Setup: Click on this button to enter the printer setup window to configure your print options.
Preview: Click this button for a print preview on your computer screen. To save this report, press the button that looks like a floppy disk when in the preview mode. When you wish to print the report, got to File > Print >
Saved Report
.
Print: Click this button to print the account reports to an attached printer.
(M u st h ave A larm M o n ito rin g M o d u le to U se)
The sophisticated Alarm Monitoring Module expands the capabilities of the Alarm List present in
Remote Link by allowing you to receive Opening and Closing Reports, and other system events such as
Door Access events. You can then use the module to print these reports for clients.
The Alarm Monitoring Module expands the services you can offer to your clients by providing them an easy way to receive Opening and Closing Reports. After you print the reports using the Alarm
Monitoring Module, clients will be able to easily review their opening/closing events and door access events.
To obtain optimum results from the Alarm Monitoring Module, it is highly recommended that you install the software on a computer dedicated solely to the Alarm Monitoring Module and Remote Link.
Contact your dealer or visit http://www.dmp.com
for more information about this product.
(M u st h ave A larm M o n ito rin g M o d u le to U se)
S y stem > A larm L ist
The Alarm List allows operators to receive and process signals from subscriber accounts. You may view the Alarm List at any time by pressing the F3 key, or by opening System > Alarm List.
Note: You must log on to Remote Link before viewing and acknowledging any messages.
With Remote Link, you have the ability to monitor multiple accounts from one Alarm List window. You can view the Alarm List while other Remote Link windows are open. If an alarm signal is received while you have other windows open, the Alarm List will automatically come to the front of all other windows. If you do not have the Alarm List window open and a new message is received, Remote Link will automatically open the Alarm List and select the new alarm message.
An audible alert tone will sound on your computer's internal speaker when an a message is received in the Alarm List. This tone will continue to sound until all messages in the Alarm List have been acknowledged. Acknowledge alarm signals by pressing F6 or the
Acknowledge button. Remote Link will
automatically close the Alarm List after all messages have been acknowledged.
If an operator is not logged on when an alarm is received, Remote Link will sound an audible alert tone and display the message "Unacknowledged Alarms: X" in red text at the bottom of the screen. "X" represents the number of unacknowledged alarms currently in the Alarm List.
Alarm List Description
Organization of the Alarm messages
General Information
© 2015 Digital Monitoring Products
Location Information
Extended Information
Visible Alarms
Command Buttons
(M u st h ave A larm M o n ito rin g M o d u le to U se)
S y stem > A larm L ist
The Alarm Monitoring Module expands the capability of the Alarm List already in Remote Link by giving you the ability to print Opening and Closing Reports, and Door Access Reports.
You can print Door Access and Opening/Closing events from the Alarm List in two ways:
Go to File > Print > Events.
Go to System > Alarm List and press the Print button.
Note: Printing through the Alarm List window will print the active account in the Alarm List.
Printing from File > Print > Events will print the account active in Remote Link.
After pressing the Print button or selecting Print > Events, the Event Reports Setup dialog box will appear containing the following fields:
Summary: Select Summary to print a report of events sorted by account number.
Customer Mailout: Select Customer Mailout when printing reports to send to customers. This option sorts the events by account and automatically breaks the pages when a new account is detected allowing you to mail the reports to each customer.
Account: Enter the range of account numbers you wish to print. Enter the receiver number then the account number, for example 1-12345 with 1 being the receiver number and 12345 the account number. Check All to print all account records. The Account field defaults to the active account in Remote Link, if selecting File > Print > Events as described above.
Date: Click the arrow to the right of the field to open the drop-down calendar, as shown above.
Click on the date to select the desired date. You may also type in the appropriate date.
Selecting All will print all of the dates for the selected record.
Messages in the Report: You can select which messages you would like to print.
(M u st h ave A larm M o n ito rin g M o d u le to U se)
S y stem > A larm L ist
Check the box next to the event type that you would like to print. You may select any combination of the following event types:
Alarm
Trouble
Restoral
System
Open/Close
Other (such as Door Access, Bypass events, code changes, etc.)
© 2015 Digital Monitoring Products
