Step 2 Insert
Insert the Card into your Computer
2.1
After the software installation is finished, the message “Please plug in your Notebook Card now” will appear. Insert your Card.
2.2
The Found New Hardware Wizard will appear. (This may take 3–15 seconds.) Select “Yes, this time only” and click “Next” to install the hardware.
2.3
Select “Install the software automatically” and click “Next” to install the hardware.
Installing and Setting up the Card
2.4
The Wizard will now install your software.
2.5
You might see a screen similar to this one. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select
“Continue Anyway” and follow the on-screen instructions.
2.6
The installation is now complete.
Click “Finish” to exit.
3
4
1
2
5
6
