Swimming pool heating. Alpha innotec Comfort-Platine II

System settings of

Swimming pool heating

1. Set the swimming pool heating options in the

“System settings” menu.

Setting the operating mode for the swimming pool heating

sw.pool prep.

with CP

Swimming pool heating additional circulating pump in oper -

wo. ZUP

ation during swimming pool heating additional circulating pump is switched off during swimming pool heating

sw.pool min

Minimum operating duration of swimming pool heating

Required in the case of a return flow integration so that there is no constant switching between the swimming pool and a higher-priority prepara tion mode. This means that requests with high er priority (heating, domestic hot water,

…

) are ig nored during the set time.

2. Scroll down the menu to the “Swimming pool” pa rameter.

Automatic

Swimming pool heating operates based on pro grammed times: during the activated period up to the value set at the thermostat; outside of the ac tivated period the swimming pool heating is off.

Party

Continuous activation of the swimming pool heating

Holidays

The swimming pool heating is shut off

starting immediately up until the set date or until another operating mode is manually selected

.

If operating mode “Holidays” is selected, the screen switches to the menu “Swimming pool heating Holidays”:

Swimmingpool

Swimming pool heating

wo HSP

Heating circulation pump is switched off during swimming pool heating

with HSP

Swimming pool heating is prepared via heating circulation pump

par. HUP

HUP and SUP run simultaneously dur ing swimming pool heating

3. Save input by selecting .

1 Menu field “Start of holidays“

2 Menu field “End of holidays“

Off

The swimming pool heating is shut off.

1. Select desired operating mode.

2. Return to the previous menu.

Subject to change without notice | 83052500dUK – Translation of the original operating manual | ait-deutschland GmbH

15

15