MantelMount MM-Max1 Pull Down TV Mount Installation Guide
MantelMount MM-Max1 is a pull-down TV mount designed for screen sizes 50"-86", supporting TVs (with or without soundbars) weighing 20-90 lbs. It features adjustable lifting force, multiple viewing angles, and a visual temperature sensor. Install it above a fireplace or mantel, extending your TV downwards for optimal viewing.
Advertisement
Advertisement
MM-Max1 Pull Down TV Mount
INSTALLATION INSTRUCTIONS
Contains important safety information – please save this manual.
Read this entire manual before you begin!
INSTALLATION INSTRUCTIONS
Contains important safety information – please save this manual.
Read this entire manual before you begin!
MantelMount Max1 Installation Instructions2
This product is intended to be installed
by professional contractors or persons
familiar with the tools and methods
required for this installation.
If you are uncertain about your ability to
perform this installation, please contact
a professional.
Do not use this product in any way or
for any purpose that is not specifically
described in these instructions.
WA R R A N T YWA R R A N T Y
MantelMount offers a Lifetime Limited
Warranty for all TV mounts and accessories.
This Lifetime Limited Warranty covers all
mechanical parts but excludes lifetime
coverage for gas springs or electrical parts
which are warrantied for five (5) years from
the original purchase date.
MM-Max1 Installation Steps
Step 1 - Attaching Braces to TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Step 2 - Determine Wall Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
Step 3 - Attach Mount to Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
Step 4 - Attach TV to Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Step 5 - Make Final Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15
For any questions during installation, Contact Customer Support:
Monday – Friday, 7am–4pm PST 1.800.897.9755 x1 or [email protected]
I M P O R TA N TI M P O R TA N T
Your MM-Max1 mount has an adjustments
that must be made after the installation is
complete in order to operate properly.
The Tension Bolt adjusts the lifting force to
accommodate different TV weights. When
adjusted properly the force required to lower
and raise your mount should be equal.
Do not unpack box contents until verifying
the requirements listed on page 4.
WA R N I N G !WA R N I N G !
This product contains small parts that can
be a choking hazard. Do not let children
play with any of these small parts! Keep
children away from the work area during the
installation process.
C AU T I O NC AU T I O N
This product is intended to be installed
by professional installation contractors, or
persons familiar with the tools and methods
required for this installation. If you are not
sure about your ability to perform this
installation, you must contact a professional.
MantelMount is not responsible for damage
or injury caused by incorrect installation or
improper use.
Do not let children operate, pull on, or hang
from MantelMount. Do not let children push
MantelMount upward to the top position.
Only a person tall enough to control the
mount all the way to the top should operate
MantelMount.
Do not use this product in any way, or for any
purpose, that is not specifically described
in these instructions. MantelMount is not
responsible for damage or injury caused by
incorrect installation or improper use.
Some steps in this installation manual may require two people.
Helpful Installation Tips and Videos can be fount at: http://mantelmount.com/install-tips
For questions during installation? Contact Customer Support:
Monday – Friday, 7am– 4pm PST 1.800.897. 9755 x1 or [email protected]
WA R N I N G !WA R N I N G !
Do not place hands into Lifting mechanism.
The force of the Lifting mechanism can cause
bodily injury!
This product is intended to be installed
by professional contractors or persons
familiar with the tools and methods
required for this installation.
If you are uncertain about your ability to
perform this installation, please contact
a professional.
Do not use this product in any way or
for any purpose that is not specifically
described in these instructions.
WA R R A N T YWA R R A N T Y
MantelMount offers a Lifetime Limited
Warranty for all TV mounts and accessories.
This Lifetime Limited Warranty covers all
mechanical parts but excludes lifetime
coverage for gas springs or electrical parts
which are warrantied for five (5) years from
the original purchase date.
MM-Max1 Installation Steps
Step 1 - Attaching Braces to TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Step 2 - Determine Wall Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
Step 3 - Attach Mount to Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
Step 4 - Attach TV to Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Step 5 - Make Final Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15
For any questions during installation, Contact Customer Support:
Monday – Friday, 7am–4pm PST 1.800.897.9755 x1 or [email protected]
I M P O R TA N TI M P O R TA N T
Your MM-Max1 mount has an adjustments
that must be made after the installation is
complete in order to operate properly.
The Tension Bolt adjusts the lifting force to
accommodate different TV weights. When
adjusted properly the force required to lower
and raise your mount should be equal.
Do not unpack box contents until verifying
the requirements listed on page 4.
WA R N I N G !WA R N I N G !
This product contains small parts that can
be a choking hazard. Do not let children
play with any of these small parts! Keep
children away from the work area during the
installation process.
C AU T I O NC AU T I O N
This product is intended to be installed
by professional installation contractors, or
persons familiar with the tools and methods
required for this installation. If you are not
sure about your ability to perform this
installation, you must contact a professional.
MantelMount is not responsible for damage
or injury caused by incorrect installation or
improper use.
Do not let children operate, pull on, or hang
from MantelMount. Do not let children push
MantelMount upward to the top position.
Only a person tall enough to control the
mount all the way to the top should operate
MantelMount.
Do not use this product in any way, or for any
purpose, that is not specifically described
in these instructions. MantelMount is not
responsible for damage or injury caused by
incorrect installation or improper use.
Some steps in this installation manual may require two people.
Helpful Installation Tips and Videos can be fount at: http://mantelmount.com/install-tips
For questions during installation? Contact Customer Support:
Monday – Friday, 7am– 4pm PST 1.800.897. 9755 x1 or [email protected]
WA R N I N G !WA R N I N G !
Do not place hands into Lifting mechanism.
The force of the Lifting mechanism can cause
bodily injury!
MAX MOUNT Pull Down TV Mount
© 2024 MANEHU PRODUCT ALLIANCE, LLC. For more information on MantelMount patented technology visit: www.mantelmount.com/pages/patents
12.0"
30"
40" Max
2”
Distance of Vertical
Brace {31} below
the Wall Frame {40}
Measure TV to
Vertical Brace {31}
Measure TV to
Vertical Brace {31}
3Customer Support 1.800.897.9755 x1 [email protected]
22"
Max Clearance
29" Maximum Drop
3.25"
Thickness
11”
Distance of Vertical
Brace {31} above
the Wall Frame {40}
Install the TV at a
specific location.
Use dimensions above to
position the Wall Frame {40}
40º L-R
Full Motion Exclusive MantelMount Features!
Visual Temperature Sensor:
Handle changes to red color at
temperatures above 110 ºF to warn
users if the fireplace is too hot for
TV safety
Independent horizontal, swivel, and
vertical movements.
Adjustable lifting force keeps the TV
neutral in all positions.
Multiple Viewing Angles :
Extends from the wall and lowers to
eye level for optimal viewing. Make
any seat the best seat in the house
© 2024 MANEHU PRODUCT ALLIANCE, LLC. For more information on MantelMount patented technology visit: www.mantelmount.com/pages/patents
12.0"
30"
40" Max
2”
Distance of Vertical
Brace {31} below
the Wall Frame {40}
Measure TV to
Vertical Brace {31}
Measure TV to
Vertical Brace {31}
3Customer Support 1.800.897.9755 x1 [email protected]
22"
Max Clearance
29" Maximum Drop
3.25"
Thickness
11”
Distance of Vertical
Brace {31} above
the Wall Frame {40}
Install the TV at a
specific location.
Use dimensions above to
position the Wall Frame {40}
40º L-R
Full Motion Exclusive MantelMount Features!
Visual Temperature Sensor:
Handle changes to red color at
temperatures above 110 ºF to warn
users if the fireplace is too hot for
TV safety
Independent horizontal, swivel, and
vertical movements.
Adjustable lifting force keeps the TV
neutral in all positions.
Multiple Viewing Angles :
Extends from the wall and lowers to
eye level for optimal viewing. Make
any seat the best seat in the house
MantelMount Max1 Installation Instructions4
Before Installation
2 Inch Minimum
2 Inch Minimum
Top Edge of TV to
Bottom Edge of TV Distance from Top of TV to Bottom of
TV or Soundbar - Plus 4 Inches
Top Edge of TV to
Bottom Edge of Soundbar
1 Verify TV and wall space meet these criteria:
1 Verify that MM-Max1 will fit your space:
VESA
Width: 200-700mm
Height: 100-500mm
SCREEN SIZE
50" to 86" (With Soundbar)
55" to 86" (Without Soundbar)
VESA
Width: 200-700mm
Height: 100-500mm
50" – 86"
with Soundbar
VESA COMPLIANT
Up to
600 X 600mm
WEIGHT CAPACITY
20 to 90 LBS.
(Including Sound Bar)
WOOD STUDS FOR MOUNTING
Studs Maximum 28" apart;
Wall Covering Maximum 5/8"
MANTEL DEPTH
20" MAXIMUM
VESA
Width: 200-700mm
Height: 100-500mm
MAX 20-90 LBS
20" MAX
STUDS
MAX 28"
APART
3 Verify you have the required tools.
4–5mm 7-13mm
10–13mm
AWL Drill Bit Power DrillPencil LevelStud Finder Wrench Socket WrenchAllen Wrenches Tape Measure Tape DispenserPhillips
7/32"
The height of your space must be at least 4 inches taller than the largest height of your TV, or your TV / Soundbar combination.
2
55" – 86"
without Soundbar
Before Installation
2 Inch Minimum
2 Inch Minimum
Top Edge of TV to
Bottom Edge of TV Distance from Top of TV to Bottom of
TV or Soundbar - Plus 4 Inches
Top Edge of TV to
Bottom Edge of Soundbar
1 Verify TV and wall space meet these criteria:
1 Verify that MM-Max1 will fit your space:
VESA
Width: 200-700mm
Height: 100-500mm
SCREEN SIZE
50" to 86" (With Soundbar)
55" to 86" (Without Soundbar)
VESA
Width: 200-700mm
Height: 100-500mm
50" – 86"
with Soundbar
VESA COMPLIANT
Up to
600 X 600mm
WEIGHT CAPACITY
20 to 90 LBS.
(Including Sound Bar)
WOOD STUDS FOR MOUNTING
Studs Maximum 28" apart;
Wall Covering Maximum 5/8"
MANTEL DEPTH
20" MAXIMUM
VESA
Width: 200-700mm
Height: 100-500mm
MAX 20-90 LBS
20" MAX
STUDS
MAX 28"
APART
3 Verify you have the required tools.
4–5mm 7-13mm
10–13mm
AWL Drill Bit Power DrillPencil LevelStud Finder Wrench Socket WrenchAllen Wrenches Tape Measure Tape DispenserPhillips
7/32"
The height of your space must be at least 4 inches taller than the largest height of your TV, or your TV / Soundbar combination.
2
55" – 86"
without Soundbar
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Advertisement
Key features
Pull-down mechanism
Adjustable lifting force
Multiple viewing angles
Temperature sensor
Fits 50"-86" screens
Soundbar compatibility
Frequently asked questions
The MM-Max1 can support TVs weighing 20 to 90 lbs, including the soundbar.
The mount works with TVs ranging from 50" to 86", depending on whether a soundbar is used.
The handle changes to red if the temperature exceeds 110°F, warning you if the fireplace is too hot for TV safety.
The manual shows a maximum drop distance of 29 inches.
Remove the TV and increase the lifting force by adjusting the tension bolt.
Related
BEDA110 Pull Down Rail Manual | AI Chat & PDF Download
MantelMount MM-Max2 Installation Guide
MantelMount MM-710 MantelMount Pro Series Pull Down TV Mount Installation Guide
MM700 Standard Pull Down TV Mount: AI Chat & PDF Access
MantelMount MM815 Motorized TV Mount Installation Manual
ECB6250 Wall Mounting Template
