PROGRAMMED EDIT RECORDING. Sony CX-NA31, CX-NA50, NSX-A54, NSX-A50

RECORDING (cont.) pg. 15

AI EDIT RECORDING

The AI edit function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged so that no track is cut short. (AI: Artificial Intelligence)

NOTE

AI edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.

1 Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press the CD button and load the disc(s).

3 Press the CD EDIT/CHECK button once.

"EDIT" lights up and AI edit flashes on the display.

Each time it is pressed, the display changes as follows.

To select with the remote control, press the EDIT/CHECK button while pressing the SHIFT button.

4 Press one of the DISC DIRECT PLAY buttons to select a disc.

5 Press the or button to designate the tape length.

10 to 99 minutes can be specified.

In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.

• The numbered buttons on the remote control are also available to designate the tape length.

Example: When using a 60 minute tape, press the 6 and 0 buttons.