Remote Management. Asus DGN1000, Book Size PC System Genie, DGN1000 - Wireless-N Router With Built-in DSL Modem, N150

N150 Wireless ADSL2+ Modem Router DGN1000

The PIN function might temporarily be disabled when the wireless modem router detects suspicious attempts to break into the wireless modem router’s wireless settings by using the wireless modem router’s PIN through WPS. You can manually enable the PIN function by clearing the Disable Router’s PIN check box.

Keep Existing Wireless Settings. By default, the Keep Existing Wireless Settings check box is selected. This allows the modem router to keep the same SSID and wireless security settings when WPS-enabled devices are added to the network.

If the Keep Existing Wireless Settings check box is not selected, the next time you use WPS to connect WPS-capable devices to your wireless network, the modem router generates a new random SSID and WPA/WPA2 passphrase. NETGEAR does not recommend this.

Remote Management

The Remote Management screen lets you allow a user or users on the Internet to configure, upgrade, and check the status of your wireless modem router.

 To configure remote management:

1. Select Advanced > Remote Management to display this screen:

2. Select the Turn Remote Management On check box.

3. Specify the external addresses of wireless modem routers than can access remote management. For security, restrict access to as few external IP addresses as practical:

Advanced Settings

80