Custom Installation. Oppo BDP-103D, BDP-103

I N S T A L L A T I O N

Custom Installation

External IR (Infrared Remote) Installation

The BDP-103D features an IR IN port on its back panel. If the player is to be installed in an equipment cabinet where direct line-of-sight is not available for the remote control, you can purchase an external IR Remote

Sensor and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to ensure reliable operation.

Rear Panel

3.5mm Mono Cable

External IR Remote Signal

IR IN Signal Identifications

3.5mm Mono Plug

Tip: IR carrier signal

Sleeve: Ground

NOTE

When an external IR sensor is plugged in, the original IR sensor window on the front panel will be disabled.

The IR port on the BDP-103D is NOT compatible with the prior generation of external

IR Remote Sensor (IR-ES1) which is used on BDP-83.

OPPO cannot guarantee that the IR IN port will be compatible with devices that are not manufactured by OPPO. Connecting the IR IN port to an incompatible device may result in damage to the connected device or the player.

Please contact OPPO customer support if you plan to integrate the player into an IR distribution system. Customer support can provide recommendations on how to properly connect the control signals.

RS232 Control

The BDP-103D has an RS232 control port and can be integrated into most custom home theater control systems.

Please ask your custom installer to contact OPPO for the RS232 control protocol, or check the OPPO Digital website (www.oppodigital.com) for the latest version of RS-232 protocol document.

21