Appendix A Specifications
A.1 Digital Input/Output
Channels
Programming
Mode
Input Voltage
Output Voltage
+5V Output
Interrupt Mode
A.2 Counter
48 Bi-directional (24 for USB-4751L)
8255 PPI Mode0
Low 0.8 V max
High 2.0 V min
Low 0.5 V max. @ 12mA (sink)
High
3.8 V min. @ -12mA (source)(each line)
3.8 V min.@5mA(source)(high of every line)
100mA max.
PC0 source; PC4 gate/PC0 source
Channels
Resolution
Compatibility
Base Clock
Frequency measurement
PWM Generation
External Input Divide
A.3 General
2 independent
32-bit counters (low 16bit by hardware and high 16bit by ARM)
TTL compatible logical level input
External 8MHz max.
2 independent programmable clock sources
Internal 20MHz max.
Input frequency from 0.1Hz to 10Mhz
2Hz to 10Mhz
2 to 65535
I/O Connector Type
Dimensions
Power
Consumption
Temperature
Relative Humidity
Opto-22 * 2 and 10-pin screw terminal *1
132 X 80 X 32 mm (5.2” X 3.2” X 1.3”)
5 V @ 500 mA max.
Operation 0~60° C (32~140° F) (refer to IEC 68-2-1, 2)
Storage -20~70° C (-4~158° F)
5%~95% RH non-condensing (refer to IEC 68-2-1, 2)
USB-4751/4751L User Manual 18