advertisement
Screensaver
• Automatic screensaver: to enable/disable the automatic screensaver function, and to set its timeout
• XGA on screensaver:
Enable/disable XGA loop function: “XGA IN” signal sent to “XGA OUT.”
Two possible cases:
1. Active “XGA IN” signal: monitor shows XGA signal.
2. Inactive “XGA IN” signal: no signals on monitor (“Stand By” mode).
Remote control
• Numeric only remote control:
Enable\Disable alphabetical digits only on the remote control
• ID code:
In order to control more systems with only one remote control, you can assign to each system a numeric code (01 to 99), and then consequently set the remote control.
• To configure the system: a. The system code appears in the page b. Is possible modify or save the new code.
• To configure the remote control:
1. Press the “RED” and “GREEN” keys at the same time
2. Wait for “Stand by” key stopping blinking
3. Insert the numeric code (01 to 99)
Call-Answer-Mode
General
This menu contains the following configuration settings:
• Mute selected, at the start-up and after each disconnection system will not transmit audio, an icon will be displayed in the local and remote terminals.
• Do Not Disturb selected, at the start-up and after each disconnection system will not accept incoming calls, an icon will be displayed in the local terminal.
• Video Privacy
Once in connection.
To activate the Video Privacy function, press the “VIDEO PRIVACY” key on the remote control. Local video will no longer be transmitted.
The icon will appear in the video window indicating that the remote terminal is no longer receiving video from local terminal.
Not in connection
Activates/Deactivates:
Video privacy as above.
Do Not disturb System does not answer to incoming calls (busy for the remote)
• Confirm disconnection
Enable/disable confirmation requests for call disconnection.
• Enable Tones
Enable/disable tones in phase of call.
• Automatic answer:
Enable/disable the automatic answer function, after the selected number of rings.
29
advertisement
Related manuals
advertisement
Table of contents
- 6 SAFETY RULES
- 7 ABOUT THIS MANUAL
- 8 ABOUT VEGA X5 SYSTEM
- 10 REMOTE CONTROL
- 13 CABLING SCHEME
- 14 VIDEOCONFERENCE TIPS
- 15 SYSTEM POSITIONING AND INSTALLATION
- 17 OPERATION AND USE
- 23 Dual Video Connection
- 24 Dual Video Disconnection
- 24 Entering Names in the Phonebook
- 25 Modifying and Erasing Phonebook Entries
- 25 Connecting to a global Remote Phonebook
- 28 SYSTEM CONFIGURATION - SETTINGS
- 28 Control panel
- 28 Display
- 29 Screensaver
- 29 Remote control
- 29 Call-Answer-Mode
- 29 General
- 30 Broadcast
- 30 Display Status Bar and Transparency
- 31 Customize colors
- 32 Audio
- 32 Inputs
- 32 Processing
- 32 Outputs
- 33 Video Quality
- 33 Cameras
- 33 Settings
- 33 Customize
- 33 Driver
- 34 Monitor
- 34 Settings
- 35 PiP-PaP
- 36 Plasma
- 41 Data Channels
- 42 Password
- 42 Encryption
- 43 Licenses
- 44 Terminal Settings
- 44 Network interface
- 45 ISDN network interface
- 46 Access Configuration (ISDN BRI Euro)
- 46 Access configuration (ISDN BRI National)
- 46 Access configuration (ISDN PRI Euro)
- 47 Access configuration (ISDN PRI National)
- 48 NIC network interface
- 48 G.703 interface configuration(option whit license)
- 49 NIC (V.35/RS449/RS530/X21) Interface Configuration (Licence Required—see “Licences” for more information)
- 50 IP configuration
- 50 IP Configuration
- 52 H323 Settings
- 52 SIP Settings
- 53 Services
- 56 PPPoE
- 56 Enable network
- 57 Location
- 57 Load default settings
- 59 Slides storage
- 59 Slides recall via WEB client
- 59 Saving slides on a PC
- 60 Technical Specification MCU
- 61 Multiconference Setup
- 62 How to start a multiconference
- 65 Multiconference Management
- 65 MCU control panel icons
- 68 Terminals status during a MCU
- 68 Ending a Multiconference
- 69 Dual Video in MCU
- 69 Terminal test
- 70 Interfaces
- 70 Connection Status
- 71 Hardware
- 71 Software Release
- 72 CONNECTING A PERSONAL COMPUTER
- 73 REMOTE MANAGEMENT
- 74 UPDATING SOFTWARE
- 75 DATA CONFERENCE WITH MICROSOFT NETMEETING 3.XX
- 76 Managing the DataConference software
- 77 APPENDICES
- 83 TROUBLESHOOTING PROBLEMS