Teletext Services. Panasonic TX55CRW454, TX-55CRW454

List Schedule(*)

(*)

In this layout option, only the events of the highlighted channel will be listed.

Prev. Time Slice (Red button):

Displays the programmes of previous time slice.

Next/Prev Day (Programme +/- buttons):

Displays the programmes of previous or next day.

Event Details (Info button):

Displays detailed information about selected programmes.

Filter (Text button):

Views filtering options.

Next Time Slice (Green button):

Displays the programmes of next time slice.

Options (OK button):

Displays event options.

Rec./Stop (Record button):

The TV will start to record the selected programme. You can press again to stop the recording.

IMPORTANT:

Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature.

Note:

Switching to a different broadcast is not available during a recording.

Now/Next Schedule

Navigate (Directional buttons):

Press the

Directional buttons

to navigate through the channels and programmes.

Options (OK button):

Displays event options.

Event Details (Info button):

Displays detailed information about selected programmes.

Filter (Blue button):

Views filtering options.

Rec./Stop (Record button):

The TV will start to record the selected programme. You can press again to stop the recording.

IMPORTANT:

Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature.

Note:

Switching to a different broadcast is not available during a recording.

Programme Options

Use the directional buttons to highlight a programme and press

OK

button to display

Event Options

menu.

The following options are available.

Select Channel:

Using this option, you can switch to the selected channel.

Record / Delete Rec. Timer:

Select the

Record

option and press the

OK

button. If the programme is going to be broadcasted at a future time, it will be added to

Timers

list to be recorded. If the selected programme is being broadcasted at the moment, recording will start immediately.

To cancel an already set recording, highlight that programme and press the

OK

button and select the option

Delete Rec. Timer

. The recording will be cancelled.

Set Timer on Event / Delete Timer on Event:

After you have selected a programme in the EPG menu, press the

OK

button. Select

Set Timer on Event

option and press the

OK

button. You can set a timer for future programmes. To cancel an already set timer,

English

- 19 highlight that programme and press the

OK

button.

Then select

Delete Timer on Event

option. The timer will be cancelled.

Notes:

You cannot switch to any other channel while there is an active recording or timer on the current channel.

It is not possible to set timer or record timer for two or more individual events at the same time interval.

Teletext Services

Press the

Text

button to enter. Press again to activate mix mode, which allows you to see the teletext page and the TV broadcast at the same time. Press once more to exit. If available, sections in the teletext pages will become colour-coded and can be selected by pressing the coloured buttons. Follow the instructions displayed on the screen.

Digital Teletext

Press the

Text

button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons and the

OK

button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on the digital teletext screen.

When the

Text

button is pressed again, the TV returns to television broadcast.

Software Upgrade

Your TV is capable of finding and updating the firmware automatically via the broadcast signal or via Internet.

Software upgrade search via user interface

On the main menu select

Setup

and press the

OK

button.

Setup Menu

will be displayed. Then select

More

and press the

OK

button. Navigate to

Software upgrade

and press the

OK

button. In

Upgrade options

menu select

Scan for upgrade

and press

OK

button to check for a new software upgrade.

If a new upgrade is found, it starts to download the upgrade. After the download is completed confirm the question asking about rebooting the

TV by pressing the

OK

to continue with the reboot operation.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning

option in the

Upgrade options

menu is set to

Enabled

and if the TV is connected to an aerial signal or to Internet. If a new software is found and downloaded successfully, it will be installed at the next power on.

Note:

Do not unplug the power cord while led is blinking during the reboot process. If the TV fails to come on after the upgrade, unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to wall outlet. Check if batteries are exhausted. Press the Power button on the TV.