Tape Counter Memory Feature. Zenith LHS-C245W, XBS448, LHS-C245T, ZHX-313
Add to my manuals
47 Pages
advertisement
VCR Operation (Continued)
Tape Counter Memory Feature
Real-Time Counter
Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display.
Every press of CLK/CNT changes the TV screen display as illustrated below.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
REMAINING TIME
Counter changes to “0:00:00” when the cassette is ejected.
The real-time counter does not operate if nothing is recorded on the tape.
The real-time counter will not work unless a tape is inserted.
Counter Memory Feature
This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.
11
Begin recording or playing a tape.
22
33
Press CLK/CNT repeatedly to display the real-time counter on the TV screen.
At the point that you want to locate later, reset the real-time counter to “0:00:00” by pressing
CLEAR.
44
Continue to play or record.
55
Press STOP (x ) once or twice when recording or playback finishes.
66
Press BACKWARD (.
).
The tape automatically stops when the tape counter returns to about “0:00:00”.
Tape Remaining
This function shows the remaining time on the tape during recording or playback.
Press CLK/CNT repeatedly until the REM indicator appears on the TV screen during recording or playback.
Additional Information
In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the DVD+Hi-Fi
VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD+Hi-Fi VCR will turn itself off.
After you have finished using the DVD+Hi-Fi VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.
Be sure the DVD+Hi-Fi VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by tuning the television to the DVD+Hi-Fi VCR channel (3 or 4) and using the
TV/VCR selector to turn the DVD+Hi-Fi VCR’s TV indicator off.
Do not attempt to hook up more than one television set to the DVD+Hi-Fi VCR for either recording or playback.
Auto Play System
This DVD+Hi-Fi VCR features automatic playback.
Load a cassette (with the safety tab removed).
The Output Source is changed to VCR mode automatically.
The power turns on automatically and playback begins.
At the end of the tape, the DVD+Hi-Fi VCR stops and rewinds the tape.
The cassette is ejected after rewinding and the VCR turns itself off automatically.
LOAD AUTO
TAPE
AUTO
PLAY
AUTO
REWIND
EJECT
AUTO
POWER
OFF ote
Auto power off does not function during regular DVD play mode. (DVD+Hi-Fi VCR power stays on.) ote
The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc.)
29
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Safety Precautions
- 3 IMPORTANT SAFETY INSTRUCTIONS
- 4 Table of Contents
- 5 Before Use
- 5 Playable Discs
- 6 Precautions
- 6 Notes on Discs
- 6 Disc Symbols
- 7 Front Panel Control Buttons
- 8 Display Window Indicators
- 9 Remote Control Buttons
- 10 Rear Panel Connections
- 11 Connections
- 11 VCR System
- 12 Basic TV Connections
- 12 Optional TV Connections
- 13 DVD+Hi-Fi VCR
- 13 Radio Antenna Connections
- 14 Speaker System Connections
- 14 Speaker Positioning
- 15 Glossary for Audio Stream & Surround mode
- 16 VCR Operation Setup
- 16 On-Screen Display (OSD)
- 16 On-Screen Menus Setup
- 17 VCR Setup Menu Options
- 17 Channel Selection
- 18 Setting the Clock
- 19 DVD Operation Setup
- 19 General Explanation
- 19 On-Screen Display
- 21 Initial Settings
- 21 General Operation
- 21 Language
- 21 Picture
- 22 5.1 Speaker setup
- 22 Others
- 23 Parental Control
- 24 VCR Operation
- 24 Normal Playback
- 24 Special Effect Playbacks
- 24 Search
- 24 Slow Motion
- 24 CM Skip (Commercial Skip)
- 25 Normal Recording
- 25 Timer Recording
- 27 Instant Timer Recording
- 27 Dubbing and Editing
- 27 Copying from DVD to VCR
- 28 VHS Hi-Fi Stereo System/MTS Broadcast
- 29 Tape Counter Memory Feature
- 29 Additional Information
- 30 DVD Operation
- 30 Playing a DVD
- 30 General Features
- 30 Moving to another TITLE/GROUP
- 30 Moving to another CHAPTER/TRACK
- 30 Search
- 30 Pause
- 31 Slow Motion
- 31 Repeat A-B
- 31 Repeat
- 31 Time Search
- 32 3D Surround
- 32 Marker Search
- 32 Title Menu
- 32 Disc Menu
- 32 Camera Angle
- 32 Changing the Audio Channel
- 32 Subtitles
- 33 DVD Audio Discs
- 33 Moving to another GROUP
- 33 Viewing another PAGE
- 34 Audio CD and MP3/WMA Disc Operation
- 34 Playing an Audio CD and MP3/WMA Disc
- 34 Notes on MP3/WMA Recordings
- 35 Pause
- 35 Moving to another Track
- 35 Repeat Track/All/Off
- 35 Search
- 35 Repeat A-B
- 35 3D Surround
- 35 Changing the Audio Channel
- 36 JPEG Disc Operation
- 36 Viewing a JPEG disc
- 37 Programmed Playback
- 37 and MP3/WMA Disc
- 38 Speaker Setup
- 39 Radio Operation
- 41 Troubleshooting
- 43 Language Code List
- 44 Country Code List
- 45 Specifications