1.2 Setting and Using the Hand Strap and Stylus. Denso BHT-400B-CE, 400BW-CE, BHT-400BW-CE

1.2 Setting and Using the Hand Strap and

Stylus

„ Setting the hand strap

Hand strap

„ Using the hand strap

Put your hand through the hand strap and hold the BHT as shown below. This will prevent you from dropping the BHT accidentally.

Hand strap

4

„ Setting the stylus

stylus

Chapter 1 Quick Guide

Hand strap

„ Using the stylus

The BHT has a touch screen LCD. With the stylus that comes with the BHT, you can operate keys, menus, and icons displayed on the touch screen.

Before using the touch screen, be sure to set it up. (Refer to Chapter 2, Section 2.3.2, "Setting-up 2:

Calibrating the touch screen.")

• Always use the stylus to operate the touch screen. Do not use your fingernails or any pointed or hard object or apply a strong pressure or impact to the LCD.

• Before operation, clean the surface of the LCD and the tip of the stylus if dirty. Using dirty ones will scratch the LCD surface or prevent the stylus from sliding smoothly.

„ Operating the touch screen

Action

Tap

Double-tap

Drag

Description

Refers to touching the LCD once.

(Functionally equivalent to "click" with a mouse on a PC.)

Refers to quickly touching the LCD twice.

(Functionally equivalent to "double-click" with a mouse on a PC.)

Refers to moving the stylus to the object while touching the LCD.

(Functionally equivalent to "drag" with a mouse on a PC.)

5