advertisement
▼
Scroll to page 2
of 226
Bluetooth Module Removal
Prerequisite:
1.
Find Bluetooth module (E) on upper cover. Refer to Figure 3-11 .
2.
Disconnect Bluetooth cable (C) from mainboard connector (Figure 3-17 )
.
3.
Release the Bluetooth board (A) from the board guide (B) (Figure 3-17 )
.
0
B
C
A
Figure 3-17.
Bluetooth Module
4.
Lift the Bluetooth module from the upper cover (Figure 3-18).
3-22
Figure 3-18.
Bluetooth Module
Machine Maintenance Procedures
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project