INSTALLATION. AT&T 260, Trimline 260

AT&T 260 gives you access to essential phone features and Caller ID capabilities.

Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even when you’re on another call. It can provide the caller’s number, or the caller’s name and number, and allows you to store this information to review later. The screen can display all calls received, only those you did not answer, or only repeat calls, and you can choose whether repeat calls are combined with the original call information or listed separately.

For easy dialing, you can store up to 30 phone numbers in the phone's memory. You can also set up one-touch dialing for frequently called numbers, making it quick and easy to reach the people you call the most.

260book_1ATT 4/24 4/24/02 6:24 PM Page 3

INSTALLATION

Battery Installation

This telephone requires four AA batteries (not included) in order for the

Caller ID with Call Waiting, Memory, and New Call light to work. For best results use alkaline or heavy duty batteries

1 Press on the tab to remove the battery compartment cover.

Battery compartment cover

2 Install four AA batteries (not included) in the battery compartment.

3 Replace the battery compartment cover by aligning the bottom tabs on the cover with the slots on the base and snapping into place.

Battery compartment recess for easy battery removal

NOTE: Once the batteries are installed, the screen will show 12:00 and the clock will begin to run. The clock will be reset to the correct time when the first Caller ID data is received.