Indicators and Controls. Creative GigaWorks S750, S750

MWorks THX S750 CLE.book Page 8 Friday, September 5, 2003 12:05 PM

Indicators and Controls

8

14

15

12

13

16

17

18

9

10

11

7

8

5

6

No.

Button/Indicator

1

2

3

Standby/Power button

Volme Adjust buttons

Select button

Upmix button

4

Power indicator

Master Volume

Mode indicator

Center Mode indicator

Side Mode indicator

Rear Mode indicator

Subwoofer Mode indicator

Treble Mode indicator

Description Notes

Turns the system on or off the Standby mode

Decreases or increases the selected output level.

Previous user settings are restored when system is turned on.

Use the Select button to choose Master, Center,

Side, Rear speaker and Sub/Treble output levels.

Selects Master, Center, Side, Rear, Sub or Treble modes for adjustment.

Selects

5.1 → 7.1 upmixing

6.1 → 7.1 upmixing

OFF (No upmix)

Use the Volume Adjust buttons to adjust the selected output levels.

See Page 11, “Understanding Upmixing” for details.

Displays the power status of the system Red denotes system standby mode.

Illuminates when the Master Volume adjustment mode is selected.

Illuminates when the Center Volume adjustment mode is selected.

Illiuminates when the Side Mode Volume adjustment mode is selected.

Illuminates when the Rear Volume adjustment mode is selected.

Illuminates when the Sub Volume adjustment mode is selected.

Illuminates when the Treble Volume adjustment mode is selected.

The output levels of all speakers are adjusted simultaneously, including headphones volume.

The output level of the Center speaker is adjusted.

The output levels of the Side speakers are adjusted.

The output levels of the Rear speakers are adjusted.

The output level of the Subwoofer is adjusted.

Also adjusts bass level for headphones.

The output level of the Treble is adjusted for all speakers. Also adjusts treble levels for headphones.

Upmix status indicator

Headphone output

Line input

M-PORT

Illuminates when upmixing is active.

Connects to any headphones with a 3.5 mm (1/8 inch) plug.

Allows connection of an analog stereo device.

Portable Audio Docking Point.

5.1 → 7.1 For 5.1 source devices

6.1 → 7.1 For 6.1 source devices

All speakers are muted when headphones are connected.

Connect to the line output of a Jukebox, MD

Player and other portable audio devices.

Allows direct connection of your Creative Digital

Audio Player or any device featuring the M-PORT logo for streaming audio.

Dependent on mode setting.

Volume

Level indicators

Mute button

Select buttons

Indicate volume or output level being adjusted.

Silences the speaker and headphones outputs.

In mute mode, all illuminated indicators will blink continuously.

Directly select Sub or Treble volume adjustment modes, as well as level adjustment modes for Center, Side, or

Rear speakers.

These buttons on the remote control let you directly select Side, Center, Rear, Sub and Treble modes for adjustment.

Table 1: Overview of the Audio Control Pod and Remote Control