Quality Espresso DISPLAY coffee machine Operating instructions
Publicitate
Publicitate
1
COFFEE MACHINE DISPLAY
Contents
1. Main functions of display
2. User screens:
2.1 Main (Standby mode)
2.2 System temperatures
2.3 Coffee counter
2.4 Water softener regeneration
2.5 Clock programming
3. Warning screens
4. Screens for authorised personnel
5. General diagram of the system
1. MAIN FUNCTIONS OF THE DISPLAY
The system is made up of a group of twelve screens, which in turn are divided into a specific
number of sub-screens, where the data is displayed and modified.
Depending on the model, the text in the displays, can be abbreviated or not.
The MOD key enables movement through the group of screens.
Pressing the PAS key leads to the sub-screens. Pressing the MOD key from any sub-screen
returns the user to the group of screens (see General Diagram of the System).
COFFEE MACHINE DISPLAY
Contents
1. Main functions of display
2. User screens:
2.1 Main (Standby mode)
2.2 System temperatures
2.3 Coffee counter
2.4 Water softener regeneration
2.5 Clock programming
3. Warning screens
4. Screens for authorised personnel
5. General diagram of the system
1. MAIN FUNCTIONS OF THE DISPLAY
The system is made up of a group of twelve screens, which in turn are divided into a specific
number of sub-screens, where the data is displayed and modified.
Depending on the model, the text in the displays, can be abbreviated or not.
The MOD key enables movement through the group of screens.
Pressing the PAS key leads to the sub-screens. Pressing the MOD key from any sub-screen
returns the user to the group of screens (see General Diagram of the System).
2
2. USER SCREENS
2.1 Main
It automatically alternates between two screens every 30 seconds (Screen- A, publicity and
Screen- B, timer and temperature), the user being able to see either of them when desired, by
pressing PAS.
Standby mode: (Screen unlit, general switch in position - 1)
The machine remains in off position until put into use (normal mode)
Activate Standby:
From the timer screen (Screen-B), keep the CAM key pressed down (4 sec.) until
seeing the display, the publicity screen unlit (Screen-A).
De-activate Standby: (Pass to normal mode)
Keep the CAM key pressed down (4 sec.) until seeing the publicity screen lit up (Screen-A)
2.2 System temperatures
Shows the temperature of the boiler and the steam nozzle (according to the version of the
machine)
The temperature of the boiler is shown from 45º C on, a in bold indicates when the heat ing
element is working.
When, instead of the temperature, it shows XXX, it means that no probe is connected (or it has
broken down).
Consult temperatures:
1. Press the MOD key to see the “SYSTEM TEMPERATURE” screen (Screen-C)
2. Press the PAS key to see the sub-screen with the required information. (Sub-screen C1)
2. USER SCREENS
2.1 Main
It automatically alternates between two screens every 30 seconds (Screen- A, publicity and
Screen- B, timer and temperature), the user being able to see either of them when desired, by
pressing PAS.
Standby mode: (Screen unlit, general switch in position - 1)
The machine remains in off position until put into use (normal mode)
Activate Standby:
From the timer screen (Screen-B), keep the CAM key pressed down (4 sec.) until
seeing the display, the publicity screen unlit (Screen-A).
De-activate Standby: (Pass to normal mode)
Keep the CAM key pressed down (4 sec.) until seeing the publicity screen lit up (Screen-A)
2.2 System temperatures
Shows the temperature of the boiler and the steam nozzle (according to the version of the
machine)
The temperature of the boiler is shown from 45º C on, a in bold indicates when the heat ing
element is working.
When, instead of the temperature, it shows XXX, it means that no probe is connected (or it has
broken down).
Consult temperatures:
1. Press the MOD key to see the “SYSTEM TEMPERATURE” screen (Screen-C)
2. Press the PAS key to see the sub-screen with the required information. (Sub-screen C1)
3
2.3 Coffee counter
Shows the number of partial coffees (programmed portions “ESPRESSO COFFEE” and continuous
coffees (“CONTINUOUS COFFEES“) and totals made during the life of the machine (“TOTAL
SERVINGS”)
Consult coffees made:
1. Press the MOD key until the screen displays “COFFEE COUNTER”. (Screen- D)
2. Press the PAS key as many times as required to see the sub-screen with the desired
information.
IMPORTANT NOTE.- Screens with broken lines above only appear in models with automatic
cappuccino maker incorporated.
Setting the coffee counter to zero:
1. Press the MOD key until the screen displays: “COFFEE COUNTER” (Screen- D)
2. Press the PAS key positioning it on the required sub-screen to be set to zero
3 Press the CAM key (the display digits flash)
4 Press the SET key (the counter goes to zero)
5 Press the CAM key (the display digits stop flashing)
6 Press the PAS key to confirm
It is not possible to set the total servings to zero (Sub-screen - D6)
2.4 Regeneration of water softener.
It shows the litres remaining to be consumed before carrying out the regeneration of the water
softener and the quantity of litres of water programmed that must be consumed before the
regeneration is carried out.
To consult remaining litres and programmed litres:
1. Press the MOD key until the screen displays: “WATER SOFTENER REGENERATION” (Screen - E).
2. Press the PAS key the number of times necessary until the desired sub-screen is displayed.
2.3 Coffee counter
Shows the number of partial coffees (programmed portions “ESPRESSO COFFEE” and continuous
coffees (“CONTINUOUS COFFEES“) and totals made during the life of the machine (“TOTAL
SERVINGS”)
Consult coffees made:
1. Press the MOD key until the screen displays “COFFEE COUNTER”. (Screen- D)
2. Press the PAS key as many times as required to see the sub-screen with the desired
information.
IMPORTANT NOTE.- Screens with broken lines above only appear in models with automatic
cappuccino maker incorporated.
Setting the coffee counter to zero:
1. Press the MOD key until the screen displays: “COFFEE COUNTER” (Screen- D)
2. Press the PAS key positioning it on the required sub-screen to be set to zero
3 Press the CAM key (the display digits flash)
4 Press the SET key (the counter goes to zero)
5 Press the CAM key (the display digits stop flashing)
6 Press the PAS key to confirm
It is not possible to set the total servings to zero (Sub-screen - D6)
2.4 Regeneration of water softener.
It shows the litres remaining to be consumed before carrying out the regeneration of the water
softener and the quantity of litres of water programmed that must be consumed before the
regeneration is carried out.
To consult remaining litres and programmed litres:
1. Press the MOD key until the screen displays: “WATER SOFTENER REGENERATION” (Screen - E).
2. Press the PAS key the number of times necessary until the desired sub-screen is displayed.
5
6
7
8
9
10
11
12
Publicitate
Similare
Faema E71 E Engineer's Manual - Read Online & Download
TOUCH AEP - SAE & ELECTRONIC WITH DISPLAY Instructions: AI Chat & PDF Download
Gloria Coffee Machine Manual AL AEP-SAE, SAE DISPLAY
San Marino Lisa-R Espresso Machine: AI Chat & PDF
Wega MyConcept EVDP 2GR Use And Maintenance Manual
Expobar G-10 Service Manual - Download PDF & View Online
Cimbali Coffee Machine PDF Manual: AI Chat & PDF Download
