Printing on Custom Paper. Epson Stylus Pro 7900 Spectro Proofer, Stylus Pro 9900 Spectro Proofer, Stylus Pro 7900, Stylus Pro 7910, Stylus Pro 9900

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide

Variety of Printings

Printing on Custom

Paper

You can also print on a custom paper, using the steps below.

For Windows

A

Open the printer driver window.

See “From Windows applications” on page 112

B Click User Defined in the Main menu.

The size you can register is as follow.

Paper width

Paper height

✽

Epson Stylus Pro 9900/9910:

89 to 1118 mm

Epson Stylus Pro 7900/7910:

89 to 610 mm

Windows: 127 to 15000 mm

Mac OS X: 127 to 15240 mm

✽ The maximum length of the paper roll can be longer than the paper height if using application software that supports banner printing. However, the actual print size is depending on the application, the paper size set in the printer, or the computer environment.

Note:

❏ For Mac OS X, you can set a larger size in the

Custom Paper Size than the size that you can set in the printer; however, it does not print correctly.

❏ The available output size may be limited depending on the application software.

Note:

You cannot select User Defined if both Sheet is selected for Source and Borderless is selected for Paper Settings.

151

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide

Variety of Printings

C

Set the custom paper size you want to use, and then click Save.

❏ You can enter up to 24 single-byte characters for the Paper Size Name.

❏ You can easily change the size by selecting the paper size close to the size you want to set in the Base Paper Size.

❏ If the ratio is same as the defined paper size, select the ratio from the Fix Aspect

Ratio and select either Landscape or

Portrait for the Base. In this case, you can only adjust either the Paper Width or Paper Height.

For Mac OS X

A

Open the Page Setup dialog.

See “Accessing the Page Setup dialog” on page 122

B Select Manage Custom Sizes in Paper Size.

C Click +, and enter the paper size name.

Note:

❏ To change the paper size you have registered, select the paper size name in the list, and then change the size.

❏ To delete the user-defined size you have registered, select the paper size name in the list, and then click Delete.

❏ You can register up to 100 paper sizes.

D Click OK to save the custom paper size.

The custom paper size is registered in the

Paper Size.

Now, you can print by taking the same steps as usual.

152

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide

Variety of Printings

D

Enter the paper width, paper height, and margins, and then click OK.

The paper size and printer margin you can set is as follow.

Page setup

Sheet

Roll Paper

Roll Paper

(Banner)

Roll Paper

(Borderless,

Auto

Expand)

Roll Paper

(Borderless,

Retain Size)

Roll Paper

(Borderless,

Banner)

Paper size

Supported paper size

Supported paper size

Supported paper size

Margins

Top, Left,

Right: 3 mm

Bottom:

14.2 mm

Top, Bottom,

Left, Right:

3 mm

Top, Bottom:

0 mm

Left, Right:

3 mm

Top, Bottom,

Left, Right:

0 mm

The paper width that supports borderless printing.

The paper width that supports borderless printing and plus 6 mm.

Top, Bottom,

Left, Right:

0 mm

Note:

❏ To change the setting you have registered, click the paper size name from the list.

❏ To duplicate the paper size you have registered, click the paper size name from the list, and then click Duplicate.

❏ To delete the paper size you have registered, click the paper size name from the list, and then click -.

❏ The custom paper size setting is different depending on the version of the operating system. See your operating system’s documentation for details.

E Click OK.

The custom paper size is registered in the

Paper Size pop-up menu. Now, you can print by taking the same steps as usual.

153