 Wave Cellular Antenna, 12.5"
Mag Mount 900/1800 MHz 1/4 Wave Cellular Antenna, 4"
Mag Mount 900/1800 MHz 1/4 Wave Cellular Antenna, 4"
Mag Mount 900/1800 MHz 1/4 Wave Cellular Antenna, 4"
Mag Mount 850/1900 MHz 1/2 Wave Cellular Antenna, 12.5"
Mag Mount 850/1900 MHz 1/2 Wave Cellular Antenna, 12.5"
Mag Mount 850/1900 MHz 1/2 Wave Cellular Antenna, 12.5"
Mag Mount 850/1900 MHz 1/4 Wave Cellular Antenna, 4"
Mag Mount 850/1900 MHz 1/4 Wave Cellular Antenna, 4"
Mag Mount 850/1900 MHz 1/4 Wave Cellular Antenna, 4"
GPS Description
Mag Mount GPS Antenna, 5 Meter Cable
Mag Mount GPS Antenna, 5 Meter Cable
50
1
10
50
1
10
50
Qty
1
10
50
1
10
Qty
1
10
Qty
1
10
50
Qty
1
10
50
1
10
50
Part Number
ANQB-1HRA
ANQB-10HRA
ANQB-50HRA
Part Number
ANF1-1HRA
ANF1-10HRA
ANF1-50HRA
ANCF2-1HRA
ANCF2-10HRA
ANCF2-501HRA
Part Number
ANF1-1MMHW
ANF1-10MMHW
ANF1-50MMHW
ANF1-1MMQW
ANF1-10MMQW
ANF1-50MMQW
ANCF2-1MMHW
ANCF2-10MMHW
ANCF2-50MMHW
ANCF2-1MMQW
ANCF2-10MMQW
ANCF2-50MMQW
Part Number
ANGPS-1MM
ANGPS-10MM
Multi-Tech Systems, Inc. MultiModem rCell User Guide 63
Appendix C – Regulatory Compliance
Appendix C – Regulatory Compliance
92BEMC, Safety, and R&TTE Directive Compliance
The CE mark is affixed to this product to confirm compliance with the following European Community Directives:
Council Directive 2004/108/EC of 15 December 2004 on the approximation of the laws of Member States relating to electromagnetic compatibility; and
Council Directive 2006/95/EC of 12 December 2006 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits; and
Council Directive 1999/5/EC of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
94BFCC Part 15 Class A Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 47 CFR Part 15 regulations. The stated limits in this regulation are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the CFR 47 rules. Operation of this device is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference that may cause undesired operation.
Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
95BIndustry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement Canadien sur le matériel brouilleur.
64 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Appendix C – Regulatory Compliance
Appendix D – Waste Electrical and
Electronic Equipment
July, 2005
Waste Electrical and Electronic Equipment (WEEE)
The WEEE directive places an obligation on EU-based manufacturers, distributors, retailers and importers to take-back electronics products at the end of their useful life. A sister Directive, ROHS (Restriction of Hazardous Substances) complements the WEEE Directive by banning the presence of specific hazardous substances in the products at the design phase. The WEEE
Directive covers all Multi-Tech products imported into the EU as of August 13, 2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance the costs of recovery from municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements.
Instructions for Disposal of WEEE by Users in the European Union
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product.
Multi-Tech Systems, Inc. MultiModem rCell User Guide 65
Appendix E – Environmental Information
Appendix E – Environmental Information
Restriction of the Use of Hazardous Substances (RoHS)
Multi-Tech Systems, Inc.
Certificate of Compliance
2002/95/EC
Multi-Tech Systems, Inc. confirms that this product now complies with the chemical concentration limitations set forth in the directive 2002/95/EC of the European Parliament (Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment - RoHS)
These Multi-Tech Systems, Inc. products do not contain the following banned chemicals:
Lead, [Pb] < 1000 PPM
Mercury, [Hg] < 1000 PPM
Hexavalent Chromium, [Cr+6] < 1000 PPM
Cadmium, [Cd] < 100 PPM
Polybrominated Biphenyl, [PBB] < 1000 PPM
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Notes:
1. Lead usage in some components is exempted by the following RoHS annex; therefore, higher lead concentration could be found. a. Lead in high melting temperature type solders (i.e., tin-lead solder alloys containing more than 85% lead). b. Lead in electronic ceramic parts (e.g., piezoelectronic devices).
66 Multi-Tech Systems, Inc. MultiModem rCell User Guide
有害/有毒物
质/元素
Appendix E – Environmental Information
依照中国 标准的有毒有害物质信息
根据中华人民共和国信息产业部 (MII) 制定的电子信息产品 (EIP)
标准－中华人民共和国《电子信息产品污染控制管理办法》（第 39 号），也称作中国
RoHS，下表列出了 Multi-Tech Systems Inc. 产品中可能含有的有毒物质 (TS) 或有害物质 (HS)
的名称及含量水平方面的信息。
成分名称
铅
(PB)
汞
(Hg)
镉
(CD)
六价 铬
(CR6+)
多 溴联苯
(PBB)
多 溴二苯醚
(PBDE)
印刷 电路板
O O O O O O
电阻器
电容器
铁氧体磁环
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
继电器/光学部件
IC
二极管/晶体管
振 荡器和晶振
调节器
电压传感器
变压器
扬声器
连接器
LED
螺 丝、螺母以及
其它五金件
交流-直流 电源
软件/文档 CD
手 手 手 手 手
底 盘
O
O
O
X
O
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X 表示所有使用类似材料的设备中有害/有毒物质的含量水平高于 SJ/Txxx-2006 限量要求。
O 表示不含
该物质或者该物质的含量水平在上述限量要求
Multi-Tech Systems, Inc. MultiModem rCell User Guide 67
Appendix E – Environmental Information
REACH Statement
Registration of Substances:
After careful review of the legislation and specifically the definition of an “article” as defined in EC Regulation 1907/2006, Title II,
Chapter 1, Article 7.1(a)(b), it is our current view Multi-Tech Systems, Inc. products would be considered as “articles”. In light of the definition in § 7.1(b) which requires registration of an article only if it contains a regulated substance that “is intended to be released under normal or reasonable foreseeable conditions of use,” our analysis is that Multi-Tech Systems, Inc. products constitute nonregisterable articles for their intended and anticipated use.
Substances of Very High Concern (SVHC):
Per the candidate list of Substances of Very high Concern (SVHC) published October 28, 2008 we have reviewed these substances and certify the Multi-Tech Systems, Inc. products are compliant per the EU “REACH” requirements of less than
0.1% (w/w) for each substance.
If new SVHC candidates are published by the European Chemicals Agency, and relevant substances have been confirmed, that exceeds greater than 0.1% (w/w), Multi-Tech Systems, Inc. will provide updated compliance status.
Multi-Tech Systems, Inc. also declares it has been duly diligent in ensuring that the products supplied are compliant through a formalized process which includes collection and validation of materials declarations and selective materials analysis where appropriate. This data is controlled as a part of a formal quality system and will be made available upon request.
68 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Index
Index
A
Access Point Name ..................................................................... 20
AH Key ........................................................................................ 48
Authentication Algorithms ......................................................... 48
Auto Dialout configuration ......................................................... 24
Autodiscovery configuration ...................................................... 24
B
Broadcast timer .......................................................................... 24
Browse File for Upgrade in Tools ............................................... 53
Browse File to Load Configuration ............................................. 54
C
Caller ID for Wakeup on Call ...................................................... 31
Canadian Regulations ................................................................. 66
CDMA Antenna Specifications .................................................... 63
CDMA RF Specifications ............................................................. 63
Certifications ................................................................................ 9
Checking Network Registration .................................................. 17
Checking Roaming Status ........................................................... 17
Circuit Switched Data
................................................................ 9
Configure Ethernet interface ...................................................... 18
D
Daylight Savings Time configuration .......................................... 27
DDNS Client ................................................................................ 26
DDNS configuration .................................................................... 26
DDNS Status in Tools .................................................................. 53
DHCP configuration .................................................................... 43
DHCP fixed addresses ................................................................. 44
DHCP Lease Time ........................................................................ 43
DHCP server ............................................................................... 43
Dial-on-Demand ......................................................................... 30
DNAT configuration .................................................................... 38
DNAT example ............................................................................ 38
Dynamic DNS configuration ....................................................... 26
E
EMC, Safety, and R&TTE Directive Compliance .......................... 66
Ethernet ports caution ................................................................. 6
Exiting Modem Mode ................................................................. 17
F
Firmware Upgrade ..................................................................... 53
G
General Configuration – IP Setup ............................................... 23
GPS Antenna Specifications ........................................................ 64
GPS RF Specifications ................................................................. 64
GRE route configuration ............................................................. 42
GRE routing ................................................................................ 41
GRE tunnel configuration ........................................................... 41
GRE tunneling ............................................................................. 41
GSM RF Specifications ................................................................ 63
Multi-Tech Systems, Inc. MultiModem rCell User Guide
H
H323 packets connection tracking ............................................. 40
Handling Precautions ................................................................... 6
HSDPA/UMTS Antenna Specifications ........................................ 64
HSDPA/UMTS RF Specifications ................................................. 64
HTTP authentication ................................................................... 25
HTTP configuration .................................................................... 25
I
ICMP configuration .................................................................... 40
ICMP Keep Alive Check ............................................................... 30
IP Configuration .......................................................................... 24
IP Server ..................................................................................... 26
ITCP ............................................................................................ 36
L
Load Configuration ..................................................................... 54
M
Menu structure .......................................................................... 21
Modem Information ............................................................. 61, 62
N
NAT configuration ...................................................................... 29
Navigating .................................................................................. 21
Network configuration ............................................................... 35
Network/Host for Remote Configuration ................................... 28
O
Operating Temperature ............................................................... 9
P
Packet Data .................................................................................. 9
Packet Filter ................................................................................ 37
Packet filter rules ....................................................................... 37
Perfect Forward Secrecy ............................................................ 46
Pin Functions .............................................................................. 10
Polling time ................................................................................ 27
Power-On Configuration ............................................................ 34
PPP authentication ..................................................................... 30
PPP configuration ....................................................................... 30
PPTP connection tracking ........................................................... 40 protocol ...................................................................................... 36
R
Raw Dialout configuration .......................................................... 24
REACH Statement ....................................................................... 70
Remote Configuration ................................................................ 28
Reset Modem in Tools ................................................................ 53
Route configuration ................................................................... 28
S
Safe password ............................................................................ 25
Save configuration in Tools ........................................................ 54
Screen parts ............................................................................... 22
Select encryption method .......................................................... 48
69
Index
Server Port ................................................................................. 24
Service Configuration ................................................................. 36
Shutdown caution ...................................................................... 20
SNTP configuration ..................................................................... 27
Specifications ............................................................................... 9
Static Routes configuration ........................................................ 28
Statistics & Logs > DHCP Statistics .............................................. 58
Statistics & Logs > Ethernet ........................................................ 56
Statistics & Logs > Modem Information ..................................... 59
Statistics & Logs > PPP ................................................................ 57
Sub-menus ................................................................................. 22
Subnets ....................................................................................... 61
Supported Subnets ..................................................................... 61
Syslog configuration ................................................................... 24
System domain name ................................................................. 26
T
Time zone configuration ............................................................ 27
Tools ........................................................................................... 53
U
UDP ............................................................................................ 36
V
Vehicle Safety ............................................................................... 6
W
Wakeup on Call .......................................................................... 31
Wakeup on Call Examples .................................................... 32, 33
Wizard Setup ........................................................................ 18, 19
70 Multi-Tech Systems, Inc. MultiModem rCell User Guide
Scarica
Link pubblico aggiornato
Il link pubblico alla tua chat è stato aggiornato. Puoi visualizzare e gestire i tuoi link di chat dopo la registrazione qui.
Link pubblico del documento
Pubblicità