Generac 24 kW G0072100 Standby Generator Manual

Generac 24 kW G0072100 is a powerful and reliable air-cooled generator that can provide backup power to your home or business. With its 24 kW of power, it can run essential appliances and equipment, including refrigerators, freezers, air conditioners, and sump pumps. The G0072100 is also equipped with a number of features that make it easy to use and maintain.

PDF
Document
Generac 24 kW G0072100 Standby Generator Manual | Manualzz

Advertisement

Advertisement

Owner’s Manual
60 Hz Air-Cooled Generators
10 kW to 24 kW
SAVE THIS MANUAL FOR FUTURE REFERENCE
®

Para español, visita: http://www.generac.com/service-support/product-support-lookup
Pour le français, visiter : http://www.generac.com/service-support/product-support-lookup
Register your Generac product at:
WWW.GENERAC.COM
1-888-GENERAC
(888-436-3722)
(000209b)
WARNING
Loss of life. This product is not intended to
be used in a critical life support application.
Failure to adhere to this warning could result
in death or serious injury.
ii Owner’s Manual for 60 Hz Air-Cooled Generators
Use this page to record important information about this generator.

Model:
Serial:
Production Date:
Volts:
LPV Amps:
NG Amps:
Hz:
Phase:
Controller P/N:
STA MAC ID:
SSID:

Record the information found on the unit data label on this

page. See
General Information for the location of the unit
data label. The unit has a label plate affixed to the inside par
-
tition, to the left of the control panel console as shown in
Fig-
ure 2-1
, Figure 2-2, or Figure 2-3. See Operation for
directions on how to open the top lid and remove the front
panel.

Always supply the complete model and serial numbers of the
unit when contacting an Independent Authorized Service
Dealer (IASD) about parts and service.

Operation and Maintenance: Correct maintenance and
care of the unit ensures a minimum number of problems, and
keeps operating expenses at a minimum. It is the operator’s
responsibility to perform all safety inspections, to verify all
maintenance for safe operation is performed promptly, and
to have the equipment inspected periodically by an IASD.
Normal maintenance, service, and replacement of parts are
the responsibility of the owner/operator and are not consid
-
ered defects in materials or workmanship within the terms of
the warranty. Individual operating habits and usage may con
-
tribute to the need for additional maintenance or service.

When the generator requires servicing or repairs, Generac
recommends contacting an IASD for assistance. Authorized
service technicians are factory-trained and are capable of
handling all service needs. To locate the nearest IASD,
please visit the dealer locator at:

www.generac.com/Dealer-Locator.

(000393a)
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
Owner’s Manual for 60 Hz Air-Cooled Generators iii
Table of Contents
Section 1: Safety Information
Introduction ..................................................................1
Read This Manual Thoroughly ....................................1
Safety Rules .................................................................1
How to Obtain Service .................................................1
General Hazards ...........................................................2
Exhaust Hazards ..........................................................3
Electrical Hazards ........................................................3
Fire Hazards .................................................................3
Explosion Hazards .......................................................4
Battery Hazards ............................................................4
Section 2: General Information
Generator Components and Control Locations ........7
Data Decals .................................................................10
Specifications .............................................................11
Generator ..................................................................11
Engine .......................................................................11
Protection Systems ...................................................12
Emissions ...................................................................12
Fuel Requirements .....................................................12
Battery Requirements ................................................12
Battery Charger ..........................................................12
Engine Oil Requirements ..........................................12
Activating the Generator ...........................................13
Wi-Fi Module ...............................................................13
Replacement Parts .....................................................13
Accessories ................................................................13
Section 3: Operation
Site Prep Verification .................................................15
Generator Enclosure .................................................15
Opening the Lid .........................................................15
Front Access Panel Removal ....................................15
Intake Side Panel Removal .......................................16
Main Line Circuit Breaker (Generator Disconnect) ....16
LED Indicator Lights ..................................................16
Auxiliary Shutdown Switch .......................................17
Control Panel Interface ..............................................17
Using the AUTO/OFF/MANUAL Buttons ..................17
Operating Modes ........................................................18
Interface Menu Displays ............................................18
LCD Panel .................................................................18
Menu System Navigation ..........................................19
Setting the Exercise Timer ........................................21
Battery Charger ..........................................................21
Manual Transfer Operation .......................................21
Transfer to Generator Power Source ........................21
Transfer to Utility Power Source ................................22
Automatic Transfer Operation ..................................22
Automatic Sequence of Operation ...........................22
Utility Failure ..............................................................22
Cranking ....................................................................22
Cold Smart Start ........................................................22
Cleaning Cycle ..........................................................22
Load Transfer ............................................................23
Shutting Generator Down While Under Load
or During a Utility Outage .........................................23
Section 4: Maintenance
Maintenance ...............................................................25
Preparing for Maintenance ........................................25
Performing Scheduled Maintenance ........................25
Service Schedule .......................................................26
Maintenance Log .......................................................26
Checking Engine Oil Level ........................................27
Engine Oil Requirements ..........................................27
Changing the Oil and Oil Filter .................................27
Servicing the Air Cleaner ..........................................28
Spark Plug(s) ..............................................................29
Valve Clearance Adjustment .....................................29
Checking Valve Clearance ........................................29
Adjusting Valve Clearance ........................................30
Battery Maintenance ..................................................30
Inspecting the Battery ................................................31
Cleaning the Sediment Trap .....................................32
Post Maintenance Checks .........................................32
Performing Fuel System Leak Test ...........................33
Attention After Submersion ......................................33
Corrosion Protection .................................................33
Remove From and Return To Service Procedure ...33
Remove From Service ...............................................33
Return to Service .......................................................34
Section 5: Troubleshooting / Quick
Reference Guide
Generator Troubleshooting ......................................35
Quick Reference Guide .............................................37
Table of Contents
iv Owner’s Manual for 60 Hz Air-Cooled Generators
This page intentionally left blank.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
/

Advertisement

Key features

  • 24 kW of power can run essential appliances and equipment

  • Automatic transfer switch provides seamless backup power

  • Cold Smart Start technology for easy starting in cold weather

Frequently asked questions

To activate the generator, simply turn the key to the "on" position.

To check the engine oil level, remove the oil dipstick, wipe it clean, reinsert it, and then remove it again. The oil level should be between the "full" and "add" marks on the dipstick.

To change the oil and oil filter, first drain the oil from the engine. Then, remove the old oil filter and install a new one. Finally, add new oil to the engine, checking the oil level regularly to ensure that it is between the "full" and "add" marks on the dipstick.

User questions

L T

John L.

Where is the maintenance log located?

The maintenance log is on page 26. It's a table with columns for Date, Maintenance Performed, Next Scheduled Maintenance, Signature, and Comments.

C A

Michael C.

How to reset the indicator light?

To clear an active alarm, press the OFF button on the control panel, then the ENTER button, and finally the AUTO button.

F A

John F.

What are the replacement part numbers for the air and oil filters for different generator models?

The replacement part numbers for air and oil filters depend on the generator model:

  • 10 kW:
    • Oil filter: 070185E
    • Air filter: 0E9371A
  • 13 kW and 16 kW:
    • Air filter: 0J8478
  • 20 kW, 22 kW, and 24 kW: No information about filters is provided.
C A

Michael C.

How to reset the alarm indicator light?

To clear an active alarm, press the OFF button on the control panel, then the ENTER button, and finally the AUTO button.

C V

Robert C.

What are the load and circuit requirements for the Generac 24KW Standby Generator?

The generator has a rated maximum load current of 100.0 amps at its rated voltage with LP fuel. The main line circuit breaker (generator disconnect) for this model is 100 amp.

L T

John L.

Where is the Maintenance Log located in the manual, and what information does it contain?

The Maintenance Log is located on page 26. It includes columns for Date, Maintenance Performed, Next Scheduled Maintenance, Signature, and Comments.

Preparing document for printing…
0%