1.5 Power On / Off. Merlin Home Multimedia Center Premium

1.5 Power On / Off

Power On

After connecting the DC IN jack and press the power button on the front panel, the player will soon enter the home screen, and the power indicator will turn blue.

Power Off

Press the power button on the front panel, the player will soon enter standby mode, and the power indicator will turn red. Then unplug the power cord to cut off the power supply.

1.6 Menu Language

The system language of this player can be set to English or other languages. Change the language you wish in the setup menu, the selected language will take effect immediately.

1.7 HDD Format

For users who wish to install a new SATA HDD into the player, please refer to the following procedures to format the hard disk on the player before usage.

- Step 1: Select OK on the Warning page, press ENTER to confirm.

Note : This page can be also accessed via Setup -> System -> HDD Format menu.

11

- Step 2: Press the up / down button to adjust the capacity of time shift buffer.

Press the left / right button to select Next, and the enter button to confirm.

- Step 3: Select Format , press ENTER , and then hard disk format will start.

The formatting procedure will be finished within a few minutes. And then you can use the hard disk properly on the player.

Note : HDD format will remove all data stored on the hard disk drive. Please take care and backup your data in advance!

12