terminals. Aiwa 46UX600U, 40UX600U, 55UX600U, XK-005 - SERVICE

Chapter 10: Appendix

Acceptable signal formats for PC IN and HDMI terminals

PC IN signal formats

Note:

• The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as shown in the table below. Since some PCs input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur: incorrect display, false format detection, picture position failure, blur, or judder. In this case, set the monitor output format on your PC to conform to any signals in the table below.

• The signals whose vertical frequency are 56 Hz,70 Hz, 72 Hz, or 75 Hz are converted to 60 Hz signal.

• When you connect a PC to this TV, it is recommended to set the refresh rate of your PC to 60 Hz.

• The PC IN on this TV does not accept the Sync on Green, Composite Sync and Interlace signals.

Format

VGA

SVGA

XGA

WXGA

SXGA

Resolution

640 × 480

800 × 600

1024 × 768

1280 × 768

1360 × 768

1280 × 1024

V. Frequency

59.940/60 Hz

72.809 Hz

75.000 Hz

56.250 Hz

60.317 Hz

72.188 Hz

75.000 Hz

60.004 Hz

70.069 Hz

75.029 Hz

59.995 Hz

59.870 Hz

74.893 Hz

60.015 Hz

60.020 Hz

75.025 Hz

H. Frequency Pixel Clock Frequency

31.469/31.500 kHz 25.175/25.200 MHz

37.861 kHz

37.500 kHz

35.156 kHz

37.879 kHz

31.500 MHz

31.500 MHz

36.000 MHz

40.000 MHz

48.077 kHz

46.875 kHz

48.363 kHz

56.476 kHz

60.023 kHz

47.396 kHz

50.000 MHz

49.500 MHz

65.000 MHz

75.000 MHz

78.750 MHz

68.250 MHz

47.776 kHz

60.289 kHz

47.712 kHz

63.981 kHz

79.976 kHz

79.500 MHz

102.250 MHz

85.500 MHz

108.000 MHz

135.000 MHz

VESA Standard (DMT)

88

VX1A00155600_UX600U_EN.pdf 88 2010/01/15 19:54:44