Monnit Ethernet Gateway 3 Users Guide
โฆษณา
โฆษณา
Monnit Wireless Sensors
and Ethernet Gateway
User?s Guide
For Use With iMonnit Online Software
and iMonnit Express PC Software
MonnitLink? Ethernet Gateway Quick Start
- Create a Monnit user account with assigned wireless gateways and sensors.
- Attach the antenna to the antenna connector on the back panel of the Ethernet gateway
(make sure the connection is snug, but do not over tighten).
- Plug an Ethernet cable with internet connectivity into the gateway.
- Plug the power supply into a power outlet then connect to the gateway.
- Once all three lights turn green, your network is ready to bring sensors online.
and Ethernet Gateway
User?s Guide
For Use With iMonnit Online Software
and iMonnit Express PC Software
MonnitLink? Ethernet Gateway Quick Start
- Create a Monnit user account with assigned wireless gateways and sensors.
- Attach the antenna to the antenna connector on the back panel of the Ethernet gateway
(make sure the connection is snug, but do not over tighten).
- Plug an Ethernet cable with internet connectivity into the gateway.
- Plug the power supply into a power outlet then connect to the gateway.
- Once all three lights turn green, your network is ready to bring sensors online.
I. CREATE AN IMONNIT USER ACCOUNT
If this is your first time using the iMonnit online system site, you will need to create a new
account. If you have already created an account, you can skip to the ?Logging into the
Online System? section. The following instructions will guide you through the account.
1. Open iMonnit in your mobile app or web browser.
2. Navigate your cursor down to the bottom of the login box and select ?Add Account?.
3. Next you will be asked to enter your account information in the following fields.
Note: If this is a Free Trial, you may not have received a subscription code yet. Leave the box blank and proceed.
If this is your first time using the iMonnit online system site, you will need to create a new
account. If you have already created an account, you can skip to the ?Logging into the
Online System? section. The following instructions will guide you through the account.
1. Open iMonnit in your mobile app or web browser.
2. Navigate your cursor down to the bottom of the login box and select ?Add Account?.
3. Next you will be asked to enter your account information in the following fields.
Note: If this is a Free Trial, you may not have received a subscription code yet. Leave the box blank and proceed.
4. When completed, select the ?Next? button.
5. This step will complete the user registration process and lead you into registering your
device. You will be able to log out and log back in with your credentials to complete the
setup at any time.
LOGGING INTO THE ONLINE SYSTEM
1. Open iMonnit in your mobile app or web browser.
2. Enter your user name and password.
3. Select the ?Login? button.
REGISTERING THE DEVICE
1. You will need to enter the Device ID and the Security Code from your device in the
corresponding text boxes.
2. Use the camera on your smartphone to scan the QR code on your Gateway.
3. If you do not have a camera on your phone, or the system is not accepting the QR code,
you may enter the Device ID and Security Code manually.
- The Device ID is a unique number located on each device label. It will be labeled
as ?ID? on your gateway.
- Next you?ll be asked to enter the Security Code (SC) on your device. A security
code will be all letters, no numbers. It can also be found on the barcode label of
your gateway.
4. When completed, select the ?Submit? button.
5. This step will complete the user registration process and lead you into registering your
device. You will be able to log out and log back in with your credentials to complete the
setup at any time.
LOGGING INTO THE ONLINE SYSTEM
1. Open iMonnit in your mobile app or web browser.
2. Enter your user name and password.
3. Select the ?Login? button.
REGISTERING THE DEVICE
1. You will need to enter the Device ID and the Security Code from your device in the
corresponding text boxes.
2. Use the camera on your smartphone to scan the QR code on your Gateway.
3. If you do not have a camera on your phone, or the system is not accepting the QR code,
you may enter the Device ID and Security Code manually.
- The Device ID is a unique number located on each device label. It will be labeled
as ?ID? on your gateway.
- Next you?ll be asked to enter the Security Code (SC) on your device. A security
code will be all letters, no numbers. It can also be found on the barcode label of
your gateway.
4. When completed, select the ?Submit? button.
II. USING THE MONNITLINK? ETHERNET GATEWAY
1. Understanding the Ethernet Gateway Lights
Light 1 - Indicates the Ethernet cable is plugged in. A green light indicates
ready and working, a red light indicates there is a problem.
Light 2 - Indicates the Ethernet has internet connectivity and can reach the
online monitoring system. A green light indicates ready and working, a red
light indicates there is a problem. A flashing green light indicates network
traffic to the internet.
Light 3 - Indicates sensor network activity. A green light indicates ready and
working, a red light indicates there is a problem. A flashing green light
indicates radio traffic from the sensors.
For help troubleshooting Ethernet gateway lights view:
2. Ethernet Gateway Controls
Using the Control Button:
1) A short press will trigger the gateway to immediately send all stored sensor messages
to the online system and download any pending system messages to deliver to the
sensors. (The default heartbeat for the Ethernet gateway is 5 minutes.)
2) Press and hold to reset the gateway to factory settings. Factory settings will be reset to
defaults, including the heartbeat setting of 5 minutes on both the gateway and in the online
system. DHCP, server addressing and port are all restored to default settings, for example.
You will need to login to the online system after resetting the gateway to reconfigure the
gateway to your desired settings.
1. Understanding the Ethernet Gateway Lights
Light 1 - Indicates the Ethernet cable is plugged in. A green light indicates
ready and working, a red light indicates there is a problem.
Light 2 - Indicates the Ethernet has internet connectivity and can reach the
online monitoring system. A green light indicates ready and working, a red
light indicates there is a problem. A flashing green light indicates network
traffic to the internet.
Light 3 - Indicates sensor network activity. A green light indicates ready and
working, a red light indicates there is a problem. A flashing green light
indicates radio traffic from the sensors.
For help troubleshooting Ethernet gateway lights view:
2. Ethernet Gateway Controls
Using the Control Button:
1) A short press will trigger the gateway to immediately send all stored sensor messages
to the online system and download any pending system messages to deliver to the
sensors. (The default heartbeat for the Ethernet gateway is 5 minutes.)
2) Press and hold to reset the gateway to factory settings. Factory settings will be reset to
defaults, including the heartbeat setting of 5 minutes on both the gateway and in the online
system. DHCP, server addressing and port are all restored to default settings, for example.
You will need to login to the online system after resetting the gateway to reconfigure the
gateway to your desired settings.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
โฆษณา
ที่เกี่ยวข้อง
Monnit ALTA User Manual
Omega iMonnit-Premiere Owner Manual
MONNIT MNS2-8-W2-AC-VM Wireless Accelerometer Vibration Meter User Guide
Ethernet gateway MonnitLink User's Guide
MONNIT MNS2-9-W2-HU-RH Humidity Sensor User Guide
MONNIT Alta Wireless Accelerometer Tilt Sensor User Guide
MONNIT ALTA Wireless AA Carbon Dioxide (CO2) Sensor User Guide
Monnit ALTA MNS2-4-W2-GS-C2 User Manual
MONNIT MNS2-4-W2-TS-ST-L03 Temperature Sensor User Guide
MONNIT MNS2-8-W1-TS-DT-L08 Duct Temperature Sensor User Guide
Monnit ALTA User Manual
