advertisement
Calibrating the Screen
If your screen needs to be calibrated because when you touch it nothing happens take the following steps.
1. Place the USB stick into your computer.
2. Go to www.husqvarnaviking.com.
3. Select Quilting, Platinum TM 3000.
4. On the right side menu select “Calibrating Your Screen”
5. Download file reset.cal to the USB stick.
6. Safely remove the USB stick from your computer after the file has downloaded.
7. Power on the quilting machine.
8. Plug the USB stick into the USB port located on the left side of the LCD screen (fig. 51).
9. The quilting machine will begin to read the file and it will start the calibration.
10. Follow the instructions on your screen to calibrate your screen.
11. The quilting machine will restart, once the machine has booted back up the screen will be calibrated.
12. Once the calibration is complete the file reset.cal will automatically be removed from the USB stick.
USB Port
Fig. 51
28
advertisement
Related manuals
advertisement
Table of contents
- 6 Machine Overview
- 7 Machine Assembly
- 8 Attaching Handle Bars
- 8 Attaching LCD Screen
- 9 Connecting Cable Wires
- 10 Attaching Thread Stand
- 11 Getting Started - Touch Screen Overview
- 12 Home Menu
- 12 Stitch Modes
- 15 Lights Menu
- 15 File Menu
- 15 Calculator
- 16 Save Settings
- 16 Diagnostics
- 18 Sewing Parameters
- 19 Measure
- 20 Updating Platinum
- 21 Machine Operations
- 22 Cleaning & Oiling
- 22 Bobbin Winder & Bobbins
- 26 Threading the Machine
- 27 Changing the Needle
- 28 Calibrating the Screen
- 29 Tips & Troubleshooting
- 33 Warranty