Additional picture settings. Medion Flat Panel TV

A

DDITIONAL PICTURE SETTINGS

Move the cursor to ADDITIONAL PICTURE SETTINGS with the P+/P- Buttons and press the

MENU Button.

Continue Picture

1. Noise reduction

2. Sharpness

3. Comb filter

4. Colour registration

5. Backlight

6. White balance

7. Perfect Clear

8. Antiflicker

Further fine adjustments in relation to the impression made by the picture can be carried out in this Menu.

1. Noise Reduction:

The picture quality can be improved, in the case of grainy pictures with this function.

The AUTOMATIC/OFF/WEAK/MEDIUM/LOUD settings can be selected through a menu with the VOL+/VOL- Buttons or the MENU Button.

The device will adjust the noise reduction automatically to the reception quality at the

AUTOMATIC setting. The MEDIUM and LOUD settings should only be selected in the case of a heavily distorted picture, because jerky movements can arise if the picture content is moving fast. This setting can be set individually for each channel slot.

2. Sharpness:

The picture sharpness can be adjusted to your personal requirements with the

VOL+/VOL- Buttons. You reach the Settings Mode by pressing the MENU Button. The menu is faded out, in order to be able to assess the picture, and the setting can be carried out through a setting bar. This setting can be set individually for each channel slot.

3. Comb Filter:

Disruptive wave lines in check patters in the picture content can be avoided by activating this function.

4. Colour Registration:

This function serves to even out differences arising between the coloured parts of the picture and the picture contours.

The setting can take place in the Menu with the VOL+/VOL- Buttons. You also reach the Settings Mode, by pressing the MENU Button. The menu is faded out and it is possible to carry out the setting through a setting bar. This setting can be established individually for each channel slot.

5. Backlight (Only active in the case of LCD TV devices – not in the case of plasma TVs):

The brightness of the background lighting of the TV can be controlled with this function.

You can choose between the WEAK/ MEDIUM/ NORMAL/ FULL settings through one menu with the VOL+/VOL- Buttons or the MENU Button.

6. White Balance:

You can adjust the whiteness impression to your requirements in three stages with the

VOL+/VOL- Buttons.

7. Perfect Clear:

You can activate a special digital Picture Improvement Mode with the VOL+/VOL- Buttons under this Point.

7.. G E ER C O TR & A D ST T

15