Microlife NC 100, NC 150 Instruction manual

Guarantee Card
Hypertension
NC 100
Human Fever
Asthma
Europe / Middle-East / Africa
Microlife AG
Espenstrasse 139
9443 Widnau / Switzerland
Tel. +41 / 71 727 70 30
Fax +41 / 71 727 70 39
Email [email protected]
www.microlife.com
Asia
Microlife Corporation.
9F, 431, RuiGang Road, NeiHu
Taipei, 11492, Taiwan, R.O.C.
Tel. 886 2 8797-1288
Fax.886 2 8797-1283
Email [email protected]
www.microlife.com
North / Central / South America
Microlife USA, Inc.
1617 Gulf to Bay Blvd., 2nd Floor Ste A
Clearwater, FL 33755 / USA
Tel. +1 727 442 5353
Fax +1 727 442 5377
Email [email protected]
www.microlife.com
Flexible Heating
IB NC 100 EN-PL 2313
Microlife NC 100
EN
Ä
2
PL
Ä
8
Microlife NC 100
1
2a
2b
3
Microlife Non Contact Thermometer NC 100
Microlife NC 100
1
8
AN
9
AO
AT
AP
AK
AQ
AL
AR
AM
AS
1
2
3
4
5
6
7
8
9
AT
AK
AL
AM
AN
AO
AP
AQ
AR
2
Measuring sensor
Tracking light
START button
Display
ON/OFF button
Mode switch
Battery compartment cover
All segments displayed
Memory
Ready for measuring
Measurement complete
Body mode
Object mode
Low battery indicator
Changing between Celsius and Fahrenheit
Recall mode
Recall the last 30 readings
Measured temperature too high
AS
BT
BK
BL
BM
BN
BO
Measured temperature too low
Ambient temperature too high
Ambient temperature too low
Error function display
Blank display
Flat battery
Replacing the battery
Read the instructions carefully before using this
device.
Type BF applied part
EN
This Microlife thermometer is a high quality product incorporating the latest technology and tested in accordance
with international standards. With its unique technology,
this device can provide a stable, heat-interference-free
reading with each measurement. The device performs a
self-test every time it is switched on to always guarantee
the specified accuracy of any measurement.
This Microlife thermometer is intended for the periodic
measurement and monitoring of human body temperature.
This thermometer has been clinically tested and proven
to be safe and accurate when used in accordance to the
operating instruction manual.
Please read through these instructions carefully in order for
you to understand all functions and safety information.
Guarantee Card
Name of Purchaser / Imię i nazwisko nabywcy
Serial Number / Numer seryjny
Date of Purchase / Data zakupu
Specialist Dealer / Przedstawiciel
NC 100
vated blue tracking light will indicate the area being
measured. After 3 seconds a long beep will verify the
completion of measurement. If the temple area hasn’t
been reached before the long beep is heard, repeat the
measurement as described above, but move the thermometer a little faster.
6. Read the recorded temperature from the LCD display.
Measuring in object mode
1. Follow steps 1-3 above, then aim the thermometer at the
center of the object you want to measure with a distance
of no more than 5 cm. Press the START button 3. After
3 seconds a long beep will verify the completion of
measurement.
2. Read the recorded temperature from the LCD display.
NOTE:
 Patients and thermometer should stay in similar
room condition for at least 30 minutes.
 Don't take a measurement while or immediately after
nursing a baby.
 Don't use the thermometer in high humidity environments.
 Patients should not drink, eat or exercise before/while
taking the measurement.
 Don't move the measurement device from the
measuring area before hearing the termination beep.

NC 100
 Use an alcohol swab to carefully clean the probe and
wait for 15 minutes before taking a measurement on
another patient.
 10 short beeps and a red LCD backlight alerts the
patient that he/she may have a temperature equal to or
higher than 37.5 °C.
 Always take the temperature in the same location, since
temperature readings may vary according to locations.
 Doctors recommend rectal measurement for newborn
infants within the first 6 months, as all other measuring
methods might lead to ambiguous results. If using a non
contact thermometer on those infants, we always recommend verifying the readings with a rectal measurement.
 In the following situations it is recommended that three
temperatures are taken with the highest one taken as
the reading:
1. Children under three years of age with a compromised
immune system and for whom the presence or
absence of fever is critical.
2. When the user is learning how to use the thermometer
for the first time until he/she has familiarized himself/
herself with the device and obtains consistent readings.
3. If the measurement is surprisingly low.
 Readings from different measuring sites should not
be compared as the normal body temperature varies
by measuring site and time of day, being highest in the
evening and lowest about one hour before waking up.
Normal body temperature ranges:
- Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F
- Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F
- Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F
- Microlife NC 100: 35.4 - 37.4 °C / 95.7 - 99.3 °F
7. Changing between Celsius and Fahrenheit
This thermometer can display temperature readings in either
Fahrenheit or Celsius. To switch the display between °C and
°F, simply turn OFF the unit, press and hold the START
button 3 for 5 seconds; after 5 seconds, the current
measurement scale («°C» or «°F» icon) will flash on the
display AO. Change the measurement scale between °C and
°F by pressing the START button 3. When the measurement scale has been chosen, wait for 5 seconds and the unit
will automatically enter the «ready for measuring» mode.
8. How to recall 30 readings in Memory Mode
This thermometer can recall the last 30 readings.
 Recall mode AP: Press the START button 3 to enter
Recall mode when power is off. The memory icon «M»
will flash.
5 EN
 Reading 1 - the last reading AQ: Press and release the
START button 3 to recall the last reading. Display 1
alone with memory icon.
 Reading 30 - readings in succession: Press and
release the START button 3 consecutively to recall the
last 30 readings in succession.
Pressing and releasing the START button 3 after the last
30 readings have been recalled will resume the above
sequence from reading 1.
 Error function display BL: The system has a malfunction.
Batteries and electronic devices must be dis Blank display BM: Check if the batteries have been
posed of in accordance with the locally applicable
inserted correctly. Also check polarity (<+> and <->) of
regulations, not with domestic waste.
the batteries.
 Flat battery indicator BN: If only «» icon is shown on 12.Guarantee
the display, the batteries should be replaced immediately.
This device is covered by a 2 year guarantee from the date
of purchase. The guarantee is valid only on presentation of
10.Cleaning and Disinfecting
the guarantee card completed by the dealer (see back)
Use an alcohol swab or cotton tissue moistened with
confirming date of purchase or the receipt.
alcohol (70% Isopropyl) to clean the thermometer casing
 The guarantee covers the device. Batteries and pack9. Error Messages
and the measuring sensor. Ensure that no liquid enters the
aging are not included.
 Measured temperature too high AR: Displays «H»
interior of the device. Never use abrasive cleaning agents,  Opening or altering the device invalidates the guarantee.
when measured temperature is higher than 42.2 °C /
thinners or benzene for cleaning and never immerse the
 The guarantee does not cover damage caused by
108.0 °F in body mode or 100 °C / 212 °F in object mode. device in water or other cleaning liquids. Take care not to
improper handling, discharged batteries, accidents or
 Measured temperature too low AS: Displays «L»
scratch the surface of the sensor lens and the display.
non-compliance with the operating instructions.
when measured temperature is lower than 34.0 °C /
Please contact Microlife-service.
11.Battery
Replacement
93.2 °F in body mode or 0 °C / 32 °F in object mode.
 Ambient temperature too high BT: Displays «H»
This device is supplied with 2 new, long-life 1.5V, size AAA 13.Technical Specifications
and
when ambient temperature is higher than
batteries. Batteries need replacing when this icon «» BN
Type:
Non Contact Thermometer NC 100
40.0 °C / 104.0 °F.
is the only symbol shown on the display.
MeasureBody mode: 34.0-42.2 °C / 93.2-108.0 °F
 Ambient temperature too low BK: Displays «L» and
Use a screwdriver to open the battery cover BO.
when ambient temperature is lower than 16.0 °C / Replace the batteries – ensure correct polarity as shown by ment range: Object mode: 0-100.0 °C / 32-212.0 °F
60.8 °F in body mode or lower than 5.0 °C / 41.0 °F in the symbols in the compartment.
Resolution: 0.1 °C / °F
object mode.
6
Measurement accuracy:
Display:
Acoustic:
Memory:
NC 100
Laboratory:
0.2 °C, 36.0  39.0 °C
(0.4 °F, 96.8  102.2 °F)
Liquid Crystal Display, 4 digits plus special
icons
The unit is turned ON and ready for the
measurement: 1 short beep
Complete the measurement: 1 long beep
(1 sec.) if the reading is less than 37.5 °C /
99.5 °F, 10 short «beep» sounds, if the
reading is equal to or greater than 37.5 °C /
99.5 °F.
System error or malfunction: 3 short «bi»
sounds
Auto-Display the last measured temperature
30 readings recall in the memory mode
Backlight:
The display light will be GREEN for
4 seconds, when the unit is turned ON.
The display light will be GREEN for 5
seconds, when a measurement is completed
with a reading less than 37.5 °C / 99.5 °F.
The display light will be RED for 5 seconds,
when a measurement is completed with a
reading equal to or higher than 37.5 °C /
99.5 °F.
Operating Body mode: 16-40.0 °C / 60.8-104.0 °F
temperature: Object mode: 5-40.0 °C / 41-104.0 °F
Storage
-20 - +50 °C / -4 - +122 °F
temperature: 15-95 % relative maximum humidity
Automatic Approx. 1 minute after last measurement
Switch-off: has been taken.
Battery:
2 x 1.5 V Batteries; size AAA
Dimensions: 150 x 40 x 39 mm
Weight:
81 g (with batteries), 56 g (w/o batteries)
Reference to ASTM E1965;
standards: IEC 60601-1; IEC 60601-1-2 (EMC)
This device complies with the requirements of the Medical
Device Directive 93/42/EEC.
Technical alterations reserved.
According to the Medical Product User Act a biennial technical inspection is recommended for professional users.
Please observe the applicable disposal regulations.
14.www.microlife.com
Detailed user information about our thermometers and
blood pressure monitors as well as services can be found
at www.microlife.com.
7 EN
1
2
3
4
5
6
7
8
9
AT
AK
AL
AM
AN
AO
AP
8
AR
AS
BT
BK
BL
BM
BN
BO
NC 100
9 PL
10

4. Symbole kontrolne

NC 100
11 PL
12
NC 100
Akustyka:
13 PL