SAMSUNG P1401, P1201, P1001, P801 washing machine SERVICE Manual

P1401, P1201, P1001, P801 washing machines are designed for efficient and effective laundry care. Featuring various wash programs, including Cotton, Colour, Synthetic, Delicate, Wool, Quick, Rinse+Spin, and Spin, you can select the ideal setting for your laundry needs. These models also offer multiple spin speed options, allowing you to customize the drying process to your preferences.

PDF
Document
SAMSUNG Washing Machine P1401, P1201, P1001, P801 SERVICE Manual | Manualzz

Advertisement

Advertisement

WASHING MACHINE
P1401
P1201
P1001
P801
SERVICE Manual
WASHING MACHINE CONTENTS
Caution for the safety during servicing
1. SPECIFICATIONS
2. OVERVIEW OF THE WASHING MACHINE
3. OVERVIEW OF THE CONTROL PANEL
4. GENERAL ERROR FUNCTION
5. TROUBLE DIAGNOSIS
6. TEST MODE
7. DESIGNATION OF MAIN COMPONENTS
8. PCB SCHEMATIC DIAGRAM
PCB CIRCUIT DIAGRAM
9.ASSEMBLE AND DISASSEMBLE
10.TOOLS FOR DISASSEMBLY AND ASSEMBLY
11.EXPLODED VIEW AND PARTS LIST
2 SAMSUNG ELECTRONICS CO., LTD
Caution for the safety during servicing
1. Do not allow the customer to repair the product.
 The person may be injured or the product life may be shortened.
2. Execute A/S after unplugging the power supply unit.
 Be care of the electric shock.
3. Do not plug several plugs in the same outlet.
 It may cause the fire due to overheat.
4. Check the damage, pressing or burning of the power plug or outlet.
 Replace it promptly if it has problem.(It may cause the electric shock or fire)
5. Do not clean the main body with the water.
 It may cause the electric shock and fire and shorten the product life)
6. The wiring of the harness shall be free from the moisture and tightened during serving.
 It shall not be deviated by certain impact.
7. Remove any dust or filth on the housing section,wiring section,connection section during servicing.
 Protect the cause of the fire such as the tracking,shortage and etc.
8. Check any mark of the moisture on the electrical parts, harness section and etc.
 Replace the parts or remove the moisture.
9. Check the assembly status of the parts after servicing.
 Maintain the status before servicing.
10. Pull out the power cord with holding the plug.
 Be care of the electric shock and fire when the cord is damaged.
11. Unplug the power plug from the outlet when the wash machine is not used.
 Be care of the electric shock and fire due to the strike of the lightening.
12. Do not use or store the spray or flammable materials(including gasoline,alcohol and etc.)
around the wash machine.
 Be care of the explosion or fire due to the electric spark.
13. Do not put the bowl of water or wet laundry on the wash machine.
 If the water is penetrated to the wash machine, this may cause the electric shock or fire.
14. Do not install the wash machine in the place where the snow or rain falls.
 It may cause the electric shock and fire and shorten the product life.
15. Do not push the control buttons with the awl,pin, or sharp materials.
 It may the electric shock and trouble.
16. Check the wash machine is leveled horizontally and installed properly on the floor.
 The vibration may shorten the product life.
17. Joint the wire by the connector correctly.
 When the wire is jointed by the tape, this may cause the fire due to the tracking.
18. When the wash machine is to be laid for the service, put the pad on the floor and lay the
product at side slowly.
 If the wash machine is laid front, the relay may be damaged by the tub.
19. When the wash-heater is replaced, check it is inserted in the bracket-heater and screw the nut.
 If the wash-heater is not inserted in the bracket-heater properly, this may cause the noise and
leakage since it is contacted to the drum.
1. Specifications
SAMSUNG ELECTRONICS CO., LTD 3
WASH TYPE FRONT LOADING TYPE
DIMENSION GROSS W 680mm X D 665mm X H 892mm
NET W 598mm X D 550mm X H 844mm
WATER PRESSURE 50 kPa ~ 800 kPa
WEIGHT GROSS 80 kg
NET 75 kg
WASH and SPIN CAPACITY 5.5 kg (DRY LAUNDRY)
POWER CONSUMPTION WASHING 220 V 180 W
240 V 180 W
WASHING and 220 V 2000
HEATING 240 V 2400
MODEL P1401 P1201 P1001 P801
SPIN 220-240V 550W 500W 500W 430W
PUMPING 34 W
WATER CONSUMPTION 49l (STANDARD COURSE)
MODEL P1401 P1201 P1001 P801
rpm 1400 1200 1000 800
SPIN REVOLUTION
2. Overview of the Washing Machine
4 SAMSUNG ELECTRONICS CO., LTD
/

Advertisement

Key features

  • Front loading

  • Multiple wash programs

  • Different spin speed levels

  • Adjustable water temperature

  • Error detection system

Frequently asked questions

Use the program button to cycle through the available wash options. The options include Cotton, Colour, Synthetic, Delicate, Wool, Quick, Rinse+Spin, Spin.

The spin speeds for the P1201 model are no, rh, 400, 600, 800, 1000, and 1200 rpm.

The E4 error message indicates that the laundry load is unbalanced. You can fix this by loosening any tangled laundry or by putting the laundry in more uniformly.

Press and hold “1” and “2” keys simultaneously and then press POWER S/W “4” on. After 3 seconds the display will show “tl”. Once in TEST MODE, press the “3” key to begin driving compartment test.

If the power goes out during a wash cycle, the process before the power outage is saved to the EEPROM. When the power returns the washer will continue from the process point where the power went out. If the power outage occurred during a rinse or drain cycle, the process will start from the beginning of the cycle.

Preparing document for printing…
0%