HOW TO ORDER REPLACEMENT PARTS

To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give the following information:

• The MODEL NUMBER of the product (30514.0)

• The NAME of the product (PROFORM 400 GI treadmill)

• The SERIAL NUMBER of the product (see the front cover of this manual)

• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and PART LIST in the center of this manual)

27

REMOVE THIS PART LIST/EXPLODED

DRAWING FROM THE MANUAL!

LIST FROM THE MANUAL

Save this EXPLODED DRAWING and PART LIST for future reference.

Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of the User’s Manual.

PART LIST—Model No. 30514.0

R0705A

Key

No.

Qty.

Description

7

8

5

6

3

4

1

2

9* 1

10 1

11 1

1

1

2

1

1

1

1

6

12

13

2

5

Hood

3/4” Screw

Motor Belt

Motor Tension Bolt

Incline Nut

Motor Star Washer

Flywheel

Drive Motor

Motor Assembly

Reed Switch

English Latch Warning

Decal

Frame Spacer

Frame Pivot

Nut/Motor Nut

Frame Pivot Bolt 14

15

36

37

38

39

16

17

18

19

20

21

2

4

1

1

2

1

2

1

Walking Platform

Screw

Foot Rail

Front Roller/Pulley

Magnet

Motor Pivot Bolt

Motor Bracket Bolt

Right Foot Rail

22

23

28

29

30

31

24

25

26

27

3

1

2

1

4

6

1

1

1

2

Endcap

Hood Clip

Front Roller

Adjustment Bolt

Isolator Screw

Ground Screw

Platform Nut

Fan Grill (Back)

Motor Tension Nut

Storage Latch

Latch Catch

Rear Endcap Pad

32 2 Wheel Nut

33 12 Hood Screw

34

35

1

1

Left Grip Plate

Latch Decal French

3

6

1

2

Right Grip Plate

3” Bolt

Washer

1” Tek Screw

Key

No.

Qty.

Description

40 1

41 1

42 1

43 1

44 1

45 2

46 1

47 1

Small Star Washer iFIT.com Wire

Upright Wire

Console

Latch Spacer

Isolator

Book Holder

Console Base

48 6 1/2” Screw

49 18 Hood Screw/

50 1

51 1

52 1

53 1

Endcap Screw

Key/Clip

Incline Motor

Incline Stop Bracket

Incline Motor

Bolt (lower)

54 2

55 1

56 1

57 4

Incline Pivot Bolt

Motor Mount Bracket

Motor Controller Wire

Base Pad

58 4

59 1

60 1

61 2

62 2

3/4” Tek Screw

Controller

Lift Frame

Extension Leg Pad

Extension Leg

Warning Decal

Extension Leg

2” Bolt

63 2

64 2

65 2

66 2

67 4

68 2

69 1

70 1

Extension Leg Endcap

Wheel

U-Nut

8” Cable Tie

Upright

Grommet

Left Handrail

Right Handrail

71 1

72 1

73 4

74 1

75 1

76 1

77 1

78 1

79 1

80 1

Endcap Screw

Left Foot Rail Endcap

Silver Ground Screw

Static Warning Decal

Rear Ground Wire

3/8 x 1” Bolt

Power Cord Assembly

Front Roller Nut

Key

No.

Qty.

Description

#

#

#

#

#

#

93 1

94 1

95 1

96 1

97 2

98 2

99 1

100 1

101 2

102 1

103 2

104 1

105 1

106 1

107 1

# 1

1

1

1

1

1

1

81

82

83

84

85

86

87

88

89

90

91

92

1

2

7

1

1

1

1

1

1

1

1

2

Belly Pan

Belt Guide

Belt Guide

Screw/Controller

Screw

Fan

Rear Roller

Frame

Walking Platform

Console Warning

Decal

Front Ground Wire

Small Nut

Sensor Clip

Rear Roller

Adjustable Bolt

Right Rear Endcap

Allen Wrench

Left Rear Endcap

Walking Belt

5/16” Star Washer

4” Bolt

Filter Wire

Pulse Plate, Left

Isolator Cushion

Hole Plug

Handrail Endcap

Pulse Plate, Right

Optic Disk

Small Nut

Photo Switch

4” Black Wire, M/F

8” Blue Wire, 2F

4” Blue Wire, 2F

4” Blue Wire, M/F

6” Green Wire, F/R

4” Red Wire, M/F

15” Incline Sensor

Wire

User’s Manual # 1

*Includes all parts shown in the box.

#These parts are not illustrated.

LIMITED WARRANTY

WHAT IS COVERED—The entire PROFORM ® material and workmanship.

XP 590s treadmill (“Product”) is warranted to be free of all defects in

WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.

HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), extends a four (4) year warranty on the frame welds. All mechanical and electrical components are covered for one (1) year after the date of purchase. The motor is covered for one (1) year after the date of purchase. Labor is covered for one (1) year after the date of purchase.

WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our option, we will replace the Product.

WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain as set out in your User’s Manual (“Manual”). This warranty does not extend to products used for commercial or rental purposes.

WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the

Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.

USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product.

Remember to do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.

HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-936-4266 and tell them your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for service where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by warranty.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature.

Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.

No one is authorized to change, modify or extend the terms of this limited warranty.

This warranty gives you specific legal rights and you may have other rights which vary from state to state.

ICON OF/DU CANADA, INC, 900 de l’Industrie, St-Jérôme, QC, J7Y 4B

Part No. 225620 R0705A Printed in Canada © 2005 ICON IP, Inc.