RED. DAB digital portable/mains FM radio User manual

Below you will find brief information for DAB digital radio. The RED. DAB digital radio is a portable/mains radio that allows you to listen to digital radio stations in DAB mode and analogue radio stations in FM mode. This radio has a built-in antenna and can be powered by batteries or a mains adaptor. You can also use headphones to listen to your favourite stations.

PDF
Document
RED. DAB digital radio user manual | Manualzz

Advertisement

Advertisement

page 2
G e t t i n g
Know your radio1
LCD screen
TUNING DIAL
(turn and press)
VOLUME up
DAB mode or
FM mode
VOLUME down
MENU button
(see page 6)
INFO button
(see page 5)
PRESET
buttons
use with SHIFT button (see page 4)
SCAN button
(see opposite)
battery compartment headphone connector
Warning: Do not turn your radio
on with the headphones connected
and the earpieces in your ears.
Warning: See the Safety
Notes on the back page.
external power
connector
on /off
switch aerial
page 3
S t a r t e d
Batteries or mains adaptor
The radio can be powered by batteries (not supplied), or by the mains
adaptor (use only part number KG4A-12-850D, supplied). If you are going
to use the mains adaptor all the time, you do not need to fit batteries. The radio
saves all its settings when switched off, but it doesn’t need batteries to do this.
If you are using batteries, insert six ‘C’ size
batteries, taking care to fit them the right
way round, as shown here.
When you first switch on
The first time you switch on your new
radio, it will switch to DAB mode and
automatically scan to find what digital
stations are available.
When all available stations are found, the
radio will sort them alphabetically and tune
to the first in the list.
2
3
Tuning
To see what other stations are in the station
list, turn the TUNING DIAL in either
direction. The station names will appear
one at a time at the bottom of the LCD
screen. When you see the name of the
station you want to listen to, press the dial.
To add new stations to the station list, press
the SCAN button – a short press for a local
scan, a long press for a full Band III scan.
FM mode
To flip between DAB mode and FM mode,
press the DAB/FM button.
In FM mode, tune the radio by turning the
TUNING DIAL in either direction. Or press
the SCAN button to automatically search for
a station in the direction you last tuned.
4
press...
turn...
page 4
M o r e a b o u
Tuning to a preset station
Press the PRESET button for the station you wish to listen to.
• For stations 1–5, press the numbered button, for example:
• For stations 6–10, press the SHIFT button and hold it in whilst you press
the numbered button, for example:
Note – The first time you switch your new radio on, or straight after a
Factory Reset (see page 7), there will be no preset stations stored.
1
Assigning a station to a preset button
Tune to the station that you want to save.
Press the PRESET button that you wish to
use for this station, and hold it in. Wait
until the message “Preset saved” is
displayed, then release the button.
You can store up to ten stations in DAB mode, and another ten in FM
mode. Your DAB preset stations will only be available when in DAB
mode, and your FM preset stations when in FM mode.
When you are scrolling through the DAB
station list, any preset stations will be
marked with their preset number.
2
preset station 2
preset station 7
press...
/

Advertisement

Key features

  • DAB and FM modes

  • Preset stations for easy access

  • Automatic station scan

  • LCD screen for station information

  • Battery or mains power

  • Headphone jack

  • Signal strength meter

  • Software version display

  • Factory reset option

Frequently asked questions

The radio can be powered by batteries (not supplied) or by the mains adaptor (use only part number KG4A-12-850D, supplied).

In DAB mode, turn the TUNING DIAL to see the station names, and press the dial to select. In FM mode, turn the TUNING DIAL or press the SCAN button.

Tune to the station you want to save, press and hold the desired preset button until "Preset saved" is displayed.

Press the INFO button repeatedly to cycle through different information items.

Press and hold the MENU button for two seconds, then press the TUNING DIAL to confirm.

User questions

C P

Michael C.

How to disable the alarm?

No votes

The viewed document does not contain information on how to disable the alarm. Specific instructions cannot be provided, and it is risky to provide general instructions for specific devices. Refer to the device's manual for accurate information.

Preparing document for printing…
0%