Loading the Paper Hopper . Paitec ES 2000, ES-2000, ES 2500

Loading the Paper Hopper

It is important that you load the paper hopper correctly to minimize the risk of paper jams occurring.

Fan the pressure seal forms to separate and to eliminate any static that may have been caused by the laser printer.

Adjusting the hopper paper guides to the correct location

Too much gap!

Please note.

The hopper will take up to 150 printed forms. However please do not overload the hopper. This will result in miss-feeding

Good

Paper Guide Tension

Insure that the side guides are right up against the edge of the form but not compressing the form

- 11 -