- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power adapters & inverters
- Sharp
- JH-1600E
- Specification
Display Panel. Sharp JH-1600E
Add to My manuals27 Pages
Sharp JH-1600E solar power inverter is a grid-interactive device that converts DC electricity from photovoltaic (PV) modules into AC power for home use. It features anti-islanding protection in accordance with AS 4777 and a detector circuit to sense ground faults. Installation must be done by a licensed electrical contractor according to AS/NZS 5033 and AS/NZS 3000 standards.
advertisement
Display Panel
Monitoring the Inverter
ON-GRID FAULT
W Wh/D kWh V
DC
V
AC
Hz
SOLAR INVERTER JH-1600E
SELECT
ON-GRID LED (Green)
Fault LED (Red)
W LED (Yellow)
Wh/D LED (Yellow) kWh LED (Yellow)
V
DC
LED (Yellow)
V
AC
LED (Yellow)
Hz LED (Yellow)
SELECT button
Flashing = Standby On = ON-Grid
Fault condition (please see more detail in Error / Fault Code list.)
Displays instantaneous power (watts)
Displays watt-hours today
Displays total kilowatt-hours
Displays input PV array voltage instantaneously
Displays output utility voltage instantaneously
Displays output utility frequency instantaneously
Press to cycle through W, Wh/D, kWh, V DC , V AC , Hz
Status Indicator Lights
The inverter is equipped with two status indicator lights (LEDs) located above the front panel 7 segment LED. These
LEDs indicate the inverter current status (the table shown below) and assist in troubleshooting the performance of the unit.
Green
Flash
On
Off
Off
Red
Off
Off
On
Off
Means
Standby - reconnecting
ON-Grid - operating
Fault condition - check code
Sun is down, low DC, no operation
19
advertisement
Related manuals
advertisement
Table of contents
- 2 Conventions Used
- 2 General Safety Precautions for Installation
- 3 Outline of Grid-Interactive Home PV System
- 4 Solar Power Inverter
- 5 Mounting Bracket
- 5 Unpacking Carton Box
- 6 Planning the Installation
- 6 Inverter Location
- 8 Mount the Solar Power Inverter
- 11 Before wiring
- 12 Removing the Front Panel
- 13 Solar Power Inverter Wiring Overview
- 19 Checking the PV Array DC Voltage
- 19 Checking the AC Utility Voltage
- 19 Starting Up the Inverter
- 20 Display Panel
- 20 Status Indicator Lights
- 21 Monitoring the Front Display
- 23 Emergency Stop
- 23 Restart
- 24 Electrical Specification
- 24 Environment Specification
- 24 Mechanical Specification
- 25 How to Set Parameter
- 26 Checking Output Power