Trendnet TEW-822DRE AC1200 WiFi Range Extender User's Guide

TRENDnet User’s Guide TEW-822DRE

Table of Contents

Table of Contents......................................................................................2

Product Overview ....................................................................................4

Features ........................................................................................................................... 4

Easy Setup.................................................................................................................. 4

AC1200 Dual Band ................................................................................................. 4

Extreme Coverage .................................................................................................. 4

Gigabit Port ............................................................................................................... 4

No Clutter................................................................................................................... 4

Operating Modes..................................................................................................... 4

Encrypted Wireless................................................................................................ 4

Compatibility ............................................................................................................ 4

Targeted Beamforming ........................................................................................ 4

Package Contents......................................................................................................... 5

Hardware Features ..................................................................................6

Application Diagram ...............................................................................8

Range Extender Set Ups .............................................................................................. 9

WPS Connection ........................................................................................................... 9

Web Browser Configuration .................................................................................11

Access Point Set Up.....................................................................................................16

Connecting to your computer to TEW-822DRE............................................16

Range Extender Web Management ................................................. 17

System Management and Default Settings ......................................................17

Access the Management page ...............................................................................17

Accessing TEW-822DRE with 192.168.10.100: .......................................17

Accessing TEW-822DRE with dynamic IP: ................................................17

Accessing TEW-822DRE with product name:...........................................17

Multi-Language ...........................................................................................................17

System Settings ...................................................................................... 18

Main - Wizard ..............................................................................................................18

Main - Network Settings..........................................................................................18

Dynamic IP...............................................................................................................18

Static IP .....................................................................................................................19

Main - System ..............................................................................................................20

Main - Time Settings .................................................................................................21

Main – IPv6 (Access Point Mode) ........................................................................22

Link-Local IPv6 Address ....................................................................................22

Static IPv6 Address ..............................................................................................22

Dynamic IPv6 Address........................................................................................23

Wireless (Range Extender Mode) .......................................................................24

Site Survey ...............................................................................................................24

Wireless (Access Point Mode) - Basic................................................................26

Wireless (Access Point Mode) - Advanced ......................................................29

Wireless (Access Point Mode) - WPS .................................................................30

Status - System Information ..................................................................................31

Status - Local Logs .....................................................................................................33

Status - Statistics ........................................................................................................34

Status - Wireless Client List ...................................................................................35

Status (Access Point Mode) – IPv6 .....................................................................35

Access (Access Point Mode) – MAC Filter ........................................................36

Access (Access Point Mode) – Multiple SSID ..................................................37

Wireless Security ..................................................................................................37

Access (Access Point Mode) – User Limit ........................................................38

Tools - Upload Firmware ........................................................................................38

Tools - Backup Settings ...........................................................................................39

© Copyright 2015 TRENDnet. All Rights Reserved.

2

TRENDnet User’s Guide TEW-822DRE

Tools - Ping Test.........................................................................................................39

Tools (Access Point Mode) - Schedule ..............................................................40

Edit a schedule .......................................................................................................40

Delete a schedule ..................................................................................................40

Tools - Email Notification.......................................................................................41

Tools - Remote Logging...........................................................................................42

Tools - LED Control ...................................................................................................42

Tools - Logout..............................................................................................................43

Technical Specifications ..................................................................... 44

Troubleshooting .................................................................................... 45

Appendix .................................................................................................. 47

How to setup a static IP address on your computer ...................................47

Windows 8...............................................................................................................47

Windows 7...............................................................................................................48

OS X.............................................................................................................................50

Regulations.............................................................................................. 52

Federal Communication Commission Interference Statement ...................52

FCC Radiation Exposure Statement ..............................................................52

Industry Canada .........................................................................................................53

Caution:.....................................................................................................................53

Avertissement:.......................................................................................................53

Radiation Exposure Statement: ......................................................................53

Déclaration d'exposition aux radiations:....................................................53

Europe – EU Declaration of Conformity ...........................................................54

Safety .........................................................................................................................54

EMC.............................................................................................................................54

Radio Spectrum & Health ..................................................................................54

Energy Efficiency ..................................................................................................54

Directives .................................................................................................................54

RoHS ................................................................................................................................55

ErP Statement..............................................................................................................56

Limited Warranty.................................................................................. 58

© Copyright 2015 TRENDnet. All Rights Reserved.

3

TRENDnet User’s Guide TEW-822DRE

Product Overview

TEW-822DRE

Features

TRENDnet's AC1200 WiFi Range Extender, model TEW-822DRE, offers extreme wireless coverage to eliminate existing wireless network dead spots. Setup takes minutes with no drivers to install and it stays out of the way by plugging directly into an outlet. Connect to either an existing WiFi

N or WiFi AC router and extend concurrent WiFi N and AC networks into an area with low or no wireless.

Easy Setup

Quick intuitive setup connects to either a WiFi AC or WiFi N network and adopts existing WiFi settings

AC1200 Dual Band

Broadcasts concurrent high speed 867 Mbps WiFi AC + 300 Mbps WiFi N networks

Extreme Coverage

Adjustable external antennas, high power amplifiers, and multiple antenna technology produces extreme wireless coverage

Gigabit Port

Gigabit port extends a high performance connection to a wired device

No Clutter

The extender plugs directly into an outlet

Operating Modes

External switch toggles between Extender (connects to a WiFi network) and Access Point (connects to a wired network) modes

Encrypted Wireless

Supports the latest encryption standards

Compatibility

Compatible with legacy wireless devices

Targeted Beamforming

Increased real-time performance by directing stronger wireless signals to a device’s specific location

© Copyright 2015 TRENDnet. All Rights Reserved.

4

TRENDnet User’s Guide TEW-822DRE

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on

interference, network traffic, building materials and other conditions.

Package Contents

TEW-822DRE package includes:

• TEW-822DRE

• Multi-Language Quick Installation Guide

• CD-ROM (User’s Guide)

If any package content is missing or damaged, please contact the retail store, online

retailer, or reseller/distributor from which the product was purchased.

© Copyright 2015 TRENDnet. All Rights Reserved.

5

TRENDnet User’s Guide

Hardware Features

Network Port Operating Mode

Switch

Network Port Connect a network cable (Ethernet cable) to your network when operating in AP (Access

Point) mode.

Operation

Mode Switch

Position the Operation Mode Switch to Off to turn off the wireless. Position the switch to

Extender to operate TEW-822DRE in Range

Extender mode. Position the switch to AP to work in Access Point mode.

© Copyright 2015 TRENDnet. All Rights Reserved.

Adjustable

Antenna

Power Plug

TEW-822DRE

WPS Button

+

LED Indicator

Power Plug

Release Button

WPS

(Wi-Fi Protected

Setup)

Button + LED

Indicator

Push and release the WPS button to activate

WPS copying wireless settings from your router (press 5 sec. in Range Extender mode) or connect to the client (press 1 sec. in Range

Extender or AP mode). The LED indicator will start blinking when WPS pairing is activated.

Reset Button Resets your repeater. Push and hold this button for 10 seconds with a pin or paper clip to reset configuration to factory default.

Power Plug

Release Button

To exchange different style of power plug.

(This package comes with only one power plug.)

6

TRENDnet User’s Guide

Wireless

Network

LED Indicators

Power The indicator is blinking blue when your range extender is powered on. When this light is off, there is no power on your range extender.

Power

TEW-822DRE

Network Connect a network cable (Ethernet cable) to your computer for manual configuration.

Wireless The Wireless LED shows the wireless connection between Range Extender and your wireless router.

Blue Light: When it lights with solid blue, the

Range Extender established a good wireless connection with your router. When it blinks, it means there are data running through the wireless connection.

Red Light: When wireless connection is weak, the

Wireless LED is in red. The Range Extender can still extend the weak wireless signal in lower speed.

It is recommend to relocate your wireless router or

Range Extender once there’s a chance.

Off: The Wireless LED will be turned off if there’s no wireless connection to your wireless router at all.

© Copyright 2015 TRENDnet. All Rights Reserved.

7

TRENDnet User’s Guide

Application Diagram

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

TEW-822DRE is a dual band

802.11ac range extender which can extend your wireless router’s range and coverage. Furthermore, it can expand signals to both 2.4

GHz and 5 GHz bands to the clients for dual band concurrent connections. Simply plug the

TEW-822DRE at a location in between your wireless router and your computer or mobile device to eliminate the dead spot of connection.

8

TRENDnet User’s Guide TEW-822DRE

Range Extender Set Ups

There are two ways to setup your Range Extender: by pushing Wi-Fi

Protected Setup (WPS) button or web browser configuration.

WPS Connection

1. Plug in the TEW-822DRE to a power outlet nearby your wireless router and position the operation switch to Extender.

3. Press and hold the WPS button on the router for 5 seconds to start

WPS pairing.

2. Press and release the WPS button for 5 seconds until the WPS LED lights. The LED will blink, which means the TEW-822DRE is starting

WPS pairing.

4. The WPS will stop blinking and the Wireless LED will lit when the connection is established.

© Copyright 2015 TRENDnet. All Rights Reserved.

9

TRENDnet User’s Guide

5. Install the TEW-822DRE in the final location. For maximum performance, install the TEW-822DRE in a location where there is at least 2 bars of connection from your WiFi router to a mobile device.

If the Wireless LED light is blue, the wireless connection to the router is good. If the Wireless LED light is red, the wireless connection is weak. Consider to change the extender's location again to have better wireless connection to the router.

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

10

TRENDnet User’s Guide

Web Browser Configuration

1. Plug in the TEW-822DRE to a power outlet nearby your wireless router and position the operation switch to Extender.

2. Open your computer or mobile device wireless network settings and search for TRENDnet822_2.4G_xxxx pre-encrypted wireless network (The xxxx is a random number. Please find your unique wireless name and pre-set WiFi password from the label comes with the product. If you don’t have the label from the package, you can find the same information on the device label.)

Preset label in the package

TEW-822DRE

Device label under the device

Press and release the WPS button. (do not hold the button for more than

3 second) or enter the WiFi password printed on the label to fill up the

WiFi password.

© Copyright 2015 TRENDnet. All Rights Reserved.

11

TRENDnet User’s Guide TEW-822DRE

Alternatively, you can connect your computer to the

TEW-822DRE with a network cable.

Connect a network cable (not included in the package) from your computer to the TEW-822DRE’s network port.

3. Open the web browser and type http://tew-822dre or

http://192.168.10.100 to access the administration page. (See trouble shooting page if you cannot access the administration page.)

Enter administrator login information. (The default user name is

admin and the password is admin.)

© Copyright 2015 TRENDnet. All Rights Reserved.

4. The Setup Wizard is prompting on the screen. Click Next.

12

TRENDnet User’s Guide

5. Change your administrator password from the factory default setting and then click Next.

6. Choose manual setting to search and select your wireless router manually and then click on Next. (You can choose WPS to initialize the WPS pairing from the web management page here.

Please see previous section WPS Connection for more detail.)

TEW-822DRE

7. The TEW-822DRE will start searching for available wireless networks.

Select the wireless router or access point you want to connect with and then click Next. (If you don’t find the wireless network you want, click Last to start over the site survey again.)

© Copyright 2015 TRENDnet. All Rights Reserved.

13

TRENDnet User’s Guide

8. Enter the WiFi password and then click Next. (When necessary, check on Show Password to make sure the WiFi password you entered is correct.)

9. Choose the extended wireless network name. By default, the

TEW-822DRE will have the same wireless name (SSID) to your wireless router. All your devices can seamlessly roaming in between TEW-822DRE and your wireless router.

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

In the case that you want to specifically connect to TEW-822DRE or your wireless router, you can setup the extended network with a different name.

Click Next after you choose your extended wireless network name.

10. Confirm the network setup and then click Next.

14

TRENDnet User’s Guide

11. TEW-822DRE will reboot to apply the change. It will take about a minute before TEW-822DRE ready to work.

12. Relocate the TEW-822DRE and plug at a location between wireless router and your computer. Check the signal strength from the location you choose to the wireless router. If the signal strength is 2 bars or more. The signal strength is good from the wireless router.

TEW-822DRE

© Copyright 2015 TRENDnet. All Rights Reserved.

15

TRENDnet User’s Guide TEW-822DRE

Access Point Set Up

The TEW-822DRE comes with pre-set wireless network name and WiFi password. Please find your unique wireless name and pre-set WiFi password from the label comes with the product. If you don’t have the label from the package later time, you can find the same information on the device label.)

Connecting to your computer to TEW-822DRE

1. Choose the TEW-822DRE wireless name from your computer.

2. Press and release the WPS button. (do not hold the button for more than 3 second) or enter the WiFi password printed on the label to fill up the WiFi password.

Preset label in the package

Device label under the device

To start using your TEW-822DRE, just position the operation mode switch to AP. Connect a network cable (not included in the package) home router to the TEW-822DRE’s network port. And, then plug in the TEW-

822DRE to a power socket. Then the dual band wireless is ready to use.

Login to your TEW-822DRE to customize your wireless name, password, and management login password can add on one more layer of network security and which is recommended.

© Copyright 2015 TRENDnet. All Rights Reserved.

16

TRENDnet User’s Guide TEW-822DRE

Range Extender Web Management

System Management and Default Settings

The TEW-822DRE has following settings:

User name: admin

Password: admin

Dafault IP: 192.168.10.100

Access the Management page

Select your preferred language in the TEW-822DRE login page.

The TEW-822DRE default IP address is 192.168.10.100. If you are operating in repeater mode. The management IP is default to dynamic and will be assigned by your router.

Accessing TEW-822DRE with 192.168.10.100:

Make sure your computer is on the same 192.168.100.x/ 255.255.255.0 network. You can setup your computer with a static IP address in this network. For more information on how to setup the static IP address, please see appendix on page 47 .

Accessing TEW-822DRE with dynamic IP:

Make sure your computer is also having the dynamic IP from your home router. To find out the exact IP address of TEW-822DRE, you can check the DHCP client list on your router management page.

Accessing TEW-822DRE with product name:

When your computer is on the same network of TEW-822DRE, you can also use the product name to access the management page. Just enter

“http://tew-822dre” in your browser.

Multi-Language

Select your preferred language in the TEW-822DRE login page.

© Copyright 2015 TRENDnet. All Rights Reserved.

17

TRENDnet User’s Guide TEW-822DRE

System Settings

Main - Wizard

Run the setup wizard again for important setups. If you want to run the setup wizard again in later time, just click the wizard on the main menu of management page and follow through the settings.

Main - Network Settings

Setup your management IP address.

IPv4 Network

Network

Address

Assigned with :

Choose how you want the management IP to be set. Either with dynamic IP or static IP. (Default is set to static IP with 192.168.10.100)

Click Save to save the changes

Dynamic IP

Dynamic IP (DHCP)

IP address : The IPv4 settings are getting from DHCP server automatically and showing here.

© Copyright 2015 TRENDnet. All Rights Reserved.

18

TRENDnet User’s Guide

Static IP

TEW-822DRE

Static IP Address

IP Address : Enter the TEW-822DRE management IP address

Subnet Mask : Management IP network range

Gateway

Address :

Primary DNS

Server :

Secondary DNS

Server :

The default route going out of the network

Enter the primary domain name server IP address

Enter the secondary domain name server IP address

DHCP Server Settings

Enable DHCP

Server :

Check this box to enable DHCP Server on TEW-

822DRE

DHCP IP

Address Range :

Assign a range of IP addresses to allocate through the access point’s DHCP server

Always

Broadcast :

Check this box to enable the DHCP server

Gateway : The default route going out of the network

WINS : Enter the Windows Internet Name Service server address

DNS : Enter the Domain Name Server address

DHCP Lease

Time :

Dynamic DHCP

Client List :

Enter the lease time for allocated IP address

List the clients receiving IP address from TEW-

822DRE DHCP server.

Click Save to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

19

TRENDnet User’s Guide

Main - System

Setup TEW-822DRE system name and changing the administrator’s password.

TEW-822DRE

Password

New password :

Verify

Password:

Show

Password:

Enter the new administrator password here.

Enter the new administrator password again.

Check this box when necessary if you want to make sure the password you have entered is correct.

Click Save Settings to save the changes

Device Name

Device Name : Enter the device name you want to be searched on the network. Changing this device name can change the way to access the TEW-822DRE. For example, if you change the device name to

mydevice, you can then access the TEW-822DRE later time with “http://mydevice”

© Copyright 2015 TRENDnet. All Rights Reserved.

20

TRENDnet User’s Guide

Main - Time Settings

The Time Setting allows you to setup the schedule control and recording the event log correctly.

TEW-822DRE

Current Time

Current

Date/Time :

Time Settings

Enable NTP

Server:

Showing the current date and sets in TEW-

822DRE.

Check this box if you want to synchronize TEW-

822DRE with a network time server.

NTP Server: Enter the address of the time server. (i.e. time.trendnet.com)

Time Zone: Select the time zone of the country you are currently in. The TEW-822DRE will set its time based on your selection.

Enable

Daylight

Saving:

Daylight Saving

Dates:

Check this box if your time zone has daylight savings.

Specify the starting date and end date of daylight savings.

Set the Date and Time Manually

Date and Time: You can also set your date and time manually.

Select the date and time on the list on click on

Copy Your Computer’s Time Settings.

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

21

TRENDnet User’s Guide TEW-822DRE

Main – IPv6 (Access Point Mode)

Setup your IPv6 management IP address.

IPv6

IPv6 Address : Choose the way to assign the IPv6 address: link- local, static, or dynamic (auto-configuration).

Link-Local IPv6 Address

By default, the TEW-822DRE is set to link-local only. You can access the

TEW-822DRE easily with its link-local IPv6 address.

Static IPv6 Address

IPv6 Address Settings

IPv6 Address : Enter the TEW-822DRE management IPv6 address

Subnet Prefix

Length :

Management IPv6 network range

The default route going out of the network

Default

Gateway :

Primary DNS

Server :

Enter the primary domain name server IPv6 address

Secondary DNS

Server :

Enter the secondary domain name server IPv6 address

© Copyright 2015 TRENDnet. All Rights Reserved.

22

TRENDnet User’s Guide

Dynamic IPv6 Address

Choose auto-configuration to get IPv6 address from DHCPv6 dynamically.

IPv6 DNS Settings

DNS Server : Choose “Obtain IPv6 DNS Server address

automatically” or “Use the following IPv6 DNS

server” to specify the way to get domain name service.

Primary DNS

Server :

Enter the primary domain name server IPv6 address

Secondary DNS

Server :

Enter the secondary domain name server IPv6 address

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

23

TRENDnet User’s Guide TEW-822DRE

Wireless (Range Extender Mode)

Site Survey

When TEW-822DRE is operating in Range Extender mode, you can refresh the wireless router link by searching for new wireless network.

Navigate to Wireless and Site Survey to start wireless site survey.

TEW-822DRE will start searching again.

Select the wireless router or access point you want to connect with and then click Next. (If you don’t find the wireless network you want, click Last to start over the site survey again.)

Enter the WiFi password and then click Next. (When necessary, check on

Show Password to make sure the WiFi password you entered is correct.)

Choose the extended wireless network name. By default, the TEW-

822DRE will have the same wireless name (SSID) to your wireless router.

All your devices can seamlessly roaming in between TEW-822DRE and your wireless router.

In case that you want to specifically connect to TEW-822DRE or your wireless router, you can setup the extended network to a different name.

Click Next after you choose your extended wireless network name.

© Copyright 2015 TRENDnet. All Rights Reserved.

24

TRENDnet User’s Guide

Confirm the network setup and then click Next.

TEW-822DRE will reboot to apply the change. It will take about a minute before TEW-822DRE ready to work.

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

25

TRENDnet User’s Guide

Wireless (Access Point Mode) - Basic

Set the TEW-822DRE wireless basic settings. Choose the appropriate wireless band and setup the connection requirements.

TEW-822DRE

2.4GHz/5GHz Wireless Network Settings

Enable

Wireless :

Wireless

Network Name:

Check the box to enable the wireless. And then

ESSID to setup wireless groups.

select the schedule between Always or the time schedule you setup. Click on Add New to add new schedule. (For schedule editing, see page 40

Tools (Access Point Mode) - Schedule for more detail.)

Enter the 2.4GHz Service Set Identifier (SSID).

This SSID is human readable and performs as

802.11 Mode : Select one of the wireless mode to operate.

Choosing more connection modes makes your

AP compatible to more wireless devices. When you for sure that you are not going to have legacy devices online, you can choose narrower connection mode, which can increase the overall speed since the wireless does not have to wait for legacy device working on slower connection mode.

2.4GHz:

5GHz:

© Copyright 2015 TRENDnet. All Rights Reserved.

26

TRENDnet User’s Guide

Wireless

Channel:

Check on Enable Auto Channel Scan to switch wireless channels automatically. Or, uncheck the box to choose the wireless channel manually.

Channel selection can be vary by region.



FCC: 1 -11, 36, 40, 44, 48, 149, 153, 157, 161,

165



ETSI: 1 – 13, 36, 40, 44, 48



ETSI (DFS): 52, 56, 60, 64, 100, 104, 108, 112,

116, 132, 136, 140

Due to regulatory requirements, the DFS wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto channel scan.

Channel Width: Select the channel width setting. If there is not many wireless stations in your space, choose wider bandwidth to take advantage of parallel data transmission. When your wireless environment is crowded, choose 20MHz to limit the bandwidth usage and smooth the connection.

2.4GHz:

5GHz:

Visibility

Status :

Choose visible so your wireless device can search and find the TEW-822DRE network name, or invisible to hide the name from network search.

TEW-822DRE

2.4GHz/5GHz Wireless Security Setting

Security Mode: Choose the way to secure your wireless connection.

None: There is no security on your wireless connection. Adding security on upper network layer is recommended instead of make your network totally opened.

WEP: Basic (Wire Equivalent Privacy). This is a legacy wireless security protocol. Adding security on upper network layer is recommended. Choose the length and type of the key (password) and then enter the key in WEP key 1 field.

Choose Shared Key or both open and shared key in authentication field.

© Copyright 2015 TRENDnet. All Rights Reserved.

27

TRENDnet User’s Guide

WPA-Personal: WiFi Protected Access is a more robust wireless security mechanism.

Select the WPA or WPA2 (recommended) or automatic choose WPA and WPA2 mode and cypher type in TKIP or AES (recommended).

And then enter the key in Pre-shared Key field.

WPA-Enterprise: Instead of using pre-shared key saving on the TEW-822DRE, you can authenticate the connection with RADIUS server.

Select the WPA or WPA2 (recommended) or automatic choose WPA and WPA2 mode and cypher type in TKIP or AES (recommended).

TEW-822DRE

And then enter the RADIUS server IP address, port number and shared secret.

Channel Width: Shows the channel width settings.

Channel: Shows the TEW-822DRE 2.4GHz wireless is currently communicating on which channel.

5GHz Wireless

MAC address: MAC address of TEW-822DRE 5GHz wireless interface.

SSID: Shows current Service Set Identifier is currently in use. This SSID is human readable and performs as ESSID to setup wireless groups.

Security Mode: Shows which type of security encryption is currently in use for this wireless connection.

Channel Width: Shows the channel width settings.

Channel: Shows the TEW-822DRE 5GHz wireless is currently communicating on which channel.

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

28

TRENDnet User’s Guide

Wireless (Access Point Mode) - Advanced

Setting the advanced wireless performance.

TEW-822DRE

Advanced Wireless Settings

Transmit

Power :

Wireless signal transmission power. Choose the lower number when you have crowed wireless devices. So, the TEW-822DRE has toned down signal to prevent wireless interference.

WMM Enable: Check to enable or disable WMM. This is the

Quality of Service (QoS) feature for prioritizing voice and video applications

Short GI : Check this box to enable or disable short guard interval in WiFi negotiation.

IGMP

Snooping :

WLAN

Partition :

HT20/40

Coexistence

Check this box to enable or disable IGMP snooping.

If you check this box, wireless clients associated with this SSID cannot communicate to each other directly, even if they are in the same wireless group.

Check this box to support 20 MHz and 40 MHz coexisting at the same time.

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

29

TRENDnet User’s Guide

Wireless (Access Point Mode) - WPS

WPS is the simplest way to connect a wireless client to the TEW-822DRE.

You don’t have to select the encryption mode and fill in a long encryption passphrase every time you want to setup a wireless connection. Just press a button on both the wireless client and the TEW-822DRE, and WPS will do the rest for you.

The TEW-822DRE has hardware WPS button on the side of the range extender. It also supports two types of software WPS: WPS via Push

Button and WPS via PIN code.

TEW-822DRE

WiFi Protected Setup

Enable : Check this box to enable WPS feature

Lock WPS-PIN

Setup :

Lock/ enable WPS PIN setup

WPS with Personal Identification Number (PIN): Setup the PIN number of the TEW-822DRE by clicking Generate New PIN, check on

Lock WPS-PIN Setup and then click Save Settings to change the PIN.

The current PIN will show on the Current PIN. To restore the PIN number to factory default, just click on Reset PIN to Default.

When you setup the PIN number properly, you can enter the PIN number on your wireless client when setup the WPS PIN wireless connection.

PIN Settings

Current PIN : The PIN number currently holds

Return the PIN number to the factory default.

Reset PIN to

Default :

Generate New

PIN :

Generate a new PIN number randomly

WPS with soft push button: Click on Add Wireless Device with WPS on this page to start WPS push button pairing. Within 2 minutes, push the WPS button on the wireless adapter or in the utility on the wireless computer to join the WPS pairing.

© Copyright 2015 TRENDnet. All Rights Reserved.

30

TRENDnet User’s Guide

Status - System Information

Lists all the TEW-822DRE basic information.

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

System

Firmware

Version :

Showing the current firmware version TEW-

822DRE is running.

Time: Showing the current TEW-822DRE system time.

LAN

Device Mode: The TEW-822DRE is running on Range

Extender (AP Repeater) mode or Access Point

(AP) Mode.

MAC Address: MAC address of the network port.

Connection: How the LAN (management) IP gets its address.

Either in dynamic mode or static mode.

IP Address: IP address of the LAN (management) port.

Subnet Mask: Network range of the management IP

Gateway

Address:

The default router going out from the TEW-

822DRE management network.

2.4GHz Wireless

MAC address: MAC address of TEW-822DRE 2.4GHz wireless interface.

SSID: Shows current Service Set Identifier is currently in use. This SSID is human readable and performs as ESSID to setup wireless groups.

Security Mode: Shows which type of security encryption is currently in use for this wireless connection.

Channel Width: Shows the channel width settings.

31

TRENDnet User’s Guide

Channel: Shows the TEW-822DRE 2.4GHz wireless is currently communicating on which channel.

5GHz Wireless

MAC address: MAC address of TEW-822DRE 5GHz wireless interface.

SSID: Shows current Service Set Identifier is currently in use. This SSID is human readable and performs as ESSID to setup wireless groups.

Security Mode: Shows which type of security encryption is currently in use for this wireless connection.

Channel Width: Shows the channel width settings.

Channel: Shows the TEW-822DRE 5GHz wireless is currently communicating on which channel.

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

32

TRENDnet User’s Guide

Status - Local Logs

All system logs of TEW-822DRE saves locally. Access this page you can quickly and easily browse through or find out the event you are looking for.

TEW-822DRE

Log Options

Log Options: Filter the logs listed in the viewer. Select the kind of log you want to list and click on Apply log

Options Now.

Download

Download

Logs:

Click Download to download the log file from

TEW-822DRE to your computer.

Log Details

Click buttons to control the log page display.



First Page: Click to advance to the first log page



Last Page: Click to advance to the last log page



Previous Page: Click to view the previous log page



Next Page: Click to view the next log page



Clear Log: Click to clear all log entries



Refresh: Click to refresh log entries

© Copyright 2015 TRENDnet. All Rights Reserved.

33

TRENDnet User’s Guide

Status - Statistics

The traffic statistics accumulate the traffic status. By reviewing these numbers, you can easily identify the network problem with specific traffic pattern.

LAN

Traffic through network port :



Sent: Sent from network port.



Received: Received by the network port.



Tx Packets Dropped: How many packets were dropped were delivered from LAN port to other devices.



Rx Packets Dropped: How many packets are dropped delivering from other devices to the

LAN port.



Collisions: How many collision happened on the Ethernet network.

TEW-822DRE

2.4GHz Wireless

Traffic through

2.4GHz wireless network port :



Error: How many traffic errors happened over time.



Sent: Sent from 2.4GHz wireless network port.



Received: Received by the 2.4GHz wireless network port.



Tx Packets Dropped: How many packets are dropped were delivered from 2.4GHz

wireless network port to other devices.



Rx Packets Dropped: How many packets are dropped were delivered from other devices to the 2.4GHz wireless network port.



Collisions: How many collision happened on the 2.4GHz wireless network.



Error: How many traffic errors happened over time on 2.4GHz wireless network.

5GHz Wireless

Traffic through

5GHz wireless network port :



Sent: Sent from 5GHz wireless network port.



Received: Received by the 5GHz wireless network port.



Tx Packets Dropped: How many packets are dropped were delivered from 5GHz wireless network port to other devices.

 Rx Packets Dropped: How many packets are dropped were delivered from other devices to the 5GHz wireless network port.



Collisions: How many collision happened on the 5GHz wireless network.



Error: How many traffic errors happened over time on 5GHz wireless network.

© Copyright 2015 TRENDnet. All Rights Reserved.

34

TRENDnet User’s Guide

Status - Wireless Client List

List all the wireless clients connecting to TEW-822DRE.

2.4GHz/5GHz Wireless Client List

Connected

Shows how long this wireless client connected to

Time :

TEW-822DRE

MAC Address : Shows the Media Access Control number of the wireless client

Status (Access Point Mode) – IPv6

Lost out the IPv6 settings and status.

TEW-822DRE

IPv6 Status

IPv6 : Shows how the IPv6 address is configured

IPv6 Address : Shows the static or dynamic IPv6 address

IPv6 Default

Gateway :

LAN IPv6 Link-

Local Address :

Primary DNS

Address :

Secondary DNS

Address :

Shows the default router going out of the IPv6 network

Shows the Link-Local IPv6 address

Shows the primary IPv6 domain name server IP address.

Shows the secondary IPv6 domain name server

IP address.

© Copyright 2015 TRENDnet. All Rights Reserved.

35

TRENDnet User’s Guide

Access (Access Point Mode) – MAC Filter

Every network device has a unique, 12-digit MAC (Media Access Control) address. Using MAC filters, you can allow or deny specific computers or mobile devices from using this access point’s wireless network. You can setup up to 20 MAC address entries.

TEW-822DRE

MAC Address Filter

Configure MAC filtering below :

Choose the appropriate selection to turn MAC filtering on or off.

MAC Address : Enter the MAC address of the devices you would like to filter. (e.g. 00:11:22:AA:BB:CC)

Schedule : Select the schedule between Always or the time schedule you setup. Click on Add New to add new schedule. (For schedule editing, see page 40

Tools (Access Point Mode) - Schedule for more detail.)

IPv6 Default

Gateway :

Shows the default router going out of the IPv6 network

Shows the Link-Local IPv6 address

LAN IPv6 Link-

Local Address :

Primary DNS

Address :

Secondary DNS

Address :

Shows the primary IPv6 domain name server IP address.

Shows the secondary IPv6 domain name server

IP address.

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

36

TRENDnet User’s Guide TEW-822DRE

Access (Access Point Mode) – Multiple SSID

You can enable multiple wireless network (SSID), up to 4 in each wireless band, creating different wireless credential for different group of users.

Wireless Security

You need to setup the wireless security when you enable a new wireless network. The wireless security settings are all the same. Please reference

Wireless (Access Point Mode) - Basic on page 26 for more setting detail.

Click Save Settings to save the changes

Multiple SSID 2.4GHz/5GHz

Multiple SSID

Index :

Select the SSID you want to edit. By default, the

SSID1 is enabled and SSID 2~4 are disabled.

Enable SSID : Check this box to enable the wireless network

(SSID).

Wireless

Network

Setting the human readable wireless network name (SSID) for identification.

Name :

© Copyright 2015 TRENDnet. All Rights Reserved.

37

TRENDnet User’s Guide TEW-822DRE

Access (Access Point Mode) – User Limit

Limit the maximum wireless users on each band. You can set the limit up to 32 client connection.

Maximum Wireless Clients on 2.4GHz/5GHz

Enable Limit : Check this box to start limiting the number of connections.

Max. Clients : Set the number between 2 and 32 as the number of wireless clients are limited.

Tools - Upload Firmware

Click Upload Firmware on the menu to list associated wireless clients.

TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your TRENDnet model and version. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/

1. If a firmware upgrade is available, download the firmware to your

Computer.

2. Unzip the file to a folder on your computer.

3. Log into the Range Extender (default http://tew-822dre)

4. Click on Tools and then Upload Firmware.

5. Click Browse … and navigate to the folder on your computer in which the unzipped firmware file (.bin) is.

6. Located and select it the firmware file.

7. Click Upload.

© Copyright 2015 TRENDnet. All Rights Reserved.

38

TRENDnet User’s Guide

Tools - Backup Settings

Save System

Settings

Restore System

Settings

Click Save to export settings to your computer.

To restore settings previously saved on your computer, click Choose File to select a configuration file and then click Load to import the previous settings.

Restore Factory

Default Settings

Click Factory Default to restore settings to factory defaults.

System Reboot Click Reboot to reboot your TEW-

822DRE.

TEW-822DRE

Tools - Ping Test

To check your network connection, you can use the PING Test tool from yourTEW-822DRE. Enter the IPv4 address you want to ping and click

Ping. The result will be showed in the terminal down below.

If you are in Access Point operation mode, you can ping the IPv6 address as well. Enter the IPv6 address you want to ping and click Ping.

© Copyright 2015 TRENDnet. All Rights Reserved.

39

TRENDnet User’s Guide TEW-822DRE

Tools (Access Point Mode) - Schedule

Together with other controls, you can set up the schedule to enable or disable that feature. Set up daily or weekly schedule for power saving or security reasons.

Edit a schedule

Click on the Edit icon on the schedule you want to edit. The schedule settings will be copied to the fields above. Change your settings and then click on Update.

Delete a schedule

To delete a schedule, click on the Trash icon on the schedule you want to delete.

Add Schedule Rule

Name : Name the schedule in a comprehensive way.

Days : Check the days of the week you want to schedule applies to.

All Day–24 hrs : Check this box if you want the schedule working through the day.

Time Format : Select the 12 or 24 hour time format

Start time : The starting hour and minute for this schedule

Start time : The stopping hour and minute for this schedule

Click Add to add a schedule entry.

© Copyright 2015 TRENDnet. All Rights Reserved.

40

TRENDnet User’s Guide

Tools - Email Notification

TEW-822DRE can send out email notification when the system log is full.

Enable

Enable Email

Notification:

Check this box if you want to enable the email notification.

TEW-822DRE

Email Notification

From Email

Address:

Enter the email address where the email notification is sending from.

To Email

Address:

Enter the email address to send the logs

Email Subject: Enter the email subject to use when logs are sent

SMTP Server

Address:

Enter the SMTP server address of the email address used

Enter the SMTP port used on the email address

SMTP Server

Port:

Enable

Authentication:

Select this option to authenticate the email address

Security Type: Choose security type between TLS and SSL.

Account Name: Enter the account name used on the email address

Password: Enter the password of the email address used.

Verify

Password:

Enter the password again for verification.

Send Mail Now: Click this button the send the test email immediately.

Notification

Send

Notification when the log is full:

Check this box to send log with email notification automatically.

© Copyright 2015 TRENDnet. All Rights Reserved.

41

TRENDnet User’s Guide TEW-822DRE

Tools - Remote Logging

To save the system log to remote Syslog Server to real time monitor your

TEW-822DRE, you can setup the Syslog Service Settings to send the system log over the network.

Tools - LED Control

All LED indicators are turned on by default. You can turn them off so they are not create weird lighting at night. Check on the LED Disable and then

Save Settings to disable all LEDs.

Syslog Server

Enable Logging to Syslog

Server :

Syslog Server

IP Address:

Check this box to start sending logs remotely to

Syslog server.

Enter the Syslog Server IP address.

Click Save Settings to save the changes

© Copyright 2015 TRENDnet. All Rights Reserved.

42

TRENDnet User’s Guide

Tools - Logout

Logout from the system management securely.

TEW-822DRE

© Copyright 2015 TRENDnet. All Rights Reserved.

43

TRENDnet User’s Guide

Technical Specifications

Wireless

Modulation:

BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with

OFDM

AntennaG: External antenna

Frequency:



FCC: 2.412 - 2.462 GHz, 5.180 - 5.240 GHz, 5.745 -

5.825 GHz

Wireless

Channels:



ETSI: 2.412 - 2.472 GHz, 5.180 - 5.580 GHz, 5.660

- 5.700 GHz



FCC: 1 -11, 36, 40, 44, 48, 149, 153, 157, 161, 165



ETSI: 1 – 13, 36, 40, 44, 48, (52, 56, 60, 64, 100,

104, 108, 112, 116, 132, 136, 140)

Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto.

Data Rate:



802.11ac: up to 867 Mbps (Auto Fallback)





802.11a: up to 54 Mbps

802.11n: up to 300 Mbps (Auto Fallback)



802.11g: up to 54 Mbps



802.11b: up to 11 Mbps

Output

Power:



802.11a: FCC: 22 dBm (typical), CE: 20 dBm

(typical) @ 54 Mbps

Receiving

Sensitivity:



802.11b: FCC: 20 dBm (typical), CE: 20 dBm

(typical) @ 11 Mbps



802.11g: FCC: 27 dBm (typical), CE: 20 dBm

(typical) @ 54 Mbps



802.11n: FCC: 27 dBm (typical), CE: 20 dBm

(typical) @ 300 Mbps



802.11ac: FCC: 26 dBm (typical), CE: 20 dBm

(typical) @ 867 Mbps

 802.11a: -65 dBm (typical) @ 54 Mbps



802.11b: -83 dBm (typical) @ 11 Mbps



802.11g: -65 dBm (typical) @ 54 Mbps

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE



802.11n: -61 dBm (typical) @ 300 Mbps



802.11ac: -51 dBm (typical) @ 867 Mbps

Encryption: 64/128-bit WEP, WPA / WPA2-PSK

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on

interference, network traffic, building materials and other conditions.

44

TRENDnet User’s Guide

Troubleshooting

Situation:

I typed http://tew-822dre but I am not able to access the unit.

What should I do?

Solution:

The host name resolution is good for most systems, including Windows,

OS X, and iOS. Please enter the IP address (default: 192.168.10.100) if you experience difficulty in accessing the range extender.

Proceed following steps for correct name resolution.

1. Turn the TEW-822DRE’s operating mode switch to Extender or

AP.

2. Reset the device to factory default settings by pushing the reset button for 5 seconds.

3. Make sure you have a good wireless connection to the default SSID:

TRENDnet822_5GHz_xxxx, TRENDnet822_2.4GHz_xxxx, or connect to the TEW-822DRE using a network cable. The default wireless password is printed on the device label on same side of the power plug.

4. Make sure your laptop/PC is not joined to any network domain.

5. Open a browser and type http://tew-822dre (You must enter the leading http:// to resolve the text as a host name)

Situation:

How do I reset the device to factory default?

Solution:

1. Use a pin such as a staple to press and hold the reset button at the bottom of the TEW-822DRE for 5 seconds.

2. You can also reset from the management page.

TEW-822DRE

Situation:

I entered http://192.168.10.100 but I am not able to access the unit. What should I do?

Solution:

1. Turn the TEW-822DRE’s operating mode switch to Extender or

AP.

2. Reset the device to factory default settings by pushing the reset button for 5 seconds.

3. Make sure you have a good wireless connection to the default SSID:

TRENDnet822_5GHz_xxxx, TRENDnet822_2.4GHz_xxxx, or connect to the TEW-822DRE using a network cable. The default wireless password is printed on the device label on same side of the power plug.

4. Make sure your computer has no other network connections. For example, if you access TEW-822DRE through wireless, disconnect your Ethernet cable.

5. Open a browser and enter http://192.168.10.100

Situation:

How do I make sure my unit is connected to a router or an AP?

Solution:

The LED will turn solid blue when the TEW-822DRE is successfully connected to a router or an AP.

© Copyright 2015 TRENDnet. All Rights Reserved.

45

TRENDnet User’s Guide

Situation:

How can I access the TEW-822DRE once it is setup?

Solution:

You can use its host name (http://tew-822dre) or IP address to access the

TEW-822DRE. After repeater setup, the TEW-822DRE will get an IP address from your router (DHCP). Check the DHCP client list on your router if you want to access the TEW-822DRE with its IP address.

TEW-822DRE

© Copyright 2015 TRENDnet. All Rights Reserved.

46

TRENDnet User’s Guide

Appendix

How to setup a static IP address on your computer

Note: Before setup, make sure that you have a unique static IP address available

which will not cause the network address collision.

Windows 8

1. Open the Charms bar by moving the mouse to the top right corner of the screen or press the Windows Key + C and click on Search.

2. Type “network” in the search box and click Settings to focus your search.

3. Choose View Network Connections

TEW-822DRE

4. Click Properties on the selected network adapter.

5. Select Internet Protocol Version 4 (TCP/IPv4) and then click

Properties.

© Copyright 2015 TRENDnet. All Rights Reserved.

47

TRENDnet User’s Guide TEW-822DRE

6. Click Use the following address and enter the static IP address and related information. For setting up the TRENDNET PRODUCT, you can enter 192.168.10.10 as your IP address, 255.255.255.0 as the Subnet mask. Leave the other fields blank. Click OK to apply the changes.

Windows 7

1. Click Control Panel from the Start menu.

2. Type “network” in the search box to focus your selection. Click on

Network and Sharing Center

© Copyright 2015 TRENDnet. All Rights Reserved.

48

TRENDnet User’s Guide

3. Click Change adapter settings on the left-hand side.

4. Click Properties on the selected network adapter.

5. Select Internet Protocol Version 4 (TCP/IPv4) and then click

Properties

TEW-822DRE

6. Click Use the following address and enter the static IP address and related information. For setting up the TRENDNET PRODUCT, you can enter 192.168.10.10 as the IP address, 255.255.255.0 as the

Subnet mask. Leave other fields blank. Click OK to apply the changes.

© Copyright 2015 TRENDnet. All Rights Reserved.

49

TRENDnet User’s Guide

OS X

1. Click the Apple logo in the top-left corner of your screen. Click on

System Preferences... . In the Internet and Wireless section, click on Network.

TEW-822DRE

2. Select the network card you want to configure on the left banner

(e.g. Wi-Fi ). Click Advanced.

3. Choose TCP/IP. In Configure IPv4, select Manually. Input the static

IP address, subnet mask, and your router IP address. (In order to setup the TRENDNET PRODUCT, you can put in 192.168.10.10 as the IP address, 255.255.255.0 as the subnet mask and leave router in blank. Click OK to exit advanced setup.

© Copyright 2015 TRENDnet. All Rights Reserved.

50

TRENOnet User's Gu1de

4. Click Apply to apply the changes.

' " ""' 0\11

l < o<

• l , .,.., ( A l: ' ' " ' "

' I

np,c-...

: :_ :.

• c ., t c.

.

• l

:: J ...

.

...

" ' "' " '

I A, I

•

:o j :o ; .

, , .

,. ,.

..: ...

o :o l>

.

. ..

. .

" ...

.

..

...

.

-... ...

.

<>......

' "' " '"" .._

•

.,...

l -N •

, ..

, .., ,

. . .

.

.

.

' "' ' ' : " "" ' ' " "'· · · " ""'"

© Copyright 2015 1RENOnet. All Rights Reserved.

TEW-822DRE

51

TRENDnet User’s Guide

Regulations

Federal Communication Commission Interference

Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

•

•

•

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

TEW-822DRE

IMPORTANT NOTE:

Operation of this device is restricted to indoor use only.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

© Copyright 2015 TRENDnet. All Rights Reserved.

52

TRENDnet User’s Guide

Industry Canada

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Caution:

the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Avertissement:

les dispositifs fonctionnant dans la bande de 5150 à 5250MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

TEW-822DRE

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements

IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

© Copyright 2015 TRENDnet. All Rights Reserved.

53

TRENDnet User’s Guide TEW-822DRE

Europe – EU Declaration of Conformity

TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.

Safety

EN 60950-1:2006+A11:2009+A1:2010+A12:2011 + A2: 2013

IEC 60950-1:2005 (2nd Edition) Am 1:2009

EMC

EN 55022: 2010 + AC: 2011 Class B

EN 55024: 2010

EN 301 489-1 V1.9.2: 09-2011

EN 301 489-17 V2.2.1: 09-2012

Radio Spectrum & Health

EN 300 328 V1.8.1 : 06-2012

EN 301 893 V1.7.1 : 06-2012

EN 62311: 2008

This product is herewith confirmed to comply with the Directives.

Directives

Low Voltage Directive 2006/95/EC

EMC Directive 2004/108/EC

R&TTE Directive 1999/5/EC

Ecodesign Directive 2009/125/EC

RoHS Directive 2011/65/EU

REACH Regulation (EC) No. 1907/2006

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in

France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.

Energy Efficiency

Regulation (EC) No. 1275/2008, Regulation, No. 278/2009, No. 801/2013

© Copyright 2015 TRENDnet. All Rights Reserved.

54

TRENDnet User’s Guide

Česky [Czech] TRENDnet tímto prohlašuje, že tento TEW-822DRE je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES, 2006/95/ES a 2009/125/ES.

Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr

TEW-822DRE overholder de væsentlige krav og øvrige

Deutsch

[German] relevante krav i direktiv 1999/5/EF, 2006/95/EF og

2009/125/EF.

Hiermit erklärt TRENDnet, dass sich das Gerät TEW-822DRE in

Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie

1999/5/EG, 2006/95/EG und 2009/125/EG befindet.

Eesti [Estonian] Käesolevaga kinnitab TRENDnet seadme TEW-822DRE vastavust direktiivi 1999/5/ EÜ, 2006/95/ EÜ ja 2009/125/

EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English Hereby, TRENDnet, declares that this TEW-822DRE is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/CE, 2006/95/CE and

2009/125/CE.

Español

[Spanish]

Ελληνική

[Greek]

Por medio de la presente TRENDnet declara que el TEW-

822DRE cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva

1999/5/CE, 2006/95/CE y 2009/125/CE.

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙ TEW-822DRE

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ

ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK,

Français

[French]

2006/95/EK, 2009/125/ΕΚ και.

Par la présente TRENDnet déclare que l'appareil TEW-822DRE est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE,

2006/95/CE et 2009/125/CE.

Italiano[Italian] Con la presente TRENDnet dichiara che questo TEW-822DRE è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE, 2006/95/CE e

Latviski

[Latvian]

Lietuvių

[Lithuanian]

Nederlands

[Dutch]

2009/125/CE.

AršoTRENDnetdeklarē, ka TEW-822DRE atbilstDirektīvas

1999/5/EK, 2006/95/EK un 2009/125/EK būtiskajāmprasībām un citiemar to saistītajiemnoteikumiem.

Šiuo TRENDnet deklaruoja, kad šis TEW-822DRE atitinka esminius reikalavimus ir kitas 1999/5/EB, 2006/95/EB ir

2009/125/EB Direktyvos nuostatas.

Hierbij verklaart TRENDnet dat het toestel TEW-822DRE in overeenstemming is met de essentiële eisen en de andere

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

Malti [Maltese]

Magyar

[Hungarian]

Svenska

[Swedish]

Polski [Polish] relevante bepalingen van richtlijn 1999/5/EG, 2006/95/EG en

2009/125/EG.

Hawnhekk, TRENDnet, jiddikjara li dan TEW-822DRE jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/KE, 2006/95/KE u

2009/125/KE.

Alulírott, TRENDnet nyilatkozom, hogy a TEW-822DRE megfelel a vonatkozó alapvetõ követelményeknek és az

1999/5/EK, 2006/95/EK és a 2009/125/EK irányelv egyéb elõírásainak.

Niniejszym TRENDnet oświadcza, że TEW-822DRE jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/WE, 2006/95/WE i

2009/125/WE.

TRENDnet declara que este TEW-822DRE está conforme com os requisitos essenciais e outras disposições da

Português

[Portuguese]

Slovensko

[Slovenian]

Directiva1999/5/CE, 2006/95/CE e 2009/125/CE.

TRENDnet izjavlja, da je ta TEW-822DRE v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive1999/5/ES, 2006/95/ES in 2009/125/ES.

Slovensky

[Slovak]

TRENDnettýmtovyhlasuje, že TEW-822DRE spĺňazákladnépožiadavky a všetkypríslušnéustanovenia

Smernice 1999/5/ES, 2006/95/ES a 2009/125/ES.

Suomi [Finnish] TRENDnet vakuuttaa täten että TEW-822DRE tyyppinen laite on direktiivin1999/5/EY, 2006/95/EY ja 2009/125/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Härmed intygar TRENDnet att denna TEW-822DRE står I

överensstämmelse med de väsentliga egenskapskrav och

övriga relevanta bestämmelser som framgår av direktiv

1999/5/EG, 2006/95/EG och 2009/125/EG.

RoHS

This product is RoHS compliant.

55

TRENDnet User’s Guide

ErP Statement

Česky [Czech] Toto síťové zařízení je rok Energy Související produkt (ErP ou dopisem), automaticky přepne do úsporného pohotovostního módu do 10 minut bez datového přenosu síly. Když přístroj nepoužíváte, lze jej ict vypnut pomocí tlačítka napájení, nebo jednoduše odpojte napájecí adaptér pro další úspory energie.

Síťové standby: 4,79W

Off Mode: 0,16W

Dansk [Danish] Denne netværksenhed er år Energy Related Produkt (ErP ou ved brev) skifter automatisk til en strømbesparende standby mode Inden for 10 minutter uden datatransmission. Når apparatet ikke er i brug kan det være ict drevet ned ved hjælp afbryderknappen, eller blot afbryde strømforsyningen til yderligere energibesparelser.

Networked standby: 4.79 watt

Slukket tilstand: 0.16. watt

Dieses Netzwerkgerät ist ein Energy Related Product (ErP), Deutsch

[German] das innerhalb von 10 Minuten ohne Datenübertragung automatisch in einen Stromsparmodus umschaltet. Wenn das

Gerät nicht verwendet wird, kann es über die Ein-/Austaste heruntergefahren werden, oder ziehen Sie für zusätzliche

Stromersparnis das Netzgerät aus der Steckdose.

Vernetzt und in Bereitschaft: 4.79 Watt

Ausgeschaltet: 0.16 Watt

Eesti [Estonian] See võrguseade on aasta Energy Related Toode (ERP ou kirjas)

Automaatselt lülitub energiasäästurežiimi ooterežiimis mood

10 minuti jooksul ei andmeedastust. Kui seade ei ole kasutuses võib see olla IKT väljalülitamisel kasutades toitenuppu või lihtsalt ühendage toiteadapter täiendava energiasäästu.

Võrku ooterežiimis: 4.79W

Väljalülitatud olek: 0.16W

English This network device is an Energy Related Product (ErP) that automatically switches to a power saving standby mode within 10 minutes of no data transmission. When the device is not in use it can be powered down using its power button, or simply disconnect the power adapter for additional energy savings.

Networked standby mode:4.79 watts

Off mode: 0.16 watts

Español

[Spanish]

Este dispositivo de red es un producto relacionado con la energía (ErP) que pasa automáticamente a un modo en espera, de ahorro de energía, tras 10 minutos de ausencia de transmisión de datos. Cuando el dispositivo no está en uso, se

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

Ελληνική

[Greek]

Lietuvių

[Lithuanian] puede apagar utilizando el botón de alimentación, o simplemente desconectar el adaptador de corriente para optimizar el ahorro de energía.

Modo de espera en red: 4.79W

Modo apagado: 0.16W

Αυτή η συσκευή δικτύου είναι η χρονιά Ενέργειας Σχετικά

Προϊόν (ERP ou με επιστολή) μεταβαίνει αυτόματα σε

κατάσταση εξοικονόμησης μόδας Μέσα σε 10 λεπτά χωρίς

μετάδοση δεδομένων εξουσία. Όταν η συσκευή δεν είναι σε

χρήση μπορεί να ΤΠΕ κινούνται προς τα κάτω

χρησιμοποιώντας το κουμπί τροφοδοσίας, ή απλά

αποσυνδέστε το τροφοδοτικό για πρόσθετη εξοικονόμηση

ενέργειας.

Δικτυωμένη αναμονής: 4.79 watts

Κατάσταση εκτός λειτουργίας: 0.16watts

Ce périphérique réseau est un Energy Related Product (ErP) Français

[French]

Italiano[Italian] Questo apparato di rete è un Energy Related Product (ErP) il quale commuta automaticamente in una modalità standby entro 10 minuti dall’interruzione della trasmissione di dati.

Quando l’apparato non viene utilizzato, può essere spento tramite il tasto di accensione, o si può scollegare l’alimentatore, per ottenere un maggior risparmio di energia.

Modalità standby in rete: 4.79watt

Modalità spento: 0.16watt

Latviski

[Latvian] qui passe automatiquement en mode veille, économisant l’énergie, après 10 minutes sans transfert de données. Lorsque le périphérique n’est pas utilisé, il peut être éteint en utilisant le bouton d’alimentation, ou simplement déconnecté en débranchant l’adaptateur secteur pour obtenir davantage d’économies d’énergie.

Mode veille en réseau : 4.79Watt

Mode éteint : 0.16Watt

Šis tīkls ierīce ir gads enerģiju saistītiem ražojumiem (ERP ou ar vēstuli) Automātiski pārslēdzas uz enerģijas taupīšanas gaidstāves modi laikā 10 minūšu laikā bez datu pārraides. Ja ierīce nav izmantota to var IKT powered leju, izmantojot barošanas pogu, vai vienkārši atvienojiet strāvas adapteris papildu enerģijas ietaupījumu.

Networked gaidīšanas: 4.79vati

Izslēgts režīms: 0.16vati

Šis tinklas įrenginys metus Energijos susiję produktai (ERP ou laišku) Automatiškai persijungia į energijos taupymo budėjimo mados Per 10 minučių be duomenų perdavimo. Kai prietaisas nenaudojamas, jis gali būti ict išjungtas naudojant maitinimo

56

TRENDnet User’s Guide

Nederlands

[Dutch] mygtuką, arba tiesiog atjunkite maitinimo adapterį sutaupyti dar daugiau energijos.

Tinklo budėjimo: 4.79W

Išjungimo būsena: 0.16W

Dit netwerkapparaat is jaar-energie gerelateerde product (ErP ou per brief) schakelt automatisch naar een energiebesparende stand-by mode Binnen 10 minuten geen gegevensoverdracht.

Wanneer het apparaat niet in gebruik kan worden ict uitgeschakeld met behulp van uit-knop, of koppelt gewoon een oplader voor een extra energiebesparing.

Networked standby: 4.79watt

Off Mode: 0.16watt

Malti [Maltese] Dan il-mezz netwerk huwa sena Enerġija Prodott Related (ERP ou b'ittra) Awtomatikament swiċċijiet għal iffrankar ta

'enerġija moda standby Fi żmien 10 minuta ta' l-ebda trażmissjoni tad-data. Meta l-mezz ma jkunx qed jintuża jista

Magyar

[Hungarian]

Polski [Polish]

Português

[Portuguese]

'jiġi ICT powered isfel bl-użu buttuna l-enerġija, jew sempliċiment skonnettja l-adapter enerġija għal iffrankar addizzjonali tal-enerġija.

Standby f'netwerk: 4.79watts

Modalità Mitfija: 0.16watts

Ez a hálózat a készülék éves energiával kapcsolatos termék

(ErP ou levélben), automatikusan átvált egy energiatakarékos készenléti mód 10 percen belül nincs adatátvitel. Ha a készülék nincs használatban, akkor lehet, IKT áramtalanítani a bekapcsoló gombot, vagy egyszerűen húzza ki a hálózati adaptert a további energia-megtakarítás.

Hálózatba készenlét: 4.79watt

Kikapcsolt üzemmód: 0.16watt

To urządzenie sieciowe jest rok energetyczna produktu związanego (ErP ou listownie) automatycznie przełącza się na energooszczędny gotowości modę W ciągu 10 minut bez transmisji danych. Kiedy urządzenie nie jest używane, można go ICT wyłączony za pomocą przycisku zasilania, lub po prostu odłączyć zasilacz na dodatkowe oszczędności energii.

Networked standby: 4.79watów

Tryb wyłączenia: 0.16watów

Este dispositivo de rede é um Produto de Consumo de Energia

(ErP) que alterna automaticamente para modo de espera com economia de energia após 10 minutos sem transmissão de dados. Quando o dispositivo não está sendo usado pode ser desligado no botão de energia, ou simplesmente desligando o adaptador de corrente para economia de energia adicional.

Modo de espera em rede: 4.79watts

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

Slovensko

Slovensky

[Slovak]

[Slovenian]

Modo off: 0.16watts

Ta mreža naprava je leto Energy Podobni izdelek (ErP ou z dopisom), samodejno preklopi na varčevanje z energijo v stanju pripravljenosti moda roku 10 minut brez prenosa podatkov. Ko je naprava ni v uporabi, je lahko ict napaja navzdol z gumbom za vklop, ali pa preprosto odklopite napajalnik za dodatne prihranke energije.

Networked pripravljenosti: 4.79W

Način izklopa: 0.16W

Toto sieťové zariadenie je rok Energy Súvisiaci produkt (ErP ou listom), automaticky prepne do úsporného pohotovostného módu do 10 minút bez dátového prenosu sily. Keď prístroj nepoužívate, možno ho ict vypnutý pomocou tlačidla napájania, alebo jednoducho odpojte napájací adaptér pre ďalšie úspory energie.

Sieťové standby: 4,79W

Off Mode: 0,16W

Suomi [Finnish] Tämä verkkolaite on vuosi Energy Related Product (ErP ou kirjeitse) Automaattinen vaihto virransäästö valmiustilassa muoti 10 minuutin kuluessa tiedon siirto. Kun laite ei ole käytössä se voidaan ICT sammutettu käyttämällä virtakytkintä, tai yksinkertaisesti irrota virtalähde ylimääräisiä energiasäästöjä.

Verkottunut valmiustilassa: 4.79wattia

Svenska

[Swedish]

Pois päältä -tila: 0.16 wattia

Denna nätverksenhet är år Energy relaterad produkt (ErP ou per brev) Växlar automatiskt till ett energisparande vänteläge mode Inom 10 minuter utan dataöverföring. När enheten inte används kan det vara ict avstängd med hjälp av strömbrytaren, eller helt enkelt koppla loss nätadaptern för ytterligare energibesparingar.

Networked standby: 4.79watt

Avstängd: 0.16watt

57

TRENDnet User’s Guide

Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.



TEW-822DRE – 3 Years Warranty

If a product does not operate as warranted during the applicable warranty period,

TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase.

All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of purchase for their return policies.

TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty.

There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use

(iii) the product was subject to conditions more severe than those specified in the manual.

Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization

(RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to

TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and

Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.

WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE

AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT

TRENDNET’S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES

AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,

EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,

© Copyright 2015 TRENDnet. All Rights Reserved.

TEW-822DRE

STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO

ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE,

INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.

TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING

AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT

DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S

MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED

ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE

OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER

HAZARD.

LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW

TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,

WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR

INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES

OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS

OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR

IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,

PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH

DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND

OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF

LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED

HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Governing Law: This Limited Warranty shall be governed by the laws of the state of California.

Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License (“GPL”) or

GNU Lesser General Public License (“LGPL”).

Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or

LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for specific terms of each license.

10/27/2015

58