Power windows. Mercedes-Benz SL 65 AMG, 2005 SL-Class, 2000 SL 500, SL 600, SL 55 AMG, SL Class 2005, SL-Class, SL 500

Add to My manuals
474 Pages

advertisement

Power windows. Mercedes-Benz SL 65 AMG, 2005 SL-Class, 2000 SL 500, SL 600, SL 55 AMG, SL Class 2005, SL-Class, SL 500 | Manualzz

Controls in detail

Power windows

Power windows

Opening and closing the windows

The side windows are opened and closed electrically. The switches for all the side windows are on the driver’s door. The switch for the passenger side is on the passenger door.

1 Left front and rear windows

2 Right front and rear windows

Warning!

G

When closing the windows, make sure that there is no danger of anyone being injured by the closing procedure.

The closing of the door windows can be immediately halted by releasing the switch or, if the switch was pulled past the resistance point and released, by either pressing or pulling the respective switch.

If the window encounters an obstruction that blocks its path in a circumstance where you pulled the switch past the resistance point and released it to close the window, the automatic reversal function will stop the window and open it slightly.

If the window encounters an obstruction that blocks its path in a circumstance where you are closing the window by pulling and holding the switch, by pressing and holding button

‹ on the SmartKey, or by pressing and holding the lock button

(vehicles with KEYLESS-GO*) on the door handle, the automatic reversal function will not operate.

When leaving the vehicle, always remove the

SmartKey or the SmartKey with

KEYLESS-GO* from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment can cause an accident and/or serious personal injury.

왘 Switch on the ignition ( 컄 page 36).

i

You can also open or close the windows using the

, button on the control panel of the automatic climate control ( 컄 page 187).

193

Controls in detail

Power windows

Opening the windows

왘 Press switch 1 or 2 to the resistance point.

The corresponding window will move downwards until you release the switch.

i

If the hardtop is open, the respective rear window will open automatically as soon as the front window is completely open.

Closing the windows

왘 Pull switch 1 or 2 to the resistance point.

The corresponding window will move upwards until you release the switch.

Warning

G

If you pull and hold the switch up when closing the window, and upward movement of the window is blocked by some obstruction including but not limited to arms, hands, fingers, etc., the automatic reversal will not operate.

Opening the rear windows if the hardtop is closed:

Open the front window.

Press switch 1 or 2 to the resistance point again.

The corresponding rear window will open completely.

Closing the rear windows if the hardtop is closed:

왘 Close the front window.

왘 Pull switch 1 or 2 to the resistance point again.

The corresponding rear window will close completely.

Fully opening the windows

(Express-open)

왘 Press switch 1 or 2 past the resistance point and release.

The corresponding window opens completely.

i

If the hardtop is open, the respective rear window will open automatically as soon as the front window is completely open.

194

advertisement

Related manuals

advertisement

Table of contents