Set General Firewall Settings. Netgear PY314400297, D2200D-1FRNAS

Netgear D2200D-1FRNAS is an ADSL2 Gateway that is designed to provide a fast and reliable internet connection for your home or office. With its advanced features, you can easily connect multiple devices to the internet, control access to the internet and secure your network from online threats. The Netgear D2200D-1FRNAS also provides comprehensive network management tools that allow you to optimize your network performance and troubleshoot any issues that may arise.

PDF

Document

Key features

High-speed ADSL2+ internet connectivity
Built-in firewall for network security
Port forwarding for hosting online games and applications
Static NAT for assigning permanent IP addresses to devices
Remote management for managing your network from anywhere
Quality of Service (QoS) for prioritizing network traffic
UPnP support for automatic device configuration
Guest network for providing secure internet access to visitors
WPS support for easy wireless device connection

Frequently asked questions

You can connect your devices to the Netgear D2200D-1FRNAS using either a wired or wireless connection. For a wired connection, simply connect an Ethernet cable from your device to one of the Ethernet ports on the back of the gateway. For a wireless connection, follow the steps outlined in the user manual.

To set up the firewall on the Netgear D2200D-1FRNAS, log in to the gateway's web interface and navigate to the Firewall section. From there, you can enable the firewall and configure the various firewall settings.

To port forward on the Netgear D2200D-1FRNAS, log in to the gateway's web interface and navigate to the Port Forwarding section. From there, you can create port forwarding rules to allow specific traffic to pass through the firewall.

To set up a guest network on the Netgear D2200D-1FRNAS, log in to the gateway's web interface and navigate to the Guest Network section. From there, you can enable the guest network and configure the various guest network settings.