Homelite UT44110, ut44110, ut44120, UT44120 Owner's manual
Homelite ut44110, ut44120 is a high-quality electric hedge trimmer that is perfect for maintaining your hedges and shrubs. It features a powerful 4.5-amp motor that can easily cut through even the thickest branches. The 22-inch dual-action blade provides a clean, precise cut, and the 180-degree rotating rear handle allows you to trim hedges at any angle. Additional features include a cord retainer to keep your cord out of the way, a debris deflector to keep clippings from flying back at you, and a lock-out button to prevent accidental starting. With its combination of power, precision, and convenience, the Homelite ut44110, ut44120 is the perfect tool for all your hedge trimming needs.
Advertisement
Advertisement
OPERATOR’S MANUAL MANUEL D’UTILISATION MANUAL DEL OPERADOR Electric Hedge Trimmer Taille-haies ÉLECTRIQUE Podadora de setos ELÉCTRICA UT44110/UT44120 (ALL VERSIONS / TOUTES LES VERSIONS / TODAS LAS VERSIONES) UT44120 UT44110 Your hedge trimmer has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Homelite product. CONSERVER CE MANUEL POUR FUTURE RÉFÉRENCE GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS Fig. 1 Fig. 2 I B A C UT44120 D E H G B F I A C UT44110 D H G ii Fig. 3 Fig. 7 Fig. 5 A B C B A Fig. 8 E D Fig. 6 A 2 1 iii TABLE OF CONTENTS Specific Safety Rules......................................................................................................................................................... 4 Règles de sécurité particulières / Reglas de seguridad específicas Symbols............................................................................................................................................................................. 5 Symboles / Símbolos Assembly........................................................................................................................................................................... 7 Assemblage / Armado Operation......................................................................................................................................................................8 - 9 Utilisation / Funcionamiento introduction Page 2 – English important safety instructions for any job except that for which it is intended. WARNING: Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. read all instructions For safe operation, read and understand all instructions before using this product. Be familiar with all controls and proper use of the machine. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury. Do not allow children or untrained individuals to use this unit. Thoroughly inspect the area where the equipment is to be used and remove all foreign objects. Dress Properly — Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. Wear heavy long pants, long sleeves, boots and gloves. Do not wear sandals or go barefoot. Always wear eye protection with side shields marked to comply with ANSI Z87.1. Secure long hair above shoulder level to prevent entanglement in moving parts. Keep all bystanders, children, and pets at least 50 ft. away. Stay Alert — Watch what you are doing; use common sense. Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication. Do not operate in poor lighting. Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance or exposure to hot surfaces. Keep all parts of your body away from any moving part. Inspect the unit before each use for loose fasteners, etc. Replace any damaged parts before use. Store Idle Trimmers Indoors — When not in use, product should be stored indoors in a dry, locked up place—out of the reach of children. When servicing use only identical replacement parts. Failure to do so may cause poor performance, possible injury, and will void your warranty. Do not, under any circumstance, use any attachment or accessory on this product which was not provided with the product or identified as appropriate for use with this product in the operator’s manual. Avoid dangerous environments. Do not use the product in damp or wet locations. Do not use in rain. Use the right appliance. Do not use the hedge trimmer Do not use on steps, a ladder, rooftop, or unstable support. Stable footing on a solid surface enables better control of the product in unexpected situations. Do not force the hedge trimmer. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed. DANGER! — Risk of Cut. Keep hands away from cutting area. Keep both hands on handles when power is on. Keep hands away from blades. Do not reach underneath work or around or over the blade while blade is rotating. Do not attempt to remove cut material when blade is moving. Make sure hedge trimmer is off and extension cord is unplugged from power source when clearing jammed materials from blades. Do not grasp the exposed cutting blades or cutting edges when picking up or holding the hedge trimmer. CAUTION! — Blade coasts after being turned off. To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way. Do not abuse the cord. Never use the cord to carry the product or to disconnect the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. Extension Cord — make sure your extension cord is in good condition. Make knot as illustrated in figure 1 on page 7. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 16 is recommended for an extension cord 50 feet or less in length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Warning! Use outdoor extension cords marked SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A. These cords are rated for outdoor use and reduce the risk of electric shock. Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the Page 3 – English important safety instructions hedge trimmer. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil or grease. Disconnect Hedge Trimmer — Always stop the motor and disconnect from power supply when not in use, before attempting to remove any obstruction caught or jammed in the blade, or before removing and installing the blade. To avoid accidental starting, never carry plugged in hedge trimmer with finger on switch. Be sure switch is off when plugging in. Maintain hedge trimmer with care. Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect hedge trimmer cord periodically and, if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease. Check damaged parts. Before further use of the hedge trimmer, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual. Save these instructions. SPECIFIC SAFETY RULES Use non-slip, heavy-duty protective gloves when operating the hedge trimmer and when installing or removing blades. Replace any blade that has been damaged. Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious injury. Never cut any material over 3/8 in. diameter for the UT44110 or 1/2 in. diameter for the UT44120. Maintain a firm grip on both handles while cutting with a blade. Keep the blade away from body. Know how to stop the unit quickly in an emergency. Do not use trimmer without front handles in place. Keep both hands on handles when the unit is in use. If hedge trimmer is equipped with a clipping deflector, do not use the clipping deflector as a gripping surface. Disconnect the plug from power source before making any adjustments, changing accessories, or storing the hedge trimmer. Such preventive safety measures reduce the risk of starting the product accidentally. Service on the product must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product. If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury. Page 4 – English SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product. Eye Protection Always wear eye protection with side shields marked to comply with ANSI Z87.1. Wet Conditions Alert Do not expose to rain or use in damp locations. Risk of Electrocution DANGER! Risk of electrocution! Electric Shock Failure to use in dry conditions and to observe safe practices can result in electric shock. Keep Bystanders Away Keep all bystanders at least 50 ft. away. Operate With Two Hands Hold and operate the hedge trimmer properly with both hands. No Hands Symbol Failure to keep your hands away from the blade will result in serious personal injury. Hot Surface To reduce the risk of injury or damage, avoid contact with any hot surface. V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power hrs Hours Time Class II Construction Double-insulated construction Page 5 – English FEATURES electrical DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual threewire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together. **Ampere rating (on product data plate) WARNING: The double insulated system is ­intended to protect the user from shock resulting from a break in the tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock. NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the product to your nearest authorized service center for repair. Always use original factory replacement parts when servicing. ELECTRICAL CONNECTION This product has a precision-built electric motor. It should be connected to a power supply that is 120 volts, AC only, 60 Hz (normal household current). Do not operate this product on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not operate when plugged into an outlet, double-check the power supply. EXTENSION CORDS See Figure 1. When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used. 0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0 Cord LengthWire Size (A.W.G.) 25' 16 16 16 16 14 14 50' 16 16 16 14 14 12 100' 16 16 14 12 10 — **Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge WARNING: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury. WARNING: Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury. When working outdoors with a product, use an extension cord that is designed for outside use. This type of cord is designated with “W-A” or “W” on the cord’s jacket. Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation. A proper extension cord is available at an authorized service center. Page 6 – English FEATURES FEATURES PRODUCT SPECIFICATIONS UT44110 Cutting Capacity........................................................ 3/8 in. Total Blade Length...................................................... 17 in. Cutting Strokes Per Minute......................................... 3,200 Input........................................ 120 V, AC only, 60 Hz, 2.7 A Weight...................................................................... 4.6 lbs. UT44120 Cutting Capacity........................................................ 1/2 in. Total Blade Length...................................................... 22 in. Cutting Strokes Per Minute......................................... 3,200 Input........................................ 120 V, AC only, 60 Hz, 3.7 A Weight...................................................................... 5.5 lbs. KNOW YOUR hedge TRIMMER cord retainer See Figure 2. The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all ­operating features and safety rules. A convenient cord retainer helps keep the extension cord connection secure during trimmer operation. clipping deflector (model ut44120 only) switch trigger When installed, the clipping deflector makes removal of cut debris easier. The switch trigger, located beneath the rear handle, and the lock-out button, located behind the front handle, must be depressed simultaneously to allow blade rotation. GUARD The guard helps to deflect chips or other debris away from the operator’s hands. ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-242-4672 for assistance. PACKING LIST WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. Hedge Trimmer Clipping Deflector (UT44120 only) Deflector Retainer (UT44120 only) Operator’s Manual Page 7 – English OPERATION DANGER: Never use near power lines or other electric sources. Contact with power lines or electric sources will result in death by electrocution or serious injury. WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. Slide the deflector completely onto the guide bar so the angled edge of the deflector rests beneath the guard. Insert the deflector retainer in the end of guide bar. WARNING: Never use the clipping deflector as a handle or attempt to hold or guide the hedge trimmer by gripping the clipping deflector. Always keep both hands on the hedge trimmer handles. Improper handling of hedge trimmer could result in serious injury. CONNECTING TO POWER SUPPLY WARNING: Always wear eye protection marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. See Figure 5. This product is designed with a cord retainer that prevents the extension cord from being pulled loose while using. n Form a loop with the end of the extension cord. n Insert loop portion of extension cord through opening in the bottom of the rear handle and place over cord retainer. n Slowly pull loop against cord retainer until the slack is ­removed. n Plug product into extension cord. NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening from receptacle. CUTTING TIPS See Figures 6 - 7. APPLICATIONS You may use this product for the purpose listed below: n Trimming and shaping hedges and shrubbery STARTING AND STOPPING See Figure 3. Attach the outlet end of an extension cord to the plug on the rear of the hedge trimmer. Route extension cord through cord retainer as shown on the next page. NOTE: Use only an approved outdoor extension cord as described previously in this manual. Grasp the front handle with your left hand and the rear handle with your right hand. The switch trigger and the lock-out button must be ­depressed simultaneously to begin blade rotation. To stop blade rotation, release the switch ­trigger. installing clipping deflector (model UT44120 only) See Figure 4. NOTE: Always wear non-slip, heavy-duty gloves when installing or removing the clipping deflector. Disconnect the plug from the power source. Place the hedge trimmer on a sturdy flat surface. Align the angled edge of the clipping deflector with the grooves on the guide bar. WARNING: Always keep both hands on the hedge trimmer handles. Never hold shrubs with one hand and operate hedge trimmer with the other. Improper handling of hedge trimmer could result in serious injury. WARNING: Clear the area to be cut before each use. Remove all objects such as cords, lights, wire, or loose string which can become entangled in the cutting blade and create a risk of electric shock and serious personal injury. When operating the hedge trimmer, keep the extension cord behind the trimmer. Never drape it over the hedge being trimmed. Do not force the hedge trimmer through heavy shrubbery. This can cause the blades to bind and slow down. If the blades slow down, reduce the pace. Do not attempt to cut stems or twigs that are larger than 3/8 in. thick for the UT44110 or 1/2 in. thick for the UT44120, or those obviously too large to feed into the cutting blade. Use a non-powered hand saw or pruning saw to trim large stems. Page 8 – English OPERATION If blades do become jammed, stop the motor, allow the blades to stop, and disconnect the plug from the power source before attempting to remove the obstruction. If desired, you can use a string to help cut your hedge level. Decide how high you want the hedge. Stretch a piece of string along the hedge at the desired height. Trim the hedge just above the guide line of string. Trim the side of a hedge so that it will be slightly narrower at the top. More of the hedge will be exposed when shaped this way, and it will be more uniform. Wear gloves when trimming thorny or prickly growth. When trimming new growth, use a wide sweeping action, so that the stems are fed directly into the cutting blade. Older growth will have thicker stems and will be trimmed easiest by using a sawing movement. OPERATING THE HEDGE TRIMMER WARNING: Read the safety information for safe operation using the blade. Extreme care must be taken when using blades to ensure safe operation. Refer to Important Safety Instructions and Specific Safety Rules. Always hold hedge trimmer with both hands when operating. Use a firm grip on the handles. The unit is used for cutting in either direction in a slow, sweeping action from side to side. Stand so that you are stable and balanced on both feet. Do not overreach. Inspect and clear the area of any hidden objects. Never use the hedge trimmer near power lines, fencing, posts, buildings, or other immovable objects. Never use a blade after hitting a hard object without first inspecting it for damage. Do not use if any damage is detected. Page 9 – English MAINTENANCE LUBRICATING THE BLADE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear eye protection marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Before inspecting, cleaning, or servicing the machine, ­disconnect the plug from power source and wait for all moving parts to stop. Failure to follow these instructions can result in serious personal injury or property ­damage. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WARNING: Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury. See Figure 8. For easier operation and longer blade life, lubricate the hedge trimmer blade before and after each use. Stop the motor and disconnect from power supply. Lay the hedge trimmer on a flat surface. Apply light weight machine oil along the edge of the top blade. If you will be using the hedge trimmer for an extended period, it is advisable to oil the blade during use. NOTE: Do not oil while the hedge trimmer is running. Stop the motor and disconnect from power supply. Lubricate the hedge trimmer as described above. Reconnect to the power source and resume use. CLEANING THE HEDGE TRIMMER Stop the motor and disconnect from power supply. Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild detergent. NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene. STORing the trimmer Clean all foreign material from the product. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center. WARNING: Blades are sharp. When handling the blade assembly, wear non-slip, heavy-duty protective gloves. Do not place your hand or fingers between blades or in any position where they could get pinched or cut. NEVER touch blades or service unit with the power supply connected. Page 10 – English exploded view and parts list The model number will be found on a plate attached to the engine housing. Always mention the model number in all correspondence regarding your hedge trimmer or when ordering replacement parts. 1 2 PARTS LIST KEY NO. DESCRIPTION QTY 1 34201162G * Deflector Retainer.......................................................................................................1 2 3401162G * Clipping Deflector.......................................................................................................1 987000229 Operator’s Manual * For Use With Model UT44120 Only Page 11 – English WARRANTY LIMITED WARRANTY STATEMENT Homelite Consumer Products, Inc., (“Homelite”) warrants to the original retail purchaser that this HOMELITE brand outdoor product is free from defect in material and workmanship and agrees to repair or replace, at Homelite’s, discretion, any defective product free of charge within these time periods from the date of purchase. Two years for all models if used for personal, family, or household use; 90 days for any unit used for other purposes, such as rental or commercial. This warranty extends to the original retail purchaser only and commences on the date of the original retail purchase. Any part of the this product manufactured or supplied by Homelite and found in the reasonable judgment of Homelite to be defective in material or workmanship will be repaired or replaced without charge for parts and labor by a Homelite authorized service center. The product, including any defective part, must be returned to an authorized service dealer within the warranty period. The expense of delivering the product to the dealer for warranty work and the expense of returning it back to the owner after repair or replacement will be paid by the owner. Homelite’s responsibility in respect to claims is limited to making the required repairs or replacements and no claim of breach of warranty shall be cause for cancellation or rescission of the contract of sale of any HOMELITE brand product. Proof of purchase will be required by the dealer to substantiate any warranty claim. All warranty work must be performed by a Homelite authorized service center. This warranty is limited to ninety (90) days from the date of original retail purchase for any HOMELITE brand product that is used for rental or commercial purposes, or any other income-producing purpose. This warranty does not cover any HOMELITE brand product that has been subject to misuse, neglect, negligence, or accident, or that has been operated in any way contrary to the operating instructions as specified in this operator’s manual. This warranty does not apply to any damage to the product that is the result of improper maintenance or to any product that has been altered or modified. The warranty does not extend to repairs made necessary by normal wear or by the use of parts or accessories which are either incompatible with the homelite brand product or adversely affect its operation, performance, or durability. In addition, this warranty does not cover: A. Tune-ups – Spark Plugs, Carburetor, Carburetor Adjustments, Ignition, Filters B. Wear items – Bump Knobs, Outer Spools, Cutting Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades, Blower Fans, Blower and Vacuum Tubes, Vacuum Bags and Straps, Guide Bars, Saw Chains Homelite reserves the right to change or improve the design of any HOMELITE brand product without assuming any obligation to modify any product previously manufactured. ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE STATED WARRANTY PERIOD. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-DAY WARRANTY PERIOD. HOMELITE’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS AND HOMELITE DOES NOT ASSUME OR AUTHORIZE ANYONE TO ASSUME FOR THEM ANY OTHER OBLIGATION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. HOMELITE ASSUMES NO RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED TO, EXPENSE OF RETURNING THE PRODUCT TO AN AUTHORIZED homelite SERVICE center AND EXPENSE OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT DURING THE TIME WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, OR INCONVENIENCE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty applies to all HOMELITE brand products manufactured by or for Homelite and sold in the United States and Canada. To locate your nearest Homelite authorized service center, dial 1-800-242-4672 or log on to our website at www.homelite.com. Page 12 – English notES Page 13 – English SYMBOLE SIGNAL DANGER : ATTENTION : Nom V Volts Voltage A Hz Hertz W Watt Puissance h Temps AVERTISSEMENT : 0-2,0 2,1-3,4 3,5-5,0 5,1-7,0 7,1-12,0 12,1-16,0 16 16 16 16 14 14 50´ 16 16 16 14 14 12 100´ 16 16 14 12 10 — **Utilisé sur circuit de calibre 12 – 20 A NOTE : AWG = American Wire Gauge RETENUE DE CORDON UTILISATION INSTALLATION DU DÉFLECTEUR DE DÉBRIS DANGER : (MODÈLE UT44120 SEULEMENT) UTILISATION UTILISATION DU TAILLE-HAIES ENTRETIEN LUBRIFICATION DES LAMES 1 2 DESCRIPTION QTÉ 1 34201162G * 2 3401162G * 987000229 notES INSTRUCCIONES DE SEGURIDAD IMPORTANTES SEÑAL SIGNIFICADO PELIGRO: ADVERTENCIA: PRECAUCIÓN: PRECAUCIÓN: Alerta de seguridad V Volts Voltaje A Amperes Hz Hertz W Watts Potencia hrs Horas Tiempo 0-2,0 2,1-3,4 3,5-5,0 5,1-7,0 7,1-12,0 12,1-16,0 16 16 16 16 14 14 50´ 16 16 16 14 14 12 100´ 16 16 14 12 10 — CARACTERÍSTICAS CARACTERÍSTICAS ESPECIFICACIONES DEL PRODUCTO FAMILIARÍCESE CON SU PODADORA DE SETOS RETÉN PARA EL CORDÓN DEFLECTOR DE DESECHOS (model ut44120 LISTA DE EMPAQUETADO FUNCIONAMIENTO INSTALACIÓN DEL DEFLECTOR DE DESECHOS peligro: (MODELO UT44120 ÚNICAMENTE) MANEJO DE LA PODADORA DE SETOS Vea las figuras 6 - 7. FUNCIONAMIENTO UTILIZACIÓN DE LA PODADORA DE SETOS MANTENIMIENTO LUBRICACIÓN DE LA HOJA DE CORTE LIMPIEZA DE LA PODADORA DE SETOS ADVERTENCIA: 1 2 LISTA DE PIEZAS NÚM. REF. NÚM. PIEZA DESCRIPCIÓN CANT. 1 34201162G * 2 3401162G * 987000229 notAS Electric Hedge Trimmer OPERATOR’S MANUAL MANUEL D’UTILISATION MANUAL DEL OPERADOR Taille-haies ÉLECTRIQUE Podadora de setos ELÉCTRICA UT44110/UT44120 ALL VERSIONS / TOUTES LES VERSIONS / TODAS LAS VERSIONES SERVICE For parts or service, contact your nearest Homelite authorized service dealer. Be sure to provide all relevant information when you call or visit. For the location of the authorized service dealer nearest you, please call 1-800-242-4672 or visit us online at www.homelite.com. REPAIR PARTS The model number of this product is found on a plate or label attached to the housing. Please record the serial number in the space provided below. UT44110/UT44120 UT44110/UT44120 _NÚMERO DE MODELO_________________________ _NÚMERO DE SERIE_ _________________________ HOMELITE CONSUMER PRODUCTS, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 1-800-242-4672 • www.homelite.com 987000-229 9-11-09 (rev:03)">
Download
Advertisement
Key features
Powerful 4.5-amp motor for cutting through thick branches
22-inch dual-action blade for a clean, precise cut
180-degree rotating rear handle for trimming hedges at any angle
Cord retainer to keep your cord out of the way
Debris deflector to keep clippings from flying back at you
Lock-out button to prevent accidental starting
Frequently asked questions
4.5 amps
22 inches
Yes, 180 degrees
Yes
Yes
Yes