Axis 206M, AXIS 206, AXIS 206 M Quick Installation Guide

Below you will find brief information for network camera AXIS 206M, network camera AXIS 206. This document explains how to install the camera in your local network (LAN), connect the camera, and assign an IP address.

PDF
Document
AXIS 206M, AXIS 206 Quick Installation Guide | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Megapixel network camera

  • Quick installation guide

  • Supports both manual and automatic IP address assignment

  • Includes a CD with documentation and software

  • Easy to mount on a wall

  • Comes with a power adapter and a camera stand

  • Features a status indicator and a control button

Frequently asked questions

Connect the AXIS 206/206M to your network using a standard RJ-45 network cable.

Yes, you can access the camera from the internet by configuring your broadband router to allow incoming data traffic.

Disconnect the power cable. Press and hold the Control button (rear panel) and reconnect the power cable. Keep the button pressed until the Status Indicator displays yellow (this may take up to 15 seconds), then release the button. When the Status indicator displays green (which can take up to 1 minute) the camera is reset to the factory default settings.

Preparing document for printing…
0%