CONTROL PANEL DESCRIPTION. EUTECH INSTRUMENTS 68900-03, Digi-Sense 68900-01, Digi-Sense 68900-03
Add to my manuals
30 Pages
advertisement
kit. A two-line, 16-character, 14-segment vacuum fluorescent display is used for display of operating, setup, and alarm parameters.
A number of accessories can be used with this Temperature Controller, including various types of temperature sensors, heating units, cooling units (such as fans or pumps), remote alarms, and recorders.
CONTROL PANEL DESCRIPTION
Refer to Figure 4 and the following paragraphs.
Readout Display LEFT Arrow
Indicator
Lights
UP and
DOWN
Arrows
Alarm LED
Function Control Keys
FIGURE 4. FRONT PANEL DISPLAYS
Vacuum Fluorescent Readout
The vacuum fluorescent readout displays operation and setup parameters.
Alarm conditions are also displayed.
UP, DOWN, LEFT Arrows
The UP and DOWN arrow keys will increment or decrement the current values of displayed (blinking) numerals or enable you to scroll through a list where multiple-choice parameters are offered. The LEFT arrow key allows you to change numeric settings by moving the blinking cursor left to the next most significant digit. When you have reached the most significant digit
(furthest left), the LEFT arrow key will move the flashing cursor back to the least significant digit (furthest right).
MENU Key
The MENU key allows you to access all of the user-configurable setup parameters of the temperature controller. Pressing the MENU key will scroll through the parameter options, using the arrow keys to change those parameters. Refer to the Setup Procedure section for additional information on each parameter.
4
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 SAFETY PRECAUTIONS
- 5 INTRODUCTION
- 6 APPLICATION DATA
- 6 DESCRIPTION
- 6 GENERAL
- 7 CONTROL PANEL DESCRIPTION
- 7 Vacuum Fluorescent Readout
- 7 UP, DOWN, LEFT Arrows
- 7 MENU Key
- 8 SET Key
- 8 ALARM Key
- 8 TUNE Key
- 8 RUN/STOP Key
- 8 HEAT, COOL, TUNE LED Annunciators
- 8 How To Use This Product
- 9 INSTALLATION
- 9 INITIAL HARDWARE SETUP
- 11 SETUP PROCEDURE
- 11 Thermocouple
- 12 Temperature Scale
- 12 Alarm Selections
- 13 HI Alarm
- 14 LO Alarm
- 14 HILO Alarm
- 15 Alarm Hysteresis
- 16 Audible Alarms
- 16 Advanced Set-Up
- 16 Sensor Calibrate
- 17 Over Temp Stop
- 17 Loop Break Stop
- 18 Control Action
- 18 Control Mode
- 19 Control Mode On/Off
- 19 PID - Proportional Band, Integral and Derivative
- 19 AUTO Tune
- 20 Proportional Band
- 20 Integral Time
- 21 Derivative Rate
- 21 Cycle Time
- 21 Run Time
- 22 Power Up Control
- 23 OPERATION
- 23 RUN MODE
- 24 TROUBLESHOOTING AND MAINTENANCE
- 24 TROUBLESHOOTING
- 24 CALIBRATION
- 24 MAINTENANCE/CLEANING
- 25 SPECIFICATIONS
- 26 INPUTS
- 26 OUTPUTS
- 27 WARRANTY
- 27 PRODUCT RETURN
- 27 TECHNICAL ASSISTANCE