Programming Next Regist in Registration Sequence. Yamaha ELS-01C, ELS-01
Add to my manuals
Yamaha ELS-01C offers various features to enhance your musical experience. With the Music Data Recorder, you can independently record and recall registrations, user voices, keyboard percussion settings, user rhythms, and rhythm sequences. The Rhythm Sequence Program function allows you to program the Next Regist function in Registration Sequences, ensuring smooth transitions during performances. Additionally, you can connect the ELS-01C to the Internet via wireless LAN, enabling you to access websites and explore online resources for music and inspiration.
advertisement
Rhythm Sequence Program
Programming Next Regist in Registration
Sequence
Reference Pages
Next Regist Settings (page
109)
Programming a Registration
Sequence (page 175)
You can program the Next Regist function in Registration Sequences. Using this function, the next registration data in current song can be loaded automatically just by playing the rhythm sequence.
Registration Sequence display
NOTE
If you are loading a
Registration while a rhythm is playing, the sequence data and User rhythms in the Registration data cannot be loaded.
1 2
1 SET
For replacing a Registration number (or Next Regist) at the cursor position to Next
Regist. This button is useful when you want to change the timing of the Next Regist function. For details, see next page.
2 INSERT
For entering Next Regist data in the Registration Sequence.
Entering Next Regist
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
NOTE
Although you move the cursor to the Next Regist mark in the display, the next registration data will not be loaded.
1
2
Using the buttons in the display or the Data Control dial, set the Bar/Beat/Clock position at which you want to enter the Next Regist (1 beat = 96 clock).
Press the NEXT REGIST [INSERT] button in the display.
The Next Regist mark ( ) appears in the display in the timing you set in step
#1, indicating that the Next Regist is entered.
4 ELS-01/01C Version 1.6 New Functions
Editing an Existing Next Regist
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can move the entered Next Regist, or delete the Next Regist from the sequence.
To move an entered Next Regist:
1 Move the cursor and select the Next Regist you want to move.
2 Change the position by pressing the Bar/Beat/Clock buttons in the display.
3 Press the NEXT REGIST [SET] button in the display.
The Next Regist position is changed and displayed in the proper order.
To erase an entered Next Regist:
1
Move the cursor and select the Next Regist you want to delete.
2
Press the [DELETE] button to delete the Next Regist.
Next Regist Loading Time
• Loading Next Regist may take a few seconds (the time may differ depending on the size of the data to be loaded).
• When using a floppy disk instead of SmartMedia card, the loading time will be longer than when using SmartMedia.
• Next Registration data can be loaded by two ways: using right footswitch and programming Next Regist in the Registration Sequence. Loading time is the same regardless of which way you load the Next Registration data.
ELS-01/01C Version 1.6 New Functions 5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement