Bedienungsanleitung

099-080
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
099-080
1.
2.
3.
4.
5.
6.
•
•
•
•
•
•
•
•
•
•
•
•
•
099-080
Reference Manual
Wireless Camera McVoice „MK-209 RF color“
Preface
Dear Customer,
we like to congratulate you on the
purchase of your new wireless camera!
You have chosen a product which
combines deliberate technical features
with an appealing design.
Please read this manual conscientiously
and carry out the given instructions before
and while you are using your new device.
Technical Specifications:
Capability Characteristics
• Because of the compact design the camera is
place able almost everywhere.
• The camera has an integrated microphone.
• 4 channels with Loop-function enable to upgrade
the system with additional cameras and receivers.
• The camera has infrared (IR)-sensors which
enable the night vision.
Weight: 89g [C]; 126g [R]
Size (H*W*D): 57*46*42mm [C];15*90*70mm [R]
Operation: DC 8V [C]; DC 8V [R]
Transmission Frequency: 2400 – 2483 MHz
Channels: 2414MHz, 2432MHz, 2450MHz, 2468MHz
Modulation / Demodulation: FM / FM
Bandwidth [C]: 18MHz
Consumption Current max.: 200 mA [C]; 250 mA [R]
Transmission Power [C]: 10mW
Receiving Sensitivity [R]: ≤ -85 dBm
Sensor Type [C]: 1/3“ Color C-MOS
Resolution [C]: 720 x 576 (PAL); 720 x 480 (NTSC)
Range Night Vision [C]: 3m
Antenna: 50Ω SMA
Audio Output Level [R]: 3.0 Vpp ±1 Vpp @ 600 Ω
Video Output Level [R]: 1.1 Vpp ±0.2 Vpp @ 75 Ω
Function Environment: (-10 ~ 50)°C & 85% RH
LEGEND: [C] = Camera; [R] = Receiver
Security Advices
•
•
•
•
•
•
•
•
Before using the device, please check it for any possible damages. In case of damage do not operate it.
Unplug the device if you do not use it for a certain time.
The device may not become subject of mechanical stress and should not be exposed to humidity.
To be considerate of the ventilation do not cover the device and protect it from direct solar radiation.
Clean the device with a dry and soft cloth only.
Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified
service agent.
Please dispose packaging materials properly and do not let play children with it.
The device itself is no toy either. Do not let children play with it too.
099-080
Parts and Functions:
1
2
3
4
5
Wireless Camera
Receiver
Audio / Video – Cable (Cinch)
Power Supply for the Receiver
Power Supply for the Camera
1.
2.
3.
4.
5.
6.
Antenna
IR-sensors
Lens
Bracket
Power supply cable
Transmitting channel switch
099-080
1.
2.
3.
4.
5.
6.
Antenna
LED as channel indicators
Receiving channel switch
On-/Off-switch LOOP-function
Connector power supply
Connector audio/video-cable
Installation of the Camera
•
•
•
The bracket of the camera can be attached to the subsurface by screwing.
Connect the camera with its power supply and the power supply with an electric outlet. Now the camera
is ready for operation.
You can focus the camera by turning the lens.
•
Adjust the transmitting channel with the switch [6] at the
backside of the camera.
099-080
Installation of the Receiver:
•
•
•
•
•
•
•
•
•
Attach the antenna to the receiver that it has a vertical position.
Connect the receiver with its power supply and the power supply with an electric outlet. Now the
receiver is ready for operation.
Attach the receiver to an external monitor or TV with the audio / video-cable.
Connect the TV or monitor with an electric outlet.
Switch on the computer or the TV respectively and select the AV mode.
Adjust the receiving channel of the receiver that it matches the transmitting channel of the camera.
If more than one camera is involved put [4] to LOOP and it is possible to choose the automatic receiving
channel change (CHANNEL LOOP) with [3].
Now the transmitted picture should be shown on the screen.
Adjust the brightness, the contrast and the color at the monitor or the TV respectively that there is an
optimal picture produced.