- Computers & electronics
- Networking
- B&B Electronics
- RS-232 to Ethernet Converter ES1A
- Product information
advertisement
6. Configure the ES1A
Getting Started
In the Configuration, Serial Ports page select the Port Profile you require for use with your application (E.g. RealPort for virtual COM port, TCP Server,
UDP server, Serial Bridge, etc)
Configure the serial port settings for the selected Port Profile (E.g. In TCP
Sockets select client or server, TCP port numbers, etc.) Also configure baud rate, data bits, etc in Basic Serial Settings.
Configure any required alarms and notification
If RealPort profile was selected (virtual COM port) do the next step (Set up
VCOM)
7. Set up VCOM (if using the RealPort profile)
Start the RealPort software wizard (located on the included CD)
Select Add a New Device
Select your ES1A from the list
Select an unused COM port number
Follow the wizard to set up a virtual COM port
8. Communicate
Configure and then start your application
Manual Documentation Number ES1A -5012m pn6909-rev003
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 11 CHAPTER 1: INTRODUCTION
- 11 Direct IP
- 11 Virtual COM Port
- 11 Paired Mode
- 12 Other Communications Modes
- 13 CHAPTER 2: HARDWARE OVERVIEW
- 14 Link Integrity LED (Yellow)
- 14 Network Activity LED
- 14 Reset Switch
- 14 Ethernet Port Connector
- 15 Serial Port Connector
- 15 Power Connector
- 15 Configuration Connections
- 16 CHAPTER 3: GETTING STARTED
- 16 Check the contents of your ES1A package. It should contain
- 16 Set up the Hardware
- 16 Power it Up
- 16 Get the IP Address
- 16 Login
- 17 Configure the ES1A
- 17 Set up VCOM (if using the RealPort profile)
- 17 Communicate
- 18 CHAPTER 4: CONFIGURING THE IP ADDRESS
- 20 INTERFACE
- 22 IP Settings
- 22 Network Services Settings
- 22 Advanced Network Settings
- 23 Port Profile Settings
- 28 Basic Serial Settings
- 28 Advanced Serial Settings
- 29 Alarm Notification Settings
- 29 Alarm Conditions
- 30 Alarm Destinations
- 31 CHAPTER 6: MANAGING THE ES1A
- 31 Device Identity Settings
- 31 Simple Network Management Protocol (SNMP) Settings
- 31 Changing the Root Username and Password
- 32 Adding New Users
- 32 Configuring User Access and Permissions
- 33 Serial Ports
- 33 Connections
- 34 CHAPTER 7: USING ADMINISTRATIVE FEATURES
- 35 General
- 35 Serial
- 36 Network
- 38 CHAPTER 8: USING REALPORT
- 38 Configuring the IP Address
- 38 Configuring the Serial Port for RealPort
- 39 Adding a Virtual COM Port using RealPort
- 39 Removing a Virtual COM Port using RealPort
- 40 Updating RealPort
- 41 APPENDIX A: DEFAULT CONFIGURATION SETTINGS
- 42 APPENDIX B: PRODUCT SPECIFICATIONS
- 44 APPENDIX C: DIMENSIONAL DIAGRAMS
- 45 APPENDIX D: RS-232 CONNECTIONS
- 46 APPENDIX E: NETWORK CONNECTIONS