4.1.2.2 Standard Push Button Configuration (A/B Selector). Magnetek Enrange CAN-6
Add to my manuals
44 Pages
advertisement
4.1.2.2 Standard Push Button Configuration (A/B Selector)
There are four (4) different types of A/B selector sequences available on the Flex system. Choose the one that is most suitable for your application. selector :
Type-B selector sequence
Type-C selector sequence
Type-D selector sequence
:
:
:
A+B A → B →
Off → A → B → Off → A → B …
A → B → A+B → A → B → A+B …
Off → A → B → A+B → Off → A → B → A+B …
DIP PB5 PB6 PB7 PB8
6
00101111 Normal Normal A/1&2 Normal
7
8
00110000 Normal Normal B/1&2 Normal
00110001 Normal Normal C/1&2 Normal
9
00110010 Normal Normal D/1&2 Normal
10
00110011 Normal Normal Normal A/3&4
11
00110100 Normal Normal Normal B/3&4
12
00110101 Normal Normal Normal C/3&4
13
00110110 Normal Normal Normal D/3&4
14
00110111 Normal Normal A/1&2 A/3&4
15
00111000 Normal Normal A/1&2 B/3&4
16
00111001 Normal Normal A/1&2 C/3&4
17
00111010 Normal Normal A/1&2 D/3&4
18
00111011 Normal Normal B/1&2 B/3&4
19
20
21
22
00111100 Normal Normal B/1&2
00111101 Normal Normal B/1&2
00111110 Normal Normal C/1&2
00111111 Normal Normal C/1&2
C/3&4
D/3&4
C/3&4
D/3&4
23
01000000 Normal Normal D/1&2 D/3&4
Normal Normal momentary contact
A/1&2…D/3&4 A/B Selector type with designated LED Display (LED 1&2 or LED 3&4)
Flex 8EX System Instruction Manual
December 2013
Page 19 of 44
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 1. INTRODUCTION
- 7 2. RADIO CONTROLLED SAFETY
- 8 2.1 CRITICAL INSTALLATION CONSIDERATIONS
- 8 2.2 GENERAL
- 8 2.3 PERSONS AUTHORIZED TO OPERATE RADIO CONTROLLED CRANES
- 9 EQUIPMENT OPERATORS
- 10 2.5 TRANSMITTER UNIT
- 10 2.6 PRE-OPERATION TEST
- 11 2.7 BATTERIES
- 11 2.8 BATTERY HANDLING
- 11 2.9 BATTERY CHARGING
- 11 2.10 BATTERY DISPOSAL
- 12 2.11 SPECIFIC SYSTEM WARNINGS
- 13 3. GENERAL SYSTEM INFORMATION
- 13 3.1 TRANSMITTER HANDSET
- 13 3.1.1 External Illustration (Standard Push Button Configuration)
- 14 3.1.2 Internal Illustration
- 15 3.2 RECEIVER UNIT
- 15 3.2.1 External Illustration
- 16 3.2.2 Internal Illustration
- 17 4. FUNCTION SETTINGS
- 17 4.1 TRANSMITTER HANDSET
- 17 4.1.1 System Channel Settings
- 18 4.1.2 Push Button Functions with LED Displays
- 18 4.1.2.1 Standard Push Button Configuration (Transmitter Toggle)
- 19 4.1.2.2 Standard Push Button Configuration (A/B Selector)
- 20 4.1.2.3 Inline Push Button Configuration (Transmitter Toggle)
- 21 4.1.2.4 Inline Push Button Configuration (A/B Selector)
- 22 4.1.3 Channel Change via Push Buttons
- 23 4.1.4 Optional 4-Digit Security Code
- 24 4.1.5 I-CHIP
- 25 4.2 RECEIVER UNIT
- 25 4.2.1 System Channel Settings
- 26 4.2.2 Output Relay Configurations
- 26 4.2.2.1 Output Relay Types
- 26 Speed
- 27 4.2.2.3 ON/OFF Push Button Function
- 28 4.2.2.4 START/AUX Function
- 28 4.2.2.5 Magnet ON/OFF Push Button Function
- 28 4.2.2.6 Brake Function
- 28 4.2.2.7 Momentary Contact
- 28 4.2.2.8 Toggled Contact
- 28 Speed Push Button Function
- 29 4.2.2.10 Auxiliary STOP Push Button Function
- 29 4.2.2.11 Pitch & Catch Function
- 29 4.2.3 Receiver Auto-Scanning Settings
- 30 4.2.4 Dip-Switch Settings
- 30 4.2.4.1 Interlocked Functions
- 31 4.2.4.2 Non-Interlocked Functions
- 32 4.2.5 Jumper Settings
- 33 4.2.6 I-CHIP Programming Port
- 33 4.2.7 Voltage Settings
- 34 5. SYSTEM CHANNELS TABLE
- 35 6. RECEIVER INSTALLATION
- 35 6.1 OUTPUT RELAY CONTACT DIAGRAM
- 36 6.2 PRE-INSTALLATION PRECAUTIONS
- 36 6.3 STEP-BY-STEP INSTALLATION
- 37 6.4 SYSTEM TESTING
- 38 7. OPERATING PROCEDURE
- 38 7.1 TRANSMITTER OPERATION
- 38 7.1.1 General Operating Procedure
- 39 7.1.2 A/B Selector Push Button Operating Procedure
- 39 Speed Push Button Operating Procedure
- 40 7.1.4 Pitch & Catch Operating Procedure
- 40 7.1.5 Automatic Channel Scanning Operating Procedure
- 40 7.1.6 Changing Transmitter Batteries
- 41 7.2 STATUS LIGHT INDICATORS & WARNINGS
- 41 7.2.1 Transmitter STATUS Light Indication
- 42 7.2.2 Receiver STATUS Light Indication
- 42 7.2.3 Receiver SQ Light Indication
- 42 7.2.4 Receiver POWER Light Indication
- 42 7.2.5 Receiver COM Light Indication
- 43 7.3 TROUBLESHOOTING TIPS
- 44 8. SYSTEM SPECIFICATIONS