ABOUT YOUR MT. Altinex MT108-102, MT108-103

MULTITASKER

ABOUT YOUR MT108-103

MT108-103

1-In, 4-Out Balanced Stereo Audio DA

2

The MT108-103 is a Stereo, Audio Distribution

Amplifier Card that allows the connection of a single stereo, audio source to four receiving devices. All inputs and outputs are balanced, allowing longer cable runs and superior noise reduction.

As a “transparent” distribution amplifier, this card utilizes AC coupling on its input for ideal signal transfer characteristics. The power indicator on the card doubles as a signal detection indicator, allowing easy troubleshooting in complex configurations. Each card requires only a single slot in the MultiTasker enclosure.

The MT108-103 also has the ability to turn its outputs on or off independently using RS-232 commands sent to the MultiTasker from a control system or from the enclosure’s front panel keys.

TECHNICAL SPECIFICATIONS

Specifications are subject to change.

See www.altinex.com

for up-to-date information.

FEATURES/

DESCRIPTION

GENERAL

Inputs

Input Connectors

Outputs

Output Connectors

Compatibility

MT108-103

1

5-pin terminal block (1)

4

5-pin terminal block (4)

Balanced Stereo Audio

Table 1. MT108-103 General

3

MECHANICAL

Enclosure Slots Required

T° Operating

T° Storage

Humidity

MTBF (calc.)

Table 2. MT108-103 Mechanical

MT108-103

1

10°C-40°C

0 to 50°C

90% non-condensing

40,000 hrs

ELECTRICAL

Audio Input

Impedance

Coupling

Audio Throughput

Gain

Frequency Response

Audio Output

Level, Each Channel

Impedance

Power (from enclosure)

+6V

-6V

+13V

-13V

Total Power

0 dB ± 0.5 dB

20Hz to 20kHz ± 0.5 dB

Table 3. MT108-103 Electrical

MT108-103

10k

Ω

AC

1 Vp-p

600

Ω

100 mA (0.6 W)

50 mA (0.3 W)

210 mA (2.7 W)

200 mA (2.6 W)

6.2 W

400-0162-003 3