advertisement
MPEG Out
This player is capable of outputting the MPEG digital bitstream. When the player is connected to an AV component that has a built-in MPEG decoder, select the
[MPEG] setting. Otherwise, select [MPEG 3 PCM] to convert the digital signal to the PCM signal, the digital signal output from a CD.
Audio1 Audio2 Video Language General
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz
3
48kHz
MPEG Out MPEG
MPEG 3 PCM
Change MPEG audio output mode
Move SETUP Exit
Settings: MPEG
MPEG 3 PCM*
* Factory Setting
Digital Out
Expert
Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to
[Off] there is no signal output from the digital audio output jacks.
Make changes to the [Digital Out] setting in the Setup screen Audio 1 menu in the [Expert] menu mode (page 25).
Adjusting the Dynamic Range of the Audio Soundtrack
– DVD
Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such as dialog can be heard more clearly without making loud sounds even louder. Select from three levels of compression depending on how much effect you want.
When Audio DRC is set to [Off], there is no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup screen Audio 2 menu.
Audio1 Audio2 Video Language General
Audio DRC High
Medium
Low
Off
Dynamic playback at low volume
Move SETUP Exit
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
* Factory setting
Note
Audio DRC is only effective with Dolby Digital audio sources.
Audio1 Audio2 Video Language General
Dolby Digital Out –
DTS Out –
Dolby Digital
Off
96kHz PCM Out – 96kHz>48kHz
MPEG Out – MPEG
3
PCM
Digital Out On
Off
Move SETUP Exit
Settings: On (Digital bitstream is output)*
Off (Digital bitstream is not output)
* Factory Setting
27
advertisement
Related manuals
advertisement